Old video - Old laptop - and I was given an old Toshiba with no video - Heated the video processor from the back just as our teacher Sorin did here and bingo - Video is now working - I did have to heat it 2 times. The first time I guess not enough heat. So our teacher indicated pay attention to the heat and heat sink and feel the heat - 2nd time was a charm. I learn something everytime I watch any of your videos and you are a fantastic resource and selfless steward and generous kind individual for sharing your knowledge - thank you again Sir Sorin! Kudos!
I would have liked to watch you do the whole job. You may think it is boring but I think many people could learn tips, tricks, more by watching even routine stuff. If it is boring, the viewer can always skip over parts of the video.
I actually watched the entire video, I was very surprised to see what the problem was, I am running with the same problem now and thanks to you I know what not to mess with, I agree with the other viewers you should do the entire video about how to fix it. Thank you and I hope you make more videos. Stay healthy and smart. Peace
Nice intermediate tutorial, not for sissies. You did BGA with power on, this tells that you are no novice tech. Thanks, vaio also has this issue, and you are right, AMD = graphic card overheat. Thanks Sir, I have a vaio which has intermittent display when powering, I also suspect the graphic card balls came loose. have to reflux or find another gpu chip from scraps. Subscribing and following.
This malfunction is actually cause by a defect from the factory and will take time before they are actually noticed. To fix it you need to reflow both north and south bridge on both sides of the board. To fix the heating issue you need to take off the cooling vent and blow some air from a can of compressed air and apply new themal paste as the compound would have dried out cause poor thermal distribution to the cool fan.
Hi,Toshiba satellite C650 Model Laptop - Display goes off after 4-5 minutes of working. Fan is clean. Heat sink normal heat. Cleaned CPU and GPU and applied new thermal paste. Works for sometime, but again display gets off. Power LED and charging LED still glows. But No display. Could you please advice what could be the issue.
Does your laptop run and your laptop randomly goes off or does the laptop entirely turn off ? Have you experienced any white screens in the past with your model ? How long have you had it for ?
@@joshchelvolski1033 Hi, I cleaned and re apply thermal paste. It worked and display got on. Only motherboard and Fan connected, display was ok. But while I connected the Hard Disk, then No display !!
@@mathucn1552 Did you check if your ram cards are properly seated ? They could sometimes move out of place over time. A hard drive wont be able to prevent a computer from booting up, even though if the hard drive was faulty the computer would tell you on screen or it will tell you in a series of beeps.
I think this is the same case which is i also face ,but my laptop is toshiba satellite L55-b5267 i'm using it only by charger not battery there is is light when i plug there is power but noting on the display and also if if it help there is no power transfer to the fan which doesn't spin also,....thank you for all kind of your support
how to know where to check the voltage using a multimeter? I'm new with these things I am just wondering where should I fin the points where to test the voltage, thank you..
I have an Asus Aspire motherboard. It has the AMD Vision graphics and I have the same problem. It powers on but screen does not turn on. The heatsink has some corrosion on it. Bad heatsink made the graphics chip fail. Thanks Sorin for advice!
Good day. I have a HP 630 the fan spins for about a minute and goes off. No display. When I touch (press a little) on the power connector then the fan spins very fast but still no display. What could the issue be? I have been watching probably all your videos I have learnt alot. But this is a serious head scratcher. No components are getting hot. No caps lights are blinking. Ram I changed and cleaned. CMOS battery is fine. I am watching this video regardinf the graphics chip.
You're the best repair tech guy on here and there's no one can compare to you. Btw, what's the name of your other shop? I'd like to watch both of your shop on RUclips. I wish you located in US 🇺🇸. If i sign up with the best plan you have for $15/month, do i see your trick and tips videos? Your quick responding is appreciated.
A beginner - I went through all your lesson. My laptop Toshiba satellite L740D wont turn on after hibernation. I did everything but only the light turned on.
Dear Sir. I would like to thank you for your help in repairing Laptops and sharing your knowledge with us. my problem started when I interchanged two HDs one from Toshiba Tecra R940 with another from Compaq Presario C700. First both laptops worked fine for a couple of days . Then ,both stopped together. When powering ON ,the LED and sometimes fans turned ON and the LED stayed ON but nothing is displayed on the screens. I tried several times to get them on again but nothing changed. I am asking your help.
