I just ordered some for my 2016 heritage softail. I’m not worried about any big HP gains I just want it to sound better. I was told I won’t need a tune for that. I’m also keeping the stock 103 high output air breather with KN filter. But I’m still concerned about need for tuning. Bike has more than enough power for me I’m just looking for sound. But I also want it to continue to run well.
Silly question.......fitting my big radius to my 2022 streetbob 114 tomorrow where do I get my torque settings from? (Said it was a silly question 😁😁😁😁😁😁😁😁😁😁😁😁😁)
I bought an 07 Softail Standard. It had the Big Radius installed. Instead of plugging the O2 sensors back in they installed some diodes. I did not find a tuner anywhere on the bike. Would it be better to leave the diodes or remove them and plug the O2 sensors back in?
Installed the big radius pipes on my '15 fatboy lo. Removed the baffles in the pipes. Installed the stock o2 sensors. Engine fired up nicely, but when I rode down the road about 1/2 a mile, engine died, and could not restart. Would turn over, but would not fire. ????
I'm installing these on a 2020 Road Glide special and am having issues. I removed the two 1/2" transmission bolts but now I can't tighten the rearmost transmission hex bolt because of the angle of the mounting bracket. Maybe with a 1/2" swivel to a 1/4" drive but I couldn't find a 1/2" socket to 1/4" drive. But even then the specs indicate to torque to 13-16 lbs. There's just not enough space to use a torque wrench. Is it necessary to tighten the transmission hex bolts to specific torque? If not I still have the problem of not enough space to tighten that one bolt. Also the instructions indicate to use the provided hex bolt and 5/16" washer, but the instructions indicate that two 5/16" washers are included in the bag. I found 4 identical washers that seem overly large. Do I use these and if so they can only go behind the bracket between the transmission bolt hole and the bracket.
You cant tighten it because of a space issue? If that's the case use a wrench and blue threadlocker on the bolts and snug them up. As for the washers they wont fit on the bolts? I don't believe they are designed to go behind the bracket
@@blakebrown1577 Not nearly as loud as the coming solar nova that Jehovah uses to sanitize the earth necessitating a "re-creation" (Matt 19: 28) as this will be an 'extinction level event'. 2 Peter 3: 10 "But Jehovah’s day will come as a thief, in which the heavens will pass away with a roar, but the elements being intensely hot will be dissolved, and earth and the works in it will be exposed. 11 Since all these things are to be dissolved in this way, consider what sort of people you ought to be in holy acts of conduct and deeds of godly devotion, 12 as you await and keep close in mind the presence of the day of Jehovah, through which the heavens will be destroyed in flames and the elements will melt in the intense heat! 13 But there are new heavens and a new earth that we are awaiting according to his promise, and in these righteousness is to dwell." Only a Great Crowd who are clean in Jehovah's eyes will survive this. Suspicious Observers channel addresses the science behind the nova.
@@jpcycles according to the " fitment " under product detail, the lists of HD sportsters did not include 2010 sportster iron XL883N......it shows year 2014 - 2020..
@@jpcycles my concern is i really love the big radius design and sound, but i need to assure that it could fit perfectly onto 2010 harley sportster year 2010 model XL883N.
See more at Countersteer. www.jpcycles.com/countersteer?How_to_Install_Vance_and_Hines_Big_Radius_2_into_2&VcTouG3CNc
I like how you guys are putting the tools you need now. Awesome job, keep up the great work.
I just ordered some for my 2016 heritage softail. I’m not worried about any big HP gains I just want it to sound better. I was told I won’t need a tune for that. I’m also keeping the stock 103 high output air breather with KN filter. But I’m still concerned about need for tuning. Bike has more than enough power for me I’m just looking for sound. But I also want it to continue to run well.
I love how 6 years later this channel still hasn’t answered a single question in the comments. 😂
Wouldn't those new pipes need some kind of extra bracket to be installed?
If so, why doesn't the video show how/where to install the new bracket?
Silly question.......fitting my big radius to my 2022 streetbob 114 tomorrow where do I get my torque settings from? (Said it was a silly question 😁😁😁😁😁😁😁😁😁😁😁😁😁)
What torgue spec did u use to tighten the flange nuts?
Did you have to put forward controls on due to the exhaust upgrade or will the exhaust still fit with mid controls?
Wouldn’t you have to install a fuel pack tune after exhaust mode?
I would really appreciate it if someone explained little better "mount bracket" installation!
I have a 2016 breakout. I would like to put those pipes on. Do I need to have the bike tuned....
