I've been procrastinating my all razer themed built for weeks now.. your video kinda pushed myself to build one right now! *folds sleeves and dust the products for assembly*
After watching this video, the word of the day is 'Easy.' Lol. Great video, as I like your direct approach, excluding unnecessary chatter and explanations about the products; it's a straightforward, EASY-to-follow build. Two thumbs up, man!
Was considering upgrading my mobile setup to a permanent one again, build my own system.. Already using Razer peripherals, this pretty much seals the 'looks' aspect of the price. Thank you! Good luck with the channel mate!
So i guess with the way your set up is, with the cooler being on top you have 2 intake fans, and 2 intake fans on the front, and 1 in the rear, wouldn't it be more efficient to have the bigger cooler in the front and 3 exhaust fans on the top?
This case doesn't have much room to pull in air at the front, so I wanted the fans to push as much as they could through first, instead of trying to push it through the rad. I couldn't imagine much difference the other way, but I prefer my AIOs in the roof
@@jordanash was you able to connect a pwm and the rgb controller at the same time , as I and many other people are having difficulty connecting razer fans to the PWM controller
@@danieljayrogers4087 I didn't use a PWM controller, I used 4 pin splitters onto the motherboard, then as I mentioned some fans were connected to the AIO.
Just asking would the razer Tomahawk mini or the loan li pc-011dx razor, edition, dynamic tempered glass mid tower Work with the same components by any chance?
No, the mini needs an ITX motherboard and SFX PSU if I remember correctly. It's very rare the mini versions of the full size can take the same size parts.
Okay, thanks for that and also I’ve been looking for the parts and that I found an alternative razor tower and it’s the lian li pc-011dx razor, edition, dynamic tempered glass mid tower would it fit perfectly in that Pacific one or do I have to get alternative parts for the build
Hey. Thank you! Unfortunately it's end of life now, so it's very hard to find. I'd recommend looking on ebay, there is an Intel version though so don't get muddled up.
Hi, great presentation there! I would like to ask if the Hanbo Chroma 360mm would fit on the upper side of the Razer Tomahawk, actually it should fit but I’ve seen some online content where it doesn’t fit, it also should fit since it’s an ATX midtower, any thoughts? Actually I’m building my ultimate Razer Desktop setup with all high-end parts and It would be a shame if the 360mm wouldn’t fit on the top part….
@@jordanash would be a banger of a build try to do the fastest am4 build using the taichi razer ed and these rams with a taichi gpu especially a 7900xtx if u could possibly get a hold of one (im doing this exact build but a 5800x3d with 2 modules of 16gb and tightening the timings down
I don't think so unfortunately, ASRock samples are *extremely* hard to get hold of. When I did this it was also at a crossover to AM5, I don't know if another AM4 build would be as popular now AM5 has come down in price.
@@jordanash make it ur personal build as a aesthetic part i hope u still have the x570 taichi razer ed u can reuse the pc case and fans and the PSU just 360mm aio from razer and rams along with taichi gpu if possible
i am ready for my setup now :) thank you again. One more question. Do you recommend Hanbo Fans connecting to Chroma controller or through hanbo usb directly? Thank you
That AsRock Razer Edition X570 is hard to get by.. sold out everywhere. I do see the Z690 at half the price available everywhere.. is there a substantial difference? Would anyone recommend a viable alternative option to the AsRock razer edition?
To be honest the Z670 would be a good move as there are a few generations of CPU to use, where as the X570 you'll be stuck at AM4. Just remember to get an Intel processor over AMD haha
@@jordanash thanks man! Well that’s cool then, don’t mind going with intel in that case… plus it’s half the price! Definitely helps given I purchased all this other expensive Razer stuff for my Razer pc build 😅
@@jordanash One more question: What about the Asrock Razer edition B550? There's a good deal out there for $169 and is compatible with AMD Ryzen 5000 Series / 4000 G-Series / 3000 Series Processors (I now opted for the Ryzen 9 5900X)... any thoughts?
Could do, but you'll be at the limit of upgradability. Although Intel only generally have two/three years of upgrades, it's a much newer platform and you've got lots more options.
How did you get rid of the rainbow lighting effect? What rgb controller do you use? When I turn on my PC firstly the fan has rainbow effect (I think it's a hardware preset). After I enter my password and get into account it syns with synapse and only then changes the lighting effect.
I used the Razer RGB hub. Usually rainbow wave is the default until the software loads in, but you might need to set Synapse to launch at startup, then set the software to remember your password then it'll do it automatically.
Does that mobo sync the rgb ram with synapse 3??? I don’t see anywhere online that says it does. I’m having that same problem with my MSI Bazooka B550 mobo where Mystic Light is found in Synapse but it doesn’t sync the rgb ram. It actually turns off the rgb on the ram (TForce Delta DDR4). 🤦🏿♂️
Hi Jordan, in the end i builth my pc with your guide :) thank you very much! Just 1 question if you had same experience. Hanbo works perfectly but forces me to firmware upgrade and upgrade doesnr work :( have you done firkware upgrade to hanbo wver?