Hi Sorin! Nice to see you back! As always, we're still learning some new tricks from our Guru. I've just wanted to know your thoughts regarding Discreet to UMA conversion on some laptops that has 2 graphic chips, do you have some experience on doing this? Thanks in advanced for your reply.
sir my toshiba satellite c640 laptop is not turning on but the led lights are blinking what is solution and what are the major reasons for this problem. hope you read my message and give solution for my problem
Good evening. You are very effective (and impressive, let me say!), truely a 'guru'. May i ask what symptom should one expect if there were a short circuit in the regulator feeding the graphic chip? I guess that no image will be present on the screen...
Hello. I just tried to clean my laptop fan because of some cockroach getting inside and some dust. I don't have experience on that. After that it shows power (when it is on) and charging lights (when it is plugged) but noting is shown on the screen. The fan is also working. Thank you in advance.
So what did u do for the overheating? Mine worked fine 30 mins ago, went to sleep and when i tried to turn it back on it wont boot. Sounds like the fan is on but its getting very hot and I cant get it to turn off either.
Hi Sorin, is it better to solder the pins from underneath like you do in this video or from the other side (like on top of the chip) Why is it better this or that way? Best regards
Dear sir, I like your video, may i ask you for my problem when bought motherboard Toshiba l 645. When i tested with Ram 2 Gb and cpu i3 370m without hdd. it has display, can into Bios use internal keyboard, But no function at 3 slot usb2.0. When plug in keyboard and mouse, no leds are on when push numlock and caplock, fan run very fast, no stop blowing and board quite hot. So can you tell me what is broken at this motherboard. Waiting your information bcs i know you are the best technician. Thank you
Nice video Sorin(sint un ex Clujean, acum sint in LA), I have an Asus Q502LA which starts, power on/CAPS/Charging LED is on, fan spins fast and slow a couple of times, than settles at fast RPM. No display, no HDD activity. It seems like all the voltages are present. Made a hard reset, still nothing. Any help, would be very appreciated. Tibor
Hi, I have a Toshiba C55 It has a short with the Screen with one of the cables, I replace the screen cable but now it does not Star now. Power Botton its ok has 3.3V, When I press it the fan its dead and nothing on the screen.
thank you for all of your great videos!! i want a guidance.. i have a sony vaio vpcea3l1e and it has black screen. HDMI gives no picture but vga works with no problem. i tried swaping or installing each dimm individual with no result. Please give me some advices how to troubleshoot. Thank you
Toshiba Satelite p500 no image on screen, but on hdmi all ok, no problems with working. When lap top goes to sleep and wake up,e terbal monitor on hdmi disconnected, lid closed and reopened internal monitor is recognised and working, what could be a problem
In a case of corrupted bios i dont know if this wincris with Fn+B could restore functionality or in general it is another piece of useless crap and need an eeprom programmer.
Hello. I have an asus tuf gaming. With an intel graphics card and a rtx 2060. It is a gaming laptop pc. I was playing one day and had a kind of glitch on the screen. I forced the pc to stop. And by turning it back on, everything worked except the screen which remained completely black. The fans are running. But the keyboard shows a red light. I have tried all the methods of removing the ram sticks, press the ignition button after disconnecting the battery. Nothing works. I know that with an external keyboard and perhaps specified manipulations, one can find a solution. Help me please.
Dear Sir Your videos are very perfect and clearly. I want to ask you abt laptop Toshiba L855. I have bought that motherboard chipset intel Hm7670 Gpu Hd4000. When i tested with cpu i5 2450m ( from my old motherboard L850) only adapter led and power on led are on, the fan no blowing, blank screen. This case same like when i tested with my old motherboard L850. I want to ask you this problem is broken motherboard or my old cpu i5 is broken or cpu i5 is not support to motherboard which must use cpu I5 Gen.3. Fyi: i haxe check my old motherboard chipset SLJ8E, the label put near Ram are same with new motherboard L855, also seller said my old cpu is not support, must use i5 Gen.3. So i want to make sure it the broken motherboard or cpu i5 is not support to motherboard. Pls be inform soon. Thank you.
