it’s funny coming on yt & seeing people put all this work into taking off the front bumper. then here i am, cutting 6 zip ties & boom, it’s off. lmaoooo
I just want to clarify for buyers who didn't know like myself but these new headlights require D2S and not D3S like the mechanic in the building says, it is noted on the products page but just in case people who watch the video get confused.
THIS is the video I was searching for! I couldn’t figure out how to feed the igniter through the headlight because it is simply too big. In this video you showed that you have to take apart and disconnect the igniter so as to take the igniter off and feed the cable through. Thanks! I wasn’t taking the igniter apart because of the warning label on the ballast that says you can die from opening it lol.
You need d3s instead of d2s, not instead of d3r. The R stands for reflector and s for projector. So you need the "S" Type bulps. You can also reuse d2s i think
Hey A question: Which type of Plug or socket type 350z 2008 has? Like H7 or H9 or something else? I want order Led and xenon but don’t the right plug. Plz help
@@callofduty3813 I just bought a sec pair and they are doing the same thing. I found out it is a dual filament bulb. Meaning it works as a parking light as well. I'll post a video I came across explaining this. The guy talks about it @ 9:37 check it out good knowledge. Link Below ruclips.net/video/U3FeIDt5gvU/видео.html
My passenger headlight is a snug fit. My driver headlight isn’t though? When I put In my driver headlight it didn’t line up on a screw all the way so when I have my lights on at night you can see it aiming down a bit. Any solution?
I found a way also found a tutorial on RUclips you can buy or use your old connector and covert the 8 pin from the depo to your 6 pin look it up I was literally trying to figure it out for the longest and finally found it ( 8pin to 6 pin conversion)
Cesareo Morales I can find a connector kit to convert from 8 pin to 6 pin :-) Have a nice car life! ...is my English correct? English is difficult!! Thanks,
So I just received these headlight housings and I noticed in this video you mentioned that it requires D3S bulbs but in the product description on your site it says it requires D2S bulbs. So which bulb size do these headlight housings really need?!
I'm wondering that same thing right now since I just spent $300 on D2S based on the product descriptions everywhere. The 3157A turn signal bulbs don't fit either - those are also the suggested size. I think I'll be returning these lenses since they cost a shit ton.
Get all the bulbs out, And shake the water out. Try to dry as much of the water as possible with some kind of cloth, other wise it will leave a water mark/spots :( I tried to be fast and let a fan dry it but that’s exactly what caused the water marks :( Also like he said replace the O-rings and make sure you screw everything evenly. Again if you don’t water can get in
couldn't find the exact one but a similar style should be this guy right here conceptzperformance.com/injen-sp1986blk-cold-air-intake-black-nissan-350z-03-06-z33_p_298.php
yeah, it actually looks like they used the HR model style headlights, but either or works. I just order them for my car here is the link : www.andysautosport.com/products/depo__315-1162PXUSH2.html
On the 05 with factory HIDs, the turn signal bulb is different (the 06-08, Depo or OEM, use 3157NA bulb) and the HID bulb is a D2S (03-05 is D2R). So you'll need a couple of different bulbs, but your ballast and harness will transfer over.
@@Conceptzperformanceczp I just ordered this from y'all for my 2005 with factory HID.. please verify what I need to get 3157NA turn signal and D2R bulbs??? Or it now changes to D2S ?? I'm not clear on this
Where can I find that front bumper? I have an 03 350z in Le Mans Sunset aswell and I've been looking for a similar style bumper but I keep hearing bad things about fitment with almost all of them.
Josh is running a genuine Nismo V3 front bumper, we have them available here: conceptzperformance.com/nissan-infiniti-nissan-oem-nismo-v3-front-bumper-fascia-nissan-350z-z33-fbm22-1a45h_p_5345.php The nice thing with Nismo bumpers is, because they're genuine Nissan products, the fitment is perfect.
