Thank you for your feedback. We apologize for the mistake, however it has been rectified during the day of installation itself. But, we couldn't highlight that correction in the video. We appreciate your valuable feedback, which will help us improve for the future.
Sorry to hear that your Texmo pressure pump is malfunctioning! Here are some potential reasons for the jerk and inconsistent water flow: 1. Airlock: Air might be trapped in the pump or pipes, causing the jerk. 2. Clogged or blocked pipes: Debris, sediment, or mineral buildup might be obstructing the water flow. 3. Worn or damaged valves: Faulty or worn-out valves can disrupt the water flow. 4. Incorrect pump settings: Improperly adjusted pump pressure or flow rate might cause the jerk. 5. Low water level: Insufficient water supply or low water pressure can lead to inconsistent flow. 6. Pump malfunction: Internal pump issues, such as worn bearings or a faulty impeller, might be causing the problem. 7. Pipe installation issues: Incorrectly installed or sized pipes can lead to water flow problems. To troubleshoot, you can: 1. Check the pump's air release valve to ensure it's working correctly. 2. Inspect the pipes for blockages or kinks. 3. Verify the pump settings are correct. 4. Ensure the water level is sufficient. 5. Consult the user manual or contact Texmo's customer support for guidance. If the issue persists, it's recommended to consult a professional plumber or the manufacturer's authorized service technician for further assistance.
Sorry, sir. We do not have the authority to send it there. However, we will enquire in the company about its possibilities. Thanks for watching the video.
Thank you for subtitles. There are few pressure pumps without tanks. What is the difference? Do I need the pressure tank? There is a huge cost variation
Sir, For manual operations, you can use pressure pumps without tanks. It will not cut off and the pump-set run until you turn it off. But in the pressure pump with the tanks, you will have a bladder-accumulator system inside the tank that will maintain a certain pressure, and by sensing that pressure level (by a pressure switch) the pump-set will cut in or cut off automatically. We will soon upload a comparison video regarding this. Thank you.
Thank you, sir. Please keep AQUATEX as your priority. It is one of the premium brands with reliable products. For more information, you can contact your nearby AQUAGROUP dealer. Thank you.
No sir, there will be a pressure switch, in which we can set the pressure range. That will automatically cut off the pump when it attains the maximum pressure limit. And when we open the tap, the pressure will get reduced and the pump will start automatically when it falls below its minimum level. This is how the booster pumps work. Thank you.
உங்களுக்கு Test run தேவைப்பட்டால், அருகிலுள்ள Aquagroup டீலரைத் தொடர்பு கொள்ளவும். நீங்கள் திண்டுக்கல் அல்லது பழனியை சேர்ந்தவர்கள் என்றால் எங்களை தொடர்பு கொள்ளவும். (9944880624)
Good effort and clear-cut explanation. Keep it up Rejin and Team.
Thank you 🙏
Well explaination about Pressure Booster pump. Y strainer position was incorrect sir. Usually fitted in downward position..
Thank you for your feedback.
We apologize for the mistake, however it has been rectified during the day of installation itself.
But, we couldn't highlight that correction in the video.
We appreciate your valuable feedback, which will help us improve for the future.
👌அருமை....🔥
Thank you 🙏
5:10 பழனி மலை தண்டாயுதபாணி முருகன் கோவில் கோபுர தரிசனம்.
👌👌👌Usefull video👍👍👍
Thank you. Please keep watching 🙏. Will upload more videos.
Super uncle 👌👌👌👌
Thank you
Very nice installation work. Well done.
Thank you sir
Informative.
Thank you 🙏
Y strainer installation should face downward to retain the dust. As it is facing up it will not collect the dust particles.
Yes sir, it was a mistake while covering the video. Later we changed it to downward direction. Thank you for your valuable feedback.
Super bro
Thank you for your valuable support 🙏
Tvcs service Thanjai.....
👍
Super
Thank you 🙏
Super😍😍
Thank you 🙏
@@VNJENGINEERING hello
My texmo pump is giving a jerk. No constant flow of water. What could be the reason.
Sorry to hear that your Texmo pressure pump is malfunctioning!