So what exactly was the problem? I have a toshiba satellite l850d-12q where the screen intermittently works fine and other times it's like the back light isn't working and you can just about make out things on the screen and eventually see the desktop when it's booted up. Any ideas what that might be? Any help would be much appreciated.
Hello,i have a toshiba A200 which starts with pushbutton and also can stop with it but have no screen,no beep,no hdd activity and only the fan spins from time to time and this could last to eternity.It does exactly the same even cpu,graphics board or both are removed.I have tried wincrisis usb but nothing except fan spinning to max speed.All the voltages look correct and the worst of all is that bios is a parallel flash 40 pins ic and has no TOKIN caps at all for replace.Any ideas please?
I have Asus X540s 2 examples and one of them does power on, boot to windows but there is no display on the screen at all. I swapped the motherboards to see if it was a monitor but it was the same scenario with no display on the screen. I tried some reset tricks like holding the power switch or removing battery etc. but It didn't help. I also tried windows key and +B but still nothing. I have a question on what to check on motherboard first to find any possible shorts. All ram is soldered into motherboard. I checked components around monitor connector -3.65V but it seems like they are fine. Any advices on what to check next?
I have problem with my toshiba satellite laptop if i install the 2nd ram in the 2nd slot the screen become black no display,but if only one ram stick 1 install in the 1st slot it works.what is the possible problem of this?
I had a black screen on Toshiba Satellite C650. It had two RAM sticks in. Saw your post (am replying to it) removed second RAM stick and it booted. Problem: Faulty RAM stick. Thanks
You need to find plus with multimeter which is 3.3v i think . Put black probe of the multimeter on copper circle anywhere on board and try pins with red one by one ! You should find 3.3v . I think laptop then should power up . Or you can use lat screwdriver to short that pin ,which is in most cases second one or one before the last pin, with first or last, in case where the plus is . You need to have power with charger or battery when finding plus on power pins . But DON'T FORGET TO PUT BLACK PROBE IN COPPER CIRCLE AND FIRST FIND PLUS PIN ! Hope I helped you . :)
I have a Toshiba Laptop which is taking time to switch on, and it has too much wave sound when I switch on, and when I try to watch a movie on that it doesn't bring the movie a HD processor. So what can I do Please
Hello Sir, I am having a problem and hope that you could help me out please I have an Asus rog gl752vw Laptop When plugged in with charger the charger light is on, then when I press the power button the led turns on then immediately turns off with no display. I tried removing the ram and got no beeps, I reset the CMOS battery and still no luck I made sure the charger was giving proper voltages and it was and I checked all the USBs, when I do charge the laptop the touchpad gets a bit warm and thats it. Please can you help me out :)
i had some overheating issues with the same pc. i took it apart and cleaded it out. applied fresh artic silver to the heat sinks and cant get video now. is it possible i damaged the video chip?
There no damage from the graphics chip but from what i heard is the pins on the one of the north or south bridge is not properly soldered so over time they come loose and u would need to reflow them to fix it.
@@joshchelvolski1033 Just chiming in for anyone else who might stumble upon this. The graphics chip or APU is soldered using zero lead solder which is prone to cracking. In order for a permanent fix the graphics chip would need to be reballed and soldered again not something that can be done without the right tools and equipment. What Sorin basically did is get the solder to move around and create a connection but again after some time it will fail again until it is reballed professionally in this case its not cost effective.
Hi, i have the same issue. However , my fan does run with power on, but nothing is on screen. Please advise... btw, what's that square piece with gray space color on the motherboard to help the screen turning on? Please share the name of that piece. Thank you much in advance
Old video - Old laptop - and I was given an old Toshiba with no video - Heated the video processor from the back just as our teacher Sorin did here and bingo - Video is now working - I did have to heat it 2 times. The first time I guess not enough heat. So our teacher indicated pay attention to the heat and heat sink and feel the heat - 2nd time was a charm. I learn something everytime I watch any of your videos and you are a fantastic resource and selfless steward and generous kind individual for sharing your knowledge - thank you again Sir Sorin! Kudos!
