there is other my video how set up valve chain. for example if you need to change your piston - there is a way how get back valve chain correctly and not damage valves if you get the chain back wrongly... ruclips.net/video/dWBzfKyVFKw/видео.html
Hello mate, I was just about to ask about it, before you just replied it :).In that video you showed a T symbol under the radiator cover so my question is when the piston is top center that t symbol is appeared isn't it?By the way it would be great to add english subtitle to that video if it is possible and there is also a request by someone who commented on that video, thanks again!
I got the 200th like, and you just saved me $200. I'd like to give you money, sir - also if you can do one for the new Suzuki Address 110cc I'd pay money to see that
Funny thing is, Honda probably built a gazillion of these things as it was quite popular in India, but they wouldn's sell me a damn air filte for it. No longer available. Is there a replacement?
Hey man, Thx for your info, I did most of the maitnenance from the vid I'm now looking to check my front brake system because I hear some friction noise coming from there. Can't find videos about it. Doesn't look like regular disk brakes I find on other videos. Did you do any video on the subject ?
I have a Honda Lead 110cc and i recently change my oil and i broke down today i am sure its because of either a engine problem or me putting the wrong type of oil in it, i used Castrol power 1 10w-40 4t, could you please tell if this is the right type for this bike or not? thank you
How much diff does it make setting exhaust at tdc or bdc? Lets say its .14mm at bdc then if i measure it at tdc how much will.it be?? I could only manage .14mm default setting in a manual. It doesnt mention whether its at tdc or bdc. How do u find bdc in such case!? And if possible if i were to set at tdc compression itself, how much exhaust clearence should i use? And is it bdc expansion or bdc suction?
I am from Iraq. I have a Honda Lead SCV 100. It does not have backup tools. It is also late in operation at times. If possible clarify and what to do thank you. Your friend from Iraq
Iam not sure @@E8ibrahim I know someone did it on some scooters. But you need to buy some spesial KIT with new piston a and cilinder and change it. But I am not sure whether this is available for Honda Lead also. You have to look on internet and if you find something, let me know. :-)
Hi, it is easy. You need to take of 4 screws which are on the tom of mask from the view of driver (under the speed meter). Next two screw you need to take of are from the view under the light - there is a front fender. You will be ready to take of the front mask with light.
That’s brilliant. Exactly what I needed to change the spark plug. Couldn’t have done it without your help, thank you so much!!
possibly the most epic music drops of any how too vid ever heard or seen this has been super helpful cheers!
Thanks a lot. You really made things easy for me.
Hi Kodl Kodlyk! Very well done! Thank you.
thx from france
good video .
thanks a lot, I got all I needed thanks to you!
you are welcome... :-)
there is other my video how set up valve chain. for example if you need to change your piston - there is a way how get back valve chain correctly and not damage valves if you get the chain back wrongly... ruclips.net/video/dWBzfKyVFKw/видео.html
Hello mate, I was just about to ask about it, before you just replied it :).In that video you showed a T symbol under the radiator cover so my question is when the piston is top center that t symbol is appeared isn't it?By the way it would be great to add english subtitle to that video if it is possible and there is also a request by someone who commented on that video, thanks again!
@@kodlyk hey man thanks for the vid I'm new to the bikes and I'm just doing it but how I'd now if the piston is "dead bottom" or up ??????
Thanks so much !!! Me and my friend was trying to change the oil and we done !
We check the air filter to! And was so good.
Thanks again !
You are welcome man!
How much öil must rein ?
@@markomatic6338 700ml - 750mll
Thank you good information 👍
Thanks. Will be doing this soon!!!
Very nice video about to buy one over by someone soon, what should I check for to make sure I don't get ripped off
Škoda, že tam nebolo aj vyčistenie karburátora. Ináč super video.
Thanks it's very clear.
Thanks. Very informative.