I bought an 07 Softail Standard. It had the Big Radius installed. Instead of plugging the O2 sensors back in they installed some diodes. I did not find a tuner anywhere on the bike. Would it be better to leave the diodes or remove them and plug the O2 sensors back in?
Fixing to put kind of same ones but blacks
So there’s no tuner or fuel pack needed after the install?
I would recommend doing the FP3...I cant's exactly say you NEED it but its highly recommended.
ruclips.net/video/t_o0e8Mce8o/видео.html
-Patrick
Were can i get a Exuast mount like that i got a 07 dyna lowrider and the one that come with it doesnt fit.
Can we keep the warranty while we put the v&h big radius?
If putting these pipes on a 88 twin what slow jet do you recommend. I also would add the Arlen Ness big sucker stage one.
Do you got a video of how to put these kind of pipes on a 2008 street glide I cant find a video anywhere
Installed the big radius pipes on my '15 fatboy lo. Removed the baffles in the pipes. Installed the stock o2 sensors. Engine fired up nicely, but when I rode down the road about 1/2 a mile, engine died, and could not restart. Would turn over, but would not fire. ????
Start by checking the plugs. Generally not recommended to remove the baffle, it has a negative effect on performance.
Same pipes on new m8 soft tails would it be the same procedure or slightly different?
Same basic procedure but slightly different. mounting bracket in the rear will be different for sure.
They actually look nice without the heatshield ...
How do you tune for new exhaust
I'm installing these on a 2020 Road Glide special and am having issues. I removed the two 1/2" transmission bolts but now I can't tighten the rearmost transmission hex bolt because of the angle of the mounting bracket. Maybe with a 1/2" swivel to a 1/4" drive but I couldn't find a 1/2" socket to 1/4" drive. But even then the specs indicate to torque to 13-16 lbs. There's just not enough space to use a torque wrench. Is it necessary to tighten the transmission hex bolts to specific torque? If not I still have the problem of not enough space to tighten that one bolt. Also the instructions indicate to use the provided hex bolt and 5/16" washer, but the instructions indicate that two 5/16" washers are included in the bag. I found 4 identical washers that seem overly large. Do I use these and if so they can only go behind the bracket between the transmission bolt hole and the bracket.
You cant tighten it because of a space issue? If that's the case use a wrench and blue threadlocker on the bolts and snug them up. As for the washers they wont fit on the bolts? I don't believe they are designed to go behind the bracket
@@jpcycles I appreciate your quick reply. I worked it out. Thanks.
Love that sound ! Are they legal ?
Do you need 2 dog bones for both pipes mine came with only 1 ??
yes, you need one for each pipe
Having trouble fitting the headers and flanges on flush to the motor on my 2010 wide glide replaced the header gaskets but flanges just wont sit flush
Same happening to me right now.. you figure it out??
👍👍
Are these quite loud? I've got an 06 Shadow that i'd like to put quieter pipes on.
Yeah, probably louder than what you want.
Yes and the sounds bounces right back off the pavement when you are at a stoplight.
Very loud
@@blakebrown1577
Not nearly as loud as the coming solar nova that Jehovah uses to sanitize the earth necessitating a "re-creation" (Matt 19: 28) as this will be an 'extinction level event'.
2 Peter 3: 10 "But Jehovah’s day will come as a thief, in which the heavens will pass away with a roar, but the elements being intensely hot will be dissolved, and earth and the works in it will be exposed.
11 Since all these things are to be dissolved in this way, consider what sort of people you ought to be in holy acts of conduct and deeds of godly devotion, 12 as you await and keep close in mind the presence of the day of Jehovah, through which the heavens will be destroyed in flames and the elements will melt in the intense heat! 13 But there are new heavens and a new earth that we are awaiting according to his promise, and in these righteousness is to dwell."
Only a Great Crowd who are clean in Jehovah's eyes will survive this. Suspicious Observers channel addresses the science behind the nova.
they do make quiet baffles
How much power do you loose with these on a carbed bike 01 road king
You wouldn't lose any. You would gain.
Is this exhausts able to fit onto my 2010 sportster iron?
This is the one for your bike www.jpcycles.com/product/161-855/vance-hines-big-radius-2-into-2-black-exhaust
@@jpcycles according to the " fitment " under product detail, the lists of HD sportsters did not include 2010 sportster iron XL883N......it shows year 2014 - 2020..
@@jpcycles my concern is i really love the big radius design and sound, but i need to assure that it could fit perfectly onto 2010 harley sportster year 2010 model XL883N.
My upper heat shield loose. How to remedy the situation? Thanks
Tighten the heat shield clamps with a flathead screwdriver.