@@jordanash will double check everything tomorrow. Hanbo, Rgb controller and tomahawk detected.perfecrly in synapse. Will try to update all MB and usb drivers. İf still cant will try to make some alternative.commection. thank you for your time
That'll be a setting in your motherboard bios. Some boards still do the lighting effects when the pc us shutdown, guessing the motherboards lighting is still on too?
how would I wire up two 120mm on the psu and 2 140mm at the top? is it possible to pig tail all of them and then put one into the rgb controller? or should i put them separate into the rgb controller. Or plug them into the motherboard? sorry if its a dumb question just not looking to mess anything up@@jordanash
Oh, what orientation are you putting the ones by the PSU in? As if the PSU is fan side up it will need to draw air in, I guess it must be upside down? And some you can, but you can always use a 4-to-1 argb adapter.
@@jordanash I want to make the fans an intake. So I guess it would be PSU fan facing down, then the two fans fans down? That’s sufficient for this case right? Or would an exhaust back, top, bottom, with an intake only in front be pointless?
My general rule of thumb is intake the front, out the rear and top. You can always add intake with the mounts above the PSU, but I don't know if you'll need it, what CPU & GPU combo?
Razer AIO worth the money? In terms of performance. In terms of aesthetic i know it’s a beauty. I’m comparing the with cooler master masterliquid pl360 flux. I’m using Razer Tomahawk razer case as well. #dilemma
Performance is good, but there are better coolers for the price. The new EK ones using the 8th gen Asetek pumps perform a *LOT* better. Like double figures cooler.
Bro I've been searching for this exact video for months now, ever since razer started doing their own components. Thank you!
You're welcome, you're the exact person I was hoping would see it. Please consider subscribing if you liked it.
Absolute legend, I've been searching for an all razer pc for years and i finally found it. Thank You.
You've earnt youself a subscriber
Thank you for watching. You're the exact person I made this video for.
You deserve more than a million subscribers
Thank you so much, support like yours really makes the effort worth it
I've been procrastinating my all razer themed built for weeks now.. your video kinda pushed myself to build one right now! *folds sleeves and dust the products for assembly*
Nice! Enjoy it
After watching this video, the word of the day is 'Easy.' Lol. Great video, as I like your direct approach, excluding unnecessary chatter and explanations about the products; it's a straightforward, EASY-to-follow build. Two thumbs up, man!
Thank you!
love your video it makes me want to build my own Razer Setup :3
Thank you! You should
Was considering upgrading my mobile setup to a permanent one again, build my own system.. Already using Razer peripherals, this pretty much seals the 'looks' aspect of the price. Thank you! Good luck with the channel mate!
Glad it helped. I appreciate it, thank you.
bro what a video really loved it
love from INDIA
hard work ❤❤
Thank you!
Aye! It runs Crysis!
Oh yeah 😎
So i guess with the way your set up is, with the cooler being on top you have 2 intake fans, and 2 intake fans on the front, and 1 in the rear, wouldn't it be more efficient to have the bigger cooler in the front and 3 exhaust fans on the top?
This case doesn't have much room to pull in air at the front, so I wanted the fans to push as much as they could through first, instead of trying to push it through the rad. I couldn't imagine much difference the other way, but I prefer my AIOs in the roof
ah ok, makes sense. What would I put for my PSU? intake or exhaust?@@jordanash
That will either take air from the inside of the case or the bottom depending on which way you put it. They exhaust out the back anyway
Is it compatible with RTX 40 cards?
This was the highest card I had at the time, so I couldn't compare. Have a google :)
@@jordanash thank you
No problem, sorry I couldn't be of more help
I would've went with the Asrock RX6800XT Tai Chi as not only does it match the board but Asrock IS compatible with Chroma.
Razer sent all the parts so I didn't have a say, plus ASRock samples are very hard to get.
Was you able to actually control the fan speeds ??
I let the motherboard and AIO do it with PWM
@@jordanash when you say aio what are you referring to ?
The Razer Hanbo in the PC
@@jordanash was you able to connect a pwm and the rgb controller at the same time , as I and many other people are having difficulty connecting razer fans to the PWM controller
@@danieljayrogers4087 I didn't use a PWM controller, I used 4 pin splitters onto the motherboard, then as I mentioned some fans were connected to the AIO.
Razer knows style. Thata for sure. Maybe not Keyboard switches. But style for days.
They sure do. Haha, oof
Nice build. I have the ITX case that I tried building in once before but that did not go well, about to try again with a new mobo.
Thank you. Good luck!