I would have liked to watch you do the whole job. You may think it is boring but I think many people could learn tips, tricks, more by watching even routine stuff. If it is boring, the viewer can always skip over parts of the video.
I actually watched the entire video, I was very surprised to see what the problem was, I am running with the same problem now and thanks to you I know what not to mess with, I agree with the other viewers you should do the entire video about how to fix it.
Thank you and I hope you make more videos.
Stay healthy and smart.
Peace
Hey, I am from India...thank you very much for your tip. I have tried and fix it. God bless you😇
Very impressive teaching how to fix laptop. Thank sir
Nice intermediate tutorial, not for sissies. You did BGA with power on, this tells that you are no novice tech. Thanks, vaio also has this issue, and you are right, AMD = graphic card overheat. Thanks Sir, I have a vaio which has intermittent display when powering, I also suspect the graphic card balls came loose. have to reflux or find another gpu chip from scraps. Subscribing and following.
Great video I have 2 Toshiba old L300 with same problem, turns on but no display, so it the graphics chip.
This malfunction is actually cause by a defect from the factory and will take time before they are actually noticed. To fix it you need to reflow both north and south bridge on both sides of the board. To fix the heating issue you need to take off the cooling vent and blow some air from a can of compressed air and apply new themal paste as the compound would have dried out cause poor thermal distribution to the cool fan.
Hi,Toshiba satellite C650 Model Laptop - Display goes off after 4-5 minutes of working.
Fan is clean. Heat sink normal heat. Cleaned CPU and GPU and applied new thermal paste. Works for sometime, but again display gets off. Power LED and charging LED still glows. But No display.
Could you please advice what could be the issue.
Does your laptop run and your laptop randomly goes off or does the laptop entirely turn off ? Have you experienced any white screens in the past with your model ? How long have you had it for ?
@@joshchelvolski1033 Hi, I cleaned and re apply thermal paste. It worked and display got on. Only motherboard and Fan connected, display was ok. But while I connected the Hard Disk, then No display !!
@@mathucn1552 Did you check if your ram cards are properly seated ?
They could sometimes move out of place over time.
A hard drive wont be able to prevent a computer from booting up, even though if the hard drive was faulty the computer would tell you on screen or it will tell you in a series of beeps.
@@joshchelvolski1033 Yes, Good Point. I will Re fix again and feedback. Thanks a lot for your prompt responses..Its really supporting ..
I think this is the same case which is i also face ,but my laptop is toshiba satellite L55-b5267 i'm using it only by charger not battery there is is light when i plug there is power but noting on the display and also if if it help there is no power transfer to the fan which doesn't spin also,....thank you for all kind of your support
At last am in the discord , it's amazing I love it thanks for point out about it
i live in u.s.a. Baltimore, thanks for taking me under your wing.
Thanks! It was the graphics indeed
Yes ,another perfect ,intime solution
how to know where to check the voltage using a multimeter? I'm new with these things I am just wondering where should I fin the points where to test the voltage, thank you..
If you can get the schematics of your laptop study them, over there there are voltage and what are the components behind the numbers printed on pcb.
i have this problem
what a machine you put in graphic card??
what the hell did u do to fix it
I have an Asus Aspire motherboard. It has the AMD Vision graphics and I have the same problem. It powers on but screen does not turn on. The heatsink has some corrosion on it. Bad heatsink made the graphics chip fail. Thanks Sorin for advice!
Good day. I have a HP 630 the fan spins for about a minute and goes off. No display. When I touch (press a little) on the power connector then the fan spins very fast but still no display. What could the issue be? I have been watching probably all your videos I have learnt alot. But this is a serious head scratcher. No components are getting hot. No caps lights are blinking. Ram I changed and cleaned. CMOS battery is fine. I am watching this video regardinf the graphics chip.
You're the best repair tech guy on here and there's no one can compare to you. Btw, what's the name of your other shop? I'd like to watch both of your shop on RUclips. I wish you located in US 🇺🇸. If i sign up with the best plan you have for $15/month, do i see your trick and tips videos? Your quick responding is appreciated.
thank you very much, sir
A beginner -
I went through all your lesson. My laptop Toshiba satellite L740D wont turn on after hibernation. I did everything but only the light turned on.