Beautiful 😍🙏🏼...this question has nothing to do with this video tutorial but was wondering if you don’t be mind me asking what’s ur rim setup?im looking into buy some rpf1s as well and ur fitment looks on point👌🏼Sub by the way
you can pick them up here: conceptzperformance.com/enkei-rpf1-racing-series-wheel-set-18-enk-rpf1-18x-universal_p_25364.php size is 18x10.5 +15 Square you just have to be cautious about tire size if you lower the car
You are correct! 03-05 style HIDs use a D2R bulb, the 06-08 (including DEPO) uses the D2S bulb. We caught this after uploading, but RUclips removed the ability to add annotations, so we weren't able to add an in-video correction. Good lookin' out!
@@everlasting1237 I found the oem Nissan ones for like $8 each, but I decided to try my luck at home depot and these worked perfectly for like $3 for 10 screws.
@@everlasting1237 my bad I completely forgot to check. I went to homedepot and got a 10 pack of phillips screw size: #8 x 1in .. Those worked perfectly for me
Airol Mabilog So that day it started I went to go wash my car and the inside got cloudy after, after a week the condensation never came back it was so weird, I went to go wash my car the next week and I was annoyed that It was going to come but it never did
Airol Mabilog first thing I did was take the headlight off the car and opened it up from the headlight cover and all that fog just started coming out , not sure how it would help but it was a pain in the ass for me at first.
As long as it came with factory HIDs they do fit. In fact, they'll fit any year with HIDs. It's only the cars with halogen headlights they aren't compatible with.
Nice lights, ridiculously priced. $500 plus bulbs, etc. I will scrub the lenses on my old lights or buy a cheaper chinese alternative. Not convinced that spending more in this case gets you higher quality.
Just saying these are trash, they look nice but at night the wiring in these are so bad or something is bad even with really nice headlights they don’t shine as bright as OEM
Gotta change my headlights but these are illegal in Europe, they don't have the fucking E symbol... A new pair from Nissan is more than 5000 euros so..... Depo it is!
it’s funny coming on yt & seeing people put all this work into taking off the front bumper. then here i am, cutting 6 zip ties & boom, it’s off. lmaoooo
Glad I’m not the only one 🤣
same
I just want to clarify for buyers who didn't know like myself but these new headlights require D2S and not D3S like the mechanic in the building says, it is noted on the products page but just in case people who watch the video get confused.
Facts, trip to auto had me watching it a second time then I knew something weren’t right
THIS is the video I was searching for! I couldn’t figure out how to feed the igniter through the headlight because it is simply too big. In this video you showed that you have to take apart and disconnect the igniter so as to take the igniter off and feed the cable through. Thanks! I wasn’t taking the igniter apart because of the warning label on the ballast that says you can die from opening it lol.
Was not aware you could use 06 headlights in 03 350z. They look good.
You need d3s instead of d2s, not instead of d3r. The R stands for reflector and s for projector. So you need the "S" Type bulps. You can also reuse d2s i think
You have good tasteful mods on the car. $600 for new headlights is not bad but definitely makes me want to just reclear my factory to save money
I just got LEDs for my 05 headlights, do I have to buy new bulbs again?🙄
Is there a way to keep the blinking bulb / running light shut off while the low and high beam is on ? So it only lights on when I’m indicating
Hi , how about the connectors from this car 6 pins to 8 pins ? Are they the same 03 from 08 ? Did you need a converter?
Hey A question:
Which type of Plug or socket type 350z 2008 has? Like H7 or H9 or something else? I want order Led and xenon but don’t the right plug. Plz help
If you’re using the original ballast and bulb holder then why would you get a different style bulb?
Why does the turn signal bulb stay on like driving lights?
I was thinking the same🤔
Are they supposed to be like that because I just bought some headlights and they turn on like that?
@@callofduty3813 I just bought a sec pair and they are doing the same thing. I found out it is a dual filament bulb. Meaning it works as a parking light as well. I'll post a video I came across explaining this. The guy talks about it @ 9:37 check it out good knowledge. Link Below
ruclips.net/video/U3FeIDt5gvU/видео.html
Looking for locking rings for my depo lamps....near impossible
I could never get the service cover on
My passenger headlight is a snug fit. My driver headlight isn’t though? When I put In my driver headlight it didn’t line up on a screw all the way so when I have my lights on at night you can see it aiming down a bit. Any solution?