Here are some potential reasons for the jerk and inconsistent water flow:
1. Airlock: Air might be trapped in the pump or pipes, causing the jerk.
2. Clogged or blocked pipes: Debris, sediment, or mineral buildup might be obstructing the water flow.
3. Worn or damaged valves: Faulty or worn-out valves can disrupt the water flow.
4. Incorrect pump settings: Improperly adjusted pump pressure or flow rate might cause the jerk.
5. Low water level: Insufficient water supply or low water pressure can lead to inconsistent flow.
6. Pump malfunction: Internal pump issues, such as worn bearings or a faulty impeller, might be causing the problem.
7. Pipe installation issues: Incorrectly installed or sized pipes can lead to water flow problems.
To troubleshoot, you can:
1. Check the pump's air release valve to ensure it's working correctly.
2. Inspect the pipes for blockages or kinks.
3. Verify the pump settings are correct.
4. Ensure the water level is sufficient.
5. Consult the user manual or contact Texmo's customer support for guidance.
If the issue persists, it's recommended to consult a professional plumber or the manufacturer's authorized service technician for further assistance.
shower use pannumpoothu hot water mix agi varuma?
👌👌👌👌👌
Thank you 🙏
Itha video la iruka full setup cost evalo achu bro ...?
Brother, please enquire about the pricing details on 9944880624. Thanks for watching our video🙏
👍👍👍
Thank you 🙏
Very good explanation.
Thank you, sir.
Thanks for the useful demonstration Son. Can you tell me the size of NRV, and other fittings please?. It will be useful for the guys who watch this.
Yes sir. Thank you very much for your valuable feedback. We will mention the sizes from next videos onwards.
Is there any solution for dry run prevention ??
I think he didn't mention about any sensor presence
Solar pressure pump is available?
Can you send to srilanka?
Sorry, sir. We do not have the authority to send it there. However, we will enquire in the company about its possibilities. Thanks for watching the video.
Electricity consumption??
Discharge line gate valve missing💧
Thank you for subtitles. There are few pressure pumps without tanks. What is the difference? Do I need the pressure tank? There is a huge cost variation
Sir,
For manual operations, you can use pressure pumps without tanks. It will not cut off and the pump-set run until you turn it off.
But in the pressure pump with the tanks, you will have a bladder-accumulator system inside the tank that will maintain a certain pressure, and by sensing that pressure level (by a pressure switch) the pump-set will cut in or cut off automatically.
We will soon upload a comparison video regarding this.
Thank you.
@@VNJENGINEERING thank you very much. Looking forward to it
Thank you, sir.
Please keep AQUATEX as your priority. It is one of the premium brands with reliable products. For more information, you can contact your nearby AQUAGROUP dealer.
Thank you.
@@VNJENGINEERING sure
Anne pvc use panlama...
No sir. PVC is not preferable for high-pressure applications.
Im from Chennai, how much does this cost?
Hi sir. Kindly mention your location in Chennai so that we will share you the nearest dealers contact for communication. Thank you
Bro air pipe end cab lock panalama
Sure sir.
Do we get force water in entire home? Rain shower head need separate pump or this one enough for entire home?
Please contact us and we can suggest to you the best model for your application.
Thank you.
0.5HP enough for 4 bathroom house?
Yes sir.
Bro if I switched on the booster pump then if I don't use water tap then tap will get burst or what?
No sir, there will be a pressure switch, in which we can set the pressure range. That will automatically cut off the pump when it attains the maximum pressure limit.
And when we open the tap, the pressure will get reduced and the pump will start automatically when it falls below its minimum level.
This is how the booster pumps work.
Thank you.
Sir madurai ku pannalama
Sir, please contact us on 9944880624
Price please
Sir, please enquire at 9944880624. Thank you. 🙏
1 hp price please
Sir please contact us on 9944880624
Price??
Sir, Please WhatsApp at 9944880624.
Onum periya different therlaiyea
வீடியோவில் அதிக வித்தியாசத்தை நீங்கள் உணராமல் இருக்கலாம். ஆனால் நடைமுறையில் குறிப்பிடத்தக்க வேறுபாடு உள்ளது. நன்றி.
@@VNJENGINEERING apa sample anupuningana check pani solrean ..
உங்கள் வசதிக்காக, மற்றொரு வீடியோவில் பிரஷர் கேஜைப் பயன்படுத்தி இந்த பம்ப் செட்டின் அழுத்த வேறுபாட்டை அளவிடுகிறோம்.
நன்றி.
@@VNJENGINEERING it's not about pressure gauge reading ,,. I'm talking about output .. what we get..
உங்களுக்கு Test run தேவைப்பட்டால், அருகிலுள்ள Aquagroup டீலரைத் தொடர்பு கொள்ளவும்.
நீங்கள் திண்டுக்கல் அல்லது பழனியை சேர்ந்தவர்கள் என்றால் எங்களை தொடர்பு கொள்ளவும். (9944880624)
Bro
This type moter fit in sump near by
Not necessary brother. The head range of this pump is 16 to 28 meters.
Yes brother.
Hi
I am planning for it. Please share the contact details
9944880624
Great💓💓💓💓
Thank you ✌ Please contact us if you wish to buy one.
Hi