You have a very pleasant way of teaching. Very !
Dear Sir.
I would like to thank you for your help in repairing Laptops and sharing your knowledge with us. my problem started when I interchanged two HDs one from Toshiba Tecra R940 with another from Compaq Presario C700.
First both laptops worked fine for a couple of days . Then ,both stopped together.
When powering ON ,the LED and sometimes fans turned ON and the LED stayed ON but nothing is displayed on the screens. I tried several times to get them on again but nothing changed. I am asking your help.
Thankx for sharing i find the problem with the second Ram slot
Hi Sorin! Nice to see you back! As always, we're still learning some new tricks from our Guru. I've just wanted to know your thoughts regarding Discreet to UMA conversion on some laptops that has 2 graphic chips, do you have some experience on doing this? Thanks in advanced for your reply.
sir my toshiba satellite c640 laptop is not turning on but the led lights are blinking what is solution and what are the major reasons for this problem.
hope you read my message and give solution for my problem
good to see you , i love to watch you fixing
I also have same problem with my Toshiba laptop but when turned On the LED panel is getting lit but nothing on display.
Another perfect diagnosis and fast repair , excellent
what software did you use to show your volt readings on your monitor, and what kind of leads did you use?
Nice tutorial btw..
Good evening. You are very effective (and impressive, let me say!), truely a 'guru'. May i ask what symptom should one expect if there were a short circuit in the regulator feeding the graphic chip? I guess that no image will be present on the screen...
Your the man🙏
Thank you for this video coz was wondering if l have to reset cmos battery and unfortunately it has none Toshiba L50
Hello. I just tried to clean my laptop fan because of some cockroach getting inside and some dust. I don't have experience on that. After that it shows power (when it is on) and charging lights (when it is plugged) but noting is shown on the screen. The fan is also working. Thank you in advance.
Hello dear Blaz Koritnik, if your case is the same with me, you should check that the RAM is fixed to the slot properly. Kind regards.
Our friend the RS880M this time? Harder to resurrect than the G84 indeed. Won't last long either.
What did you do ? You just clean the graphic ?
Any alternate if you dont have the industrial heat gun?
So what did u do for the overheating? Mine worked fine 30 mins ago, went to sleep and when i tried to turn it back on it wont boot. Sounds like the fan is on but its getting very hot and I cant get it to turn off either.
You might want to remove the power adapter before taking a laptop apart.
thanks for another great video
Nice, thanks..!
Simple demonstration with direct result.
I have a dead Clevo w370ss, similar symptom, maybe i could give it some extra mile.
Good video
Hi,Can you tell me the ideal temperature with the heat gun? best regards.
250°C. I fixed my laptop with it. But it is only temporary solution. If you still want your laptop you'll need to send it to reballing...
Hi Sorin, is it better to solder the pins from underneath like you do in this video or from the other side (like on top of the chip) Why is it better this or that way? Best regards
You should of connected it to a external monitor first to see if its a lcd problem.
Dear sir,
I like your video, may i ask you for my problem when bought motherboard Toshiba l 645. When i tested with Ram 2 Gb and cpu i3 370m without hdd. it has display, can into Bios use internal keyboard, But no function at 3 slot usb2.0. When plug in keyboard and mouse, no leds are on when push numlock and caplock, fan run very fast, no stop blowing and board quite hot. So can you tell me what is broken at this motherboard. Waiting your information bcs i know you are the best technician. Thank you
Nice video Sorin(sint un ex Clujean, acum sint in LA), I have an Asus Q502LA which starts, power on/CAPS/Charging LED is on, fan spins fast and slow a couple of times, than settles at fast RPM. No display, no HDD activity. It seems like all the voltages are present. Made a hard reset, still nothing. Any help, would be very appreciated. Tibor
Hi, I have a Toshiba C55 It has a short with the Screen with one of the cables, I replace the screen cable but now it does not Star now. Power Botton its ok has 3.3V, When I press it the fan its dead and nothing on the screen.