Idk if I did something wrong but I have hyper flash
The D2R and D2S bulbs mentioned are for the headlights?
Push the metal wire tab down turn it counter clockwise wiggle and pull the light bulb assembly out 4 OEM 06 headlights
What if I do not have factory H.I.D
How do I get the amber lights to shut off? I don’t like them
I have an 03 and those exact deposit lights but my connectors are different
Cesareo Morales me too...
Why CZP's 02-05 headlight has the connector type of 06-08 headlight?
Can CZP-san teach us?
I found a way also found a tutorial on RUclips you can buy or use your old connector and covert the 8 pin from the depo to your 6 pin look it up I was literally trying to figure it out for the longest and finally found it ( 8pin to 6 pin conversion)
Cesareo Morales I can find a connector kit to convert from 8 pin to 6 pin :-)
Have a nice car life! ...is my English correct? English is difficult!!
Thanks,
ruclips.net/video/ATzNM4bJg8k/видео.html
Not Vlog where did you get the adapter for the 6 pin to 8 pin?
Do they shine in asymmetrical pattern for RHD cars, like most cars in Europe do?
So the bulbs don’t come with the depo headlights ? Well That’s pointless ??
So the d2r and d2s bulbs have the same number of pins to install without converting?
That’s what I’m wondering too
So I just received these headlight housings and I noticed in this video you mentioned that it requires D3S bulbs but in the product description on your site it says it requires D2S bulbs. So which bulb size do these headlight housings really need?!
I'm wondering that same thing right now since I just spent $300 on D2S based on the product descriptions everywhere. The 3157A turn signal bulbs don't fit either - those are also the suggested size.
I think I'll be returning these lenses since they cost a shit ton.
Any recommendations on how to get condensation out of your headlight ?
Get all the bulbs out, And shake the water out. Try to dry as much of the water as possible with some kind of cloth, other wise it will leave a water mark/spots :(
I tried to be fast and let a fan dry it but that’s exactly what caused the water marks :(
Also like he said replace the O-rings and make sure you screw everything evenly. Again if you don’t water can get in
What are the sizes and offsets for those wheels? Sweet care!
Great video helped me out a lot but where did u get ur cold air intake?
couldn't find the exact one but a similar style should be this guy right here
conceptzperformance.com/injen-sp1986blk-cold-air-intake-black-nissan-350z-03-06-z33_p_298.php
@@Conceptzperformanceczp is that a different injen intake? I have an Injen and it points downwards.
Can you install this on a 08 model ?
yeah, it actually looks like they used the HR model style headlights, but either or works. I just order them for my car here is the link : www.andysautosport.com/products/depo__315-1162PXUSH2.html
Where the amber light is they don’t work
I have a 2005 350z with factory HID low beams and Halogen high beams, will these be plug and play?
On the 05 with factory HIDs, the turn signal bulb is different (the 06-08, Depo or OEM, use 3157NA bulb) and the HID bulb is a D2S (03-05 is D2R). So you'll need a couple of different bulbs, but your ballast and harness will transfer over.
@@Conceptzperformanceczp I just ordered this from y'all for my 2005 with factory HID.. please verify what I need to get 3157NA turn signal and D2R bulbs??? Or it now changes to D2S ?? I'm not clear on this
@@lesdodis6222 You do need the 3157 turn signal. and I think D2R same as D2S...BTW, easy to change HID bulbs instead of the whole housing?
Concept performance... what kind of bumper do you have on the 350z ?I gotta get one for my 04 z1
It’s the Nismo n3r bumper
Mine did that and melted the plastic surrounding it.
Can I buy your old lights?
Where can I find that front bumper? I have an 03 350z in Le Mans Sunset aswell and I've been looking for a similar style bumper but I keep hearing bad things about fitment with almost all of them.