Very nice build
Thanks!
razer powersupply missing sad
I couldn't get a sample unfortunately
if i buy Razer Hanbo 360. Will it fit easily?
Yep!
Thank you @@jordanash
No problem
i guess we needed a little more thermal paste
Is that a verge reference?
Nice build but we need razer gpu 😎
That would be cool, super expensive though 👀
Epic build !
Thank you!
I just finished my build but it has the Razer Katana and the controller for fans and RGB.
Nice one ☺
@@jordanash I have a video finally
Just asking would the razer Tomahawk mini or the loan li pc-011dx razor, edition, dynamic tempered glass mid tower Work with the same components by any chance?
No, the mini needs an ITX motherboard and SFX PSU if I remember correctly. It's very rare the mini versions of the full size can take the same size parts.
Okay, thanks for that and also I’ve been looking for the parts and that I found an alternative razor tower and it’s the lian li pc-011dx razor, edition, dynamic tempered glass mid tower would it fit perfectly in that Pacific one or do I have to get alternative parts for the build
Yeah that'll be fine, that's an ATX case.
@@jordanash okay thank you for the help
No problem, please subscribe if you liked the video.
Hello. First of all appreciated your work. Can you please share the Razer Motherboard Link from where you buy?
Hey. Thank you! Unfortunately it's end of life now, so it's very hard to find. I'd recommend looking on ebay, there is an Intel version though so don't get muddled up.
Hi, great presentation there! I would like to ask if the Hanbo Chroma 360mm would fit on the upper side of the Razer Tomahawk, actually it should fit but I’ve seen some online content where it doesn’t fit, it also should fit since it’s an ATX midtower, any thoughts? Actually I’m building my ultimate Razer Desktop setup with all high-end parts and It would be a shame if the 360mm wouldn’t fit on the top part….
Hey, thank you. Your answer is in the video, I cover it at 6:17...
Awesome build 👍
Thank you!
overclock the 5950x get a 360mm hanbo and g skill 3600mhz cl14 14 14 34 (GTZRA on the end of the product name)
Yeah sound good. I only had a 240mm sample sent though, so I was a little limited on options there.
@@jordanash would be a banger of a build try to do the fastest am4 build using the taichi razer ed and these rams with a taichi gpu especially a 7900xtx if u could possibly get a hold of one (im doing this exact build but a 5800x3d with 2 modules of 16gb and tightening the timings down
I don't think so unfortunately, ASRock samples are *extremely* hard to get hold of. When I did this it was also at a crossover to AM5, I don't know if another AM4 build would be as popular now AM5 has come down in price.
@@jordanash make it ur personal build as a aesthetic part i hope u still have the x570 taichi razer ed u can reuse the pc case and fans and the PSU just 360mm aio from razer and rams along with taichi gpu if possible
That's about £1400 of parts with money I don't have unfortunately 😂
Is the rectangular bracket for cooling is included in ryzen motherboard?
Motherboards come with the backplate installed, but the cooler (if it supports it) will come with the bracket to fit to it.
WOW you look like Adam Sandler! 😮
Do I? 😂
great video you have inspired me to build one also, why didnt you go with the chroma 340mm does it fit in the atk tower? or does the 240mm fit better
Thanks. That was just the cooler I went sent, I didn't get a say on what size. I would have picked the 360 myself.
@@jordanash ok but the 360 would fit ? Would the 850 power supply work good with the 360 or bump it up to 1200 v
Yeah, in the roof too. 850 is fine for the same parts I use here.
@@jordanash thanks so much .
No problem
oh yeaaaah the taichi board. Some tech youtubers built "all razer" and still missed the motherboard LMAO
Haha, to be fair they are expensive, plus EOL now too
@Jordan Ash are you using the tomahawk mini itx or the tomahawk ATX MidTower
In the video - 6:04
Thank you, I guess i missed that part
☺
i am ready for my setup now :) thank you again. One more question. Do you recommend Hanbo Fans connecting to Chroma controller or through hanbo usb directly? Thank you
No problem, I don't think it matters really, I just used the hub as I didn't have enough headers.
@@jordanash Thank you so hoth option is okey. thank you for the prompt answer
Yes either works well.
That AsRock Razer Edition X570 is hard to get by.. sold out everywhere. I do see the Z690 at half the price available everywhere.. is there a substantial difference? Would anyone recommend a viable alternative option to the AsRock razer edition?
To be honest the Z670 would be a good move as there are a few generations of CPU to use, where as the X570 you'll be stuck at AM4. Just remember to get an Intel processor over AMD haha
@@jordanash thanks man! Well that’s cool then, don’t mind going with intel in that case… plus it’s half the price! Definitely helps given I purchased all this other expensive Razer stuff for my Razer pc build 😅
No worries. Oh blimey yeah, if you're that deep into it you'll want something that matches.