I tried it, it works! but very temporary! it works now, later again it wont
thank you for all of your great videos!! i want a guidance.. i have a sony vaio vpcea3l1e and it has black screen. HDMI gives no picture but vga works with no problem. i tried swaping or installing each dimm individual with no result. Please give me some advices how to troubleshoot. Thank you
Got a similar problem like this with my Lenovo, just the power light is on and nothing else don't even see the fan spinning. PLEASE HELP!!!
how to reset bios with shortcuting method for that laptop? I tried to install proxmox but proxmox changed bios and later no screen
Mine got dark screen of dim light and wont boot , my charger got problem it's 7v , I replaced it still the same
Hello, how did you found power on pins? Thanks all
Good afternoon. My Toshiba is beeping three and no lights on the screen
you are Great
Toshiba Satelite p500 no image on screen, but on hdmi all ok, no problems with working. When lap top goes to sleep and wake up,e terbal monitor on hdmi disconnected, lid closed and reopened internal monitor is recognised and working, what could be a problem
New Subscriber here ! :D
sir may i ask what kind of tool you used in your video to fix the graphics?
Its a hot air solder
I have this issue but it can display on an external monitor. That means its not a graphics card issue, correct?
Thank u sir👍🙋
i am curious to see a repairing at the bios chip, when show black screen because a bios chip failing:d ur good
In a case of corrupted bios i dont know if this wincris with Fn+B could restore functionality or in general it is another piece of useless crap and need an eeprom programmer.
can I buy stock in your company, your good and will grow. thanks for the stories, I like hearing about your past.
Hello. I have an asus tuf gaming. With an intel graphics card and a rtx 2060. It is a gaming laptop pc. I was playing one day and had a kind of glitch on the screen. I forced the pc to stop. And by turning it back on, everything worked except the screen which remained completely black. The fans are running. But the keyboard shows a red light. I have tried all the methods of removing the ram sticks, press the ignition button after disconnecting the battery. Nothing works. I know that with an external keyboard and perhaps specified manipulations, one can find a solution. Help me please.
Why should be the bios password?
msi gs60 no charging light no display light no hdd light kyebord lights on fan turn on but with no display any thing that can help ?
New subscriber...loved what u did here
Hello Sir pls notice me, what did you do on the board? just to hit that area? Or you do some or put something to mother board?
Dear Sir
Your videos are very perfect and clearly. I want to ask you abt laptop Toshiba L855. I have bought that motherboard chipset intel Hm7670 Gpu Hd4000. When i tested with cpu i5 2450m ( from my old motherboard L850) only adapter led and power on led are on, the fan no blowing, blank screen. This case same like when i tested with my old motherboard L850. I want to ask you this problem is broken motherboard or my old cpu i5 is broken or cpu i5 is not support to motherboard which must use cpu I5 Gen.3. Fyi: i haxe check my old motherboard chipset SLJ8E, the label put near Ram are same with new motherboard L855, also seller said my old cpu is not support, must use i5 Gen.3. So i want to make sure it the broken motherboard or cpu i5 is not support to motherboard. Pls be inform soon. Thank you.
Why this problem occur in Toshiba laptop
Hi sir. How about asus fx95g . The fan is working but no display ..
i have the same problem i should do the same.....what do you say
I had this laptop and I fixed it with high tempature. But somtimes it flicker on the screen. Do you know what to do?
I have the exact same laptop with the exact same problem 😲
Did you open it up ? Do you have multimeter
Nope I didn't. I am not good at these things. Just have the exact same laptop. I assume same problem so will take it today to the professionals 😅
So what exactly was the problem? I have a toshiba satellite l850d-12q where the screen intermittently works fine and other times it's like the back light isn't working and you can just about make out things on the screen and eventually see the desktop when it's booted up. Any ideas what that might be? Any help would be much appreciated.
Hello,i have a toshiba A200 which starts with pushbutton and also can stop with it but have no screen,no beep,no hdd activity and only the fan spins from time to time and this could last to eternity.It does exactly the same even cpu,graphics board or both are removed.I have tried wincrisis usb but nothing except fan spinning to max speed.All the voltages look correct and the worst of all is that bios is a parallel flash 40 pins ic and has no TOKIN caps at all for replace.Any ideas please?