Josh is running a genuine Nismo V3 front bumper, we have them available here:
conceptzperformance.com/nissan-infiniti-nissan-oem-nismo-v3-front-bumper-fascia-nissan-350z-z33-fbm22-1a45h_p_5345.php
The nice thing with Nismo bumpers is, because they're genuine Nissan products, the fitment is perfect.
Beautiful 😍🙏🏼...this question has nothing to do with this video tutorial but was wondering if you don’t be mind me asking what’s ur rim setup?im looking into buy some rpf1s as well and ur fitment looks on point👌🏼Sub by the way
you can pick them up here: conceptzperformance.com/enkei-rpf1-racing-series-wheel-set-18-enk-rpf1-18x-universal_p_25364.php
size is 18x10.5 +15 Square
you just have to be cautious about tire size if you lower the car
My parking light don’t work
Anyone which of the two adjustment screws are for horizontal adjustment?
The lower deeper one
Is it possible to upgrade the turn signals with LEDs? If so which ones do you recommend?
You can you just need to buy a resistor and splice it into the harness, otherwise you’ll get “hyper flash” when you put your turn signals on.
That's exactly what I'm gonna do! Thanks for the info.
Do facelift 06 350z headlight unit fit on the pre face 350z?
no
are u able to get ones that arent tinted, but with the same neo effect?
But also the way the light reflects on the headlights
What bumper is that
Nismo bumper v3 I think
D2s bulb you mean?
You are correct! 03-05 style HIDs use a D2R bulb, the 06-08 (including DEPO) uses the D2S bulb. We caught this after uploading, but RUclips removed the ability to add annotations, so we weren't able to add an in-video correction. Good lookin' out!
What bumper is that?
Oem Nismo V3 bumper I believe
Do you know if matters if I use 4500k or a 5500k D2s bulb?
it does not, that's just the color temp of the bulb one is just slightly bluer than the other
@@Conceptzperformanceczp which one is more blue?
@@moy2970 typically the higher number the bluer
Discount code ?
I just got some of these headlights! However, does anybody know what size screws go to the ballast??? I can't find them to save my life.
did u find them
@@everlasting1237 I found the oem Nissan ones for like $8 each, but I decided to try my luck at home depot and these worked perfectly for like $3 for 10 screws.
@@everlasting1237 I know I have some left over in my garage, let me go find them and I'll post the size.
Please and thank you! Im about to get these bad boys on friday and id want to anticipate having them so i can just do the install in one sitting
@@everlasting1237 my bad I completely forgot to check. I went to homedepot and got a 10 pack of phillips screw size: #8 x 1in .. Those worked perfectly for me
Got a pair 4 days ago and my left hand drive headlight already has condensation 🤦🏽♂️
U change the seals?
Did you figured it out?? I’m having a same problem
Airol Mabilog So that day it started I went to go wash my car and the inside got cloudy after, after a week the condensation never came back it was so weird, I went to go wash my car the next week and I was annoyed that It was going to come but it never did
Airol Mabilog first thing I did was take the headlight off the car and opened it up from the headlight cover and all that fog just started coming out , not sure how it would help but it was a pain in the ass for me at first.
Nieson MobSquad Did you reseal the headlights??
you forgot to wire the ground cable again to the new headlights!!!
I was saying that in my head the whole video lol
@@steviekay_Z33 U don't have to ground the wire if you already have hid headlights
@@joestuehmer7967 The ground isn’t needed when transferring the ballast over?
How much for your OEM headlights
I'll do 150 for both
How much are those headlights
Hey Eddie, check the link in the video description, we have them online!
In the video he said it came with everything and when I went online it sells the o ring separate even the bulbs
They're meant exclusively for the 06-08, and with those cars, they don't require anything else, you just swap everything over from your original.
Do these lights work with a 2005 350z?
As long as it came with factory HIDs they do fit. In fact, they'll fit any year with HIDs. It's only the cars with halogen headlights they aren't compatible with.
Nice lights, ridiculously priced. $500 plus bulbs, etc. I