Citroen C4 Picasso 1.6 Hdi Timing belt replacement

Поделиться
HTML-код
  • Опубликовано: 26 авг 2024
  • 👉 You can buy timing belt kit from here: amzn.to/3yt9zPE
    Citroen C4 Picasso- timing belt replacement, every 60000 miles (100000 km) or 4 years.
    Our Citroen C4 Picasso , has 1.6 l HDI, inline 4 cylinder 110 hp turbocharged engine.
    But the process is similar for all Citroen diesel engines.
    Timing belt kit replacement includes- belt, pulley, tensioner and water pump.
    I suggest to replace the water pump together with the timing belt if you deside to purchase separately the parts.
    In this video you will see the full process of how to replace Citroen C4 Picasso timing belt and how to tension it properly.
    As most of you know, if you tight to much the timing belt, you will have engine knocking sound and high risk of engine brake down. If the belt is to slack, can be even worst, skipping or teeth jumping can also cause an engine brake down.
    The only special tool you need is the timing pin set, made for these type of engines, so you can lock the engine on timing, when 1st cylinder is in TDC.
    As we know we have common rail system, and does not require a pin to be inserted into the fuel pump gear, but in my video I will insert it because the installation of the new belt is more easy.
    ➡️ Please rate 👍 , comment ✍️ , share 🔗 and subscribe 🔔 for more videos 🎞 : / @superfastdriver
    ➡️ Join our channel 👇 to get access 🗝️ to perks:
    / @superfastdriver
    #CitroenTimingBelt #CitroenC4 #CitroenWaterPump #CitroenC4 #C4 #C4hdi #citroenpicasso #CitroenC4belt #citroënc4

Комментарии • 10

  • @Sedge1962
    @Sedge1962 9 месяцев назад +1

    Super, und sehr anschaulich erklärt! Ich denke man bekommt es auch ohne "Grube" hin.

  • @ShehzalQureshi
    @ShehzalQureshi 2 года назад +2

    nice work done mate.

  • @jdjshsshshshhsbsbszh1607
    @jdjshsshshshhsbsbszh1607 2 года назад +2

    Great job again 💪

  • @Sedge1962
    @Sedge1962 9 месяцев назад

    Do you have the torque specifications for the tensioner, crankshaft bolt, and water pump bolts? Thanks!

  • @mikaelfriberg6141
    @mikaelfriberg6141 Год назад

    har problem med en pcasso bytt remkugg men sen startar han inte är det inställningar på högtryckspump önskar svar mvh micke

  • @knobidecool
    @knobidecool Год назад

    Hier sieht man die durchaus übliche, "RUSSISCHE Hinterhof-Reparatur-Variante..."