ZOHD Talon GT Kit - INAV HD FPV
HTML-код
- Опубликовано: 28 авг 2024
- ZOHD Talon GT Kit - INAV HD FPV with 3D printed nose for less drag.
Nose cone (Work in progress) - www.thingivers...
Flying weight with 3300 4S LiPO - 1080g
SpeedyBee F405-Wing - www.speedybee....
Runcam Link Phoenix HD FPV - ban.ggood.vip/...
FrSKY XAct servos - www.frsky-rc.c...
www.frsky-rc.c...
Matek ELRS R24D - bit.ly/3QAS0D0
M8Q SAM GPS - • Matek SAM / QMC5883 GPS
RadioMaster Zorro - bit.ly/3GmGMNl
RadioMaster Ranger Nano ELRS Module - bit.ly/3OdKkqM
Like, Subscribe & Ding the 🔔 - bit.ly/ANsubscribe
🔎 More information 🔍
I am happy to help with questions, but please before asking - read the description, read through other comments, use the video search box.
► Newton Airlines Uncut - bit.ly/NewtonAi...
► Newton Airlines blog - newtonairlines....
► Build plans - newtonairlines....
► My portal - anewton.net
► My Thingiverse - www.thingivers...
► INAV Basics and FAQs - newtonairlines....
► INAV Trouble-shooting Check list - newtonairlines....
► Depron Armin Wing build - • Depron wing build
► Skyshark P4X spars - www.kitesandfu...
👌🏽Support this channel 👌🏽
This is a fun hobby for me, not a money making venture. I don't have a Patreon account, and choose the minimum possible advertising option.
However if you would like to show your appreciation and support this channel here are some options -
►Paypal donations to apnewton@gmail.com
►Affiliate links - Purchase using the links provided in the video description.
If you use the affiliate links to make a purchase I may receive a commission at no extra cost to you.
👀 No single review will tell the whole story. Be clever, watch other reviews and shop around before making any purchase.
#AndrewNewton #ZOHDTalonGT #DJIPV
Andrew, I've always felt the Talons are one of your favorite planes to fly. So I guess that it's just another good one!
Thanks for this one and I wish you happy holidays and a nice 2024 new years!
Regards from Switzerland,
-Robert
Thanks for your contributions Robert, same to you.
I got the talon and the extreme through your link couple weeks ago. $120 for both of them crazy good deal. Thanks for sharing
Where can I buy these
@@CaptainCandycorn banggood. They still have the extreme for $62 looks like the talon went back up
Yeah, that was great video Andrew.
Speedy Bee working well??
Lovin the Nose..
Hey Andrew, awesome stuff. I've been following this series as I've been messing with a talon for a while but have had horrible luck launching it. Mine torque rolls like crazy during launch. I noticed you have built yours quite a bit lighter than mine, and I wonder if that is what is causing issues. I used the bigger 5k lion, gopro, vista with a fan, larger gps, etc. The aup must be quite a bit more than yours. Mine will also shimmy and approach stall at the speeds you were flying at, I have to keep the power up.... so I think these all point to maybe it needs a diet.
Yes many have had the same experience. It's not a great weight carrier. Much better keeping it light.
I just built up my Talon Rebel GT over Christmas break and my buildup in hardware and in INAV are almost the same! However, mine torque rolls into the ground right after launch release. CGs and Props are correct. I am in total manual mode since that's how I fly my fleet of planes. FPV is new to me but am not having fun figuring out this issue.
Ailerons reversed or stabilisation reversed? Too much throttle and soft throw? Too heavy and not enough launch speed?
@@AndrewNewton yes I’ve checked control surfaces. Throw is good, I think. Throttle is maybe 75 percent.
Can’t say I’ve ever had a plane need so much more hard toss and thrust at launch. I see no one launches these things in manual on their maiden’s and I’m getting convinced this thing can’t work in a manual launch either
Watch my maiden. Full manual, no FCB. What's your all up weight?
@@AndrewNewton flying weight is 1140 grams. I’m about to measure thrust and torque roll at full throttle with a scale. Being a baseball pitcher over 40 years ago, I thought I threw pretty hard still. Guess not, lol.
Got an sdcard to measure this next time as well. My Accelerometer measurements kept drifting in INAV so looking into that.
Thx for the response!
Terry
No problem Terry, this is an intriguing problem. Others have talked about torque roll too, but that's usually with overloaded Talons and AutoLaunch. Your weight is good, your throwing would be way better than mine and you're in Manual so the FC setup can't be the issue. Do you have video of the launch?
Hello Andrew, thank you very much for your videos. Have you rooted your DJI glasses with WTFOS? Are you satisfied? Is this stable with the current version? I've read about sudden reboots. Does this still happen? Thank you in advance for your answer...
Yes, very satisfied. I have not had any problems with rebooting and I have been using it for about 8 months.
5:20 - The moment when Andrew kneels before ZOHD.🤭
All hail might ZOHD
Looks much better without that chisel blunt nose Andrew...Enjoyed that turquoise water too, Summer looks great. I have two more of those Speedy Bee F405 FC, such a bargain IMO.... Sat count was dissapointing, using Galileo I regularly get 28 Satellites....using an M10 GPS...🤔😳😏🇬🇧
GPS is very variable here. Over 20 some days and barely 7 other days
@@AndrewNewton Strange, I thought GPS used Geostationary Satellites...that's a big difference day to day....Keep giving us your SUMMER videos Andrew please!!!
Atmospherics, Sunspot activity, GPS placement all affect it I guess. Our summer is starting a bit crazy. Cold and windy here but floods and bushfires in other parts.
Hi Andrew, can you please give us the link to the 3D printed nose....Many thanks Brian (Brit Expat in Germany)
Just uploaded here www.thingiverse.com/thing:6385013
I have no previous experience with aircraft. I want to use the auto launch and auto landing features, and if I am in trouble, I want to try turning on the support features. What does the plane do after the auto launch procedure? Do I need to turn on the RTH mode so that it draws circles in the air, or is this the continuation of the auto launch procedure?
I'm a little confused about the modes that should be on during takeoff or the ones that should be turned on afterwards. Since I use flysky i6x, there are only 4 toggle switches on the remote control. I can't assign all models
Wrong approach, you will be wasting your time and money. Learn to fly a plane first. INAV will not help you to learn the basic.
@@AndrewNewton The answer I expected came. I listen to the master with all my ears.:) i ll try
@@aGGreSSiv Excellent. Do you have a plane and Radio yet?
@@AndrewNewton Yes, I have a plane. A twin-engine cargo plane. I made it from cardboard material, I think it is a good choice to learn. easy to repair. I have an i6x remote control. I also bought a walksnail goggle, but of course I will not try to use FPV equipment until I learn it.
@@aGGreSSiv Great start, by building your own plane you would have already learned a lot.
Andrew do you have any sort of contact with zohd guys? I’ve been trying to get a hold of them via messages, FB, mails but they DO NOT reply! I am astonished… are they still in business? Thank you
Not anymore, they have gone quiet now.
few years ago i commented that soon we will be flying small satellites in our back yard this is coming
true now ,listen to the first 5 minutes of your commentary on the plane .you are talking satellite language.
Very true.