@@jordanash One more question: What about the Asrock Razer edition B550? There's a good deal out there for $169 and is compatible with AMD Ryzen 5000 Series / 4000 G-Series / 3000 Series Processors (I now opted for the Ryzen 9 5900X)... any thoughts?
Could do, but you'll be at the limit of upgradability. Although Intel only generally have two/three years of upgrades, it's a much newer platform and you've got lots more options.
Nice job.
Thank you
How did you get rid of the rainbow lighting effect? What rgb controller do you use?
When I turn on my PC firstly the fan has rainbow effect (I think it's a hardware preset).
After I enter my password and get into account it syns with synapse and only then changes the lighting effect.
I used the Razer RGB hub. Usually rainbow wave is the default until the software loads in, but you might need to set Synapse to launch at startup, then set the software to remember your password then it'll do it automatically.
Does that mobo sync the rgb ram with synapse 3??? I don’t see anywhere online that says it does. I’m having that same problem with my MSI Bazooka B550 mobo where Mystic Light is found in Synapse but it doesn’t sync the rgb ram. It actually turns off the rgb on the ram (TForce Delta DDR4). 🤦🏿♂️
IIRC I used the Asrock software for the RAM. *Or* the default lighting was rainbow wave anyway
Hey bro. I buy the amd ryzen 5900x it will fit in the mother board
Hey, for the X570 board yeah.
@@jordanash thanks bro.
No worries
Need a airflow version
True, would the full review I mentioned be something you'd like to see?
@@jordanash yes
Cool
Hi Jordan, in the end i builth my pc with your guide :) thank you very much! Just 1 question if you had same experience. Hanbo works perfectly but forces me to firmware upgrade and upgrade doesnr work :( have you done firkware upgrade to hanbo wver?
Hey, you're welcome! I'd try plugging it into a different USB headset if you have one, sometimes AIOs like that are fussy with ports.
@@jordanash Tried different USB header and safe mode already. Will ask razer suppport but dont think they will help. Anyway thanks for the guide :)
Have you got the motherboard and USB drivers?
@@jordanash will double check everything tomorrow. Hanbo, Rgb controller and tomahawk detected.perfecrly in synapse. Will try to update all MB and usb drivers. İf still cant will try to make some alternative.commection. thank you for your time
That's very odd, good luck! No problem
What Intel processor would you recommend for the razer edition z690?
Loved your build so much I plan on doing the same one
Glad to hear it. I'd go for the 13700K if you can flash the bios, it's a big step up from the 12700K.
sorry, but cable management is veeery bad
I didn't leave it like that, I did it off camera 😂
Dream build
How did you make the razer logo light up because mine doesn’t work for some reason
Have you got the sata power connected? Sometimes if the front plastic panel isn't on properly it won't illuminate either.
@@jordanashI got it to turn on but when I turn off my pc it’s still lights up how do I turn it off
That'll be a setting in your motherboard bios. Some boards still do the lighting effects when the pc us shutdown, guessing the motherboards lighting is still on too?
@@jordanash no that’s off it’s just the razer logo and can you tell me what to disable so the light can turn off
@@jordanash never mind I got it to turn off thx for the help tho
Man I’m trying to put two Razer 120mm fans on the bottom and the holes aren’t even big enough for the screws that came with the fan. Any advice here?
Hmmm, that's odd. I'll look at mine and let you know
how would I wire up two 120mm on the psu and 2 140mm at the top? is it possible to pig tail all of them and then put one into the rgb controller? or should i put them separate into the rgb controller. Or plug them into the motherboard? sorry if its a dumb question just not looking to mess anything up@@jordanash
Oh, what orientation are you putting the ones by the PSU in? As if the PSU is fan side up it will need to draw air in, I guess it must be upside down? And some you can, but you can always use a 4-to-1 argb adapter.
@@jordanash I want to make the fans an intake. So I guess it would be PSU fan facing down, then the two fans fans down? That’s sufficient for this case right? Or would an exhaust back, top, bottom, with an intake only in front be pointless?
My general rule of thumb is intake the front, out the rear and top. You can always add intake with the mounts above the PSU, but I don't know if you'll need it, what CPU & GPU combo?
Razer AIO worth the money? In terms of performance. In terms of aesthetic i know it’s a beauty. I’m comparing the with cooler master masterliquid pl360 flux. I’m using Razer Tomahawk razer case as well. #dilemma
Performance is good, but there are better coolers for the price. The new EK ones using the 8th gen Asetek pumps perform a *LOT* better. Like double figures cooler.
@@jordanash Also i notice you’re using Razer Hanbo 240mm instead of 360mm. The 360mm does not fit in Razer Tomahawk Chasis?
It does, I just didn't have the 360. Only 240 versions were sampled.
Sooooo cooool
Thank you :)
beauty