I got the 200th like, and you just saved me $200. I'd like to give you money, sir - also if you can do one for the new Suzuki Address 110cc I'd pay money to see that
thanks... it is a good one.
Great video. I just have one question. where do I replace or find the oil filter? cool music too.
Many thanks!
Funny thing is, Honda probably built a gazillion of these things as it was quite popular in India, but they wouldn's sell me a damn air filte for it. No longer available.
Is there a replacement?
Hey man,
Thx for your info, I did most of the maitnenance from the vid
I'm now looking to check my front brake system because I hear some friction noise coming from there. Can't find videos about it. Doesn't look like regular disk brakes I find on other videos. Did you do any video on the subject ?
Thank you for your video.
To be perfect, i would add an images how to put the different piston possitions......... Up and down.
Regards
Very useful video thank you! Just one quick question on valve clearance: does it have to be 0.14mm on cold or warm engine? Thanks in advance!
Cold engine. Good luck! :-)
@@tomaskadlec377 Thank you!
Brilliant ! Helped me loads. Thank you
Het is een zeer good city scooter
is there a service manual that we can dowload?
I have a Honda Lead 110cc and i recently change my oil and i broke down today i am sure its because of either a engine problem or me putting the wrong type of oil in it, i used Castrol power 1 10w-40 4t, could you please tell if this is the right type for this bike or not? thank you
Perfect
Awesome!
Goooood bike
Thank you very very very much ...can u upload how to change back tyre plz
Great video - can you do a video for drive belt replacement pkease?
How much diff does it make setting exhaust at tdc or bdc? Lets say its .14mm at bdc then if i measure it at tdc how much will.it be?? I could only manage .14mm default setting in a manual. It doesnt mention whether its at tdc or bdc. How do u find bdc in such case!? And if possible if i were to set at tdc compression itself, how much exhaust clearence should i use? And is it bdc expansion or bdc suction?
perfect video
Thanks Kodl, great video and very useful. I can't find anywere to find sub air filter, do you know where i can order one? Mine is completly gone.
Hi scooter-man and thank you too. I ordered it through the my Original Honda Shop-Service at my city. Good luck.
I am from Iraq. I have a Honda Lead SCV 100. It does not have backup tools. It is also late in operation at times. If possible clarify and what to do thank you. Your friend from Iraq
Que medida de cojinetes tiene la llanta trasera
Can anyone help me with locating the kickstand of this bike
It doesn't have an oil filter???
Nice video. Could you please tell me where the battery is placed ? Rear or front ?
Battery is under front light. Need to free up 4 screws under speedmeter from side of driver... And another 2 from bottom from front wheel...
Tomáš Kadlec Thanks !
Gear Oil?
i have the same scooter, but mine doesn't reach 100km/h the highest it can get is 80km can i know wheres the problem
Hi, maximum speed 80km/h is normal speed. My scooter drives 80km/h also. I never mentioned that I am reaching 100km/h.
@@kodlyk so is there any way i can make it reach the highest speed, i want to reach 100 is there anyway? thnx
Iam not sure @@E8ibrahim I know someone did it on some scooters. But you need to buy some spesial KIT with new piston a and cilinder and change it. But I am not sure whether this is available for Honda Lead also. You have to look on internet and if you find something, let me know. :-)
@@kodlyk do have watsapp of something?
Спасибо.👍
Hi What number i need for spark ? Please
could you please tell me how to change front light bulb ? Thank you !
Hi, it is easy. You need to take of 4 screws which are on the tom of mask from the view of driver (under the speed meter). Next two screw you need to take of are from the view under the light - there is a front fender. You will be ready to take of the front mask with light.
Kodl Kodlyk Thank you. About your tools, what sizes of the wrench are needed for screwing/unscrewing all the bolts in your video ?
Guten morgen weist einer von euch die ein svc 100 ccm hat wie man es etwas schneller und mehr beschleunigung bekommen kann mfg
würde mich auch interessieren