I have Asus X540s 2 examples and one of them does power on, boot to windows but there is no display on the screen at all. I swapped the motherboards to see if it was a monitor but it was the same scenario with no display on the screen. I tried some reset tricks like holding the power switch or removing battery etc. but It didn't help. I also tried windows key and +B but still nothing. I have a question on what to check on motherboard first to find any possible shorts. All ram is soldered into motherboard. I checked components around monitor connector -3.65V but it seems like they are fine. Any advices on what to check next?
Sorin, why the amp meter does not show any current flowing? Thanks
I have problem with my toshiba satellite laptop if i install the 2nd ram in the 2nd slot the screen become black no display,but if only one ram stick 1 install in the 1st slot it works.what is the possible problem of this?
I had a black screen on Toshiba Satellite C650. It had two RAM sticks in. Saw your post (am replying to it) removed second RAM stick and it booted. Problem: Faulty RAM stick. Thanks
And how do I build it again
12:15 What did he put?
late, but i have a toshiba A205-S4577 with a bios password and a bad screen. Would this work with it?
ok thanks
hello sir may asus X54C no display in lcd but i connect to the External monitor have a display same problem in my acer Notebook..
Mister 500 Degrees
Is it ever an issue with the inverter bar ?
What is the number of pins you are shorting to start the computer. and is it always the same?
You need to find plus with multimeter which is 3.3v i think . Put black probe of the multimeter on copper circle anywhere on board and try pins with red one by one ! You should find 3.3v . I think laptop then should power up . Or you can use lat screwdriver to short that pin ,which is in most cases second one or one before the last pin, with first or last, in case where the plus is . You need to have power with charger or battery when finding plus on power pins . But DON'T FORGET TO PUT BLACK PROBE IN COPPER CIRCLE AND FIRST FIND PLUS PIN ! Hope I helped you . :)
Can you help by removing bios for toshiba c50-d?
Hii.. sir
Same laptop and same problem..
But I don't have that hitting meachine
Hi nice video!
I have a Toshiba Laptop which is taking time to switch on, and it has too much wave sound when I switch on, and when I try to watch a movie on that it doesn't bring the movie a HD processor.
So what can I do Please
nice job
Hello Sir,
I am having a problem and hope that you could help me out please
I have an Asus rog gl752vw Laptop
When plugged in with charger the charger light is on, then when I press the power button the led turns on then immediately turns off with no display. I tried removing the ram and got no beeps, I reset the CMOS battery and still no luck I made sure the charger was giving proper voltages and it was and I checked all the USBs, when I do charge the laptop the touchpad gets a bit warm and thats it. Please can you help me out :)
I removed the hinge covers and that solved the problem
Bruh wtf is a hinge cover learn to be specific man lol
@@rjbeatsradio2172 Is it part of the inner screen bezel? As part of the base there are two plastic mouldings (which cover the hinges . . . )?
i had some overheating issues with the same pc. i took it apart and cleaded it out. applied fresh artic silver to the heat sinks and cant get video now. is it possible i damaged the video chip?
There no damage from the graphics chip but from what i heard is the pins on the one of the north or south bridge is not properly soldered so over time they come loose and u would need to reflow them to fix it.
@@joshchelvolski1033 Just chiming in for anyone else who might stumble upon this. The graphics chip or APU is soldered using zero lead solder which is prone to cracking. In order for a permanent fix the graphics chip would need to be reballed and soldered again not something that can be done without the right tools and equipment. What Sorin basically did is get the solder to move around and create a connection but again after some time it will fail again until it is reballed professionally in this case its not cost effective.
I was do like u do but still no working on my laptop toshiba L645. .. kiss from bali-indonesia
Thanks!!!!!
Hi, i have the same issue. However , my fan does run with power on, but nothing is on screen. Please advise... btw, what's that square piece with gray space color on the motherboard to help the screen turning on? Please share the name of that piece. Thank you much in advance
The gray thing is a thermal pad, it's for cooling the área that was heated
Another great "the dogs bollox" fix vid
Please sir how could you tell it was the gpu?
Hello sir my laptop power on but no display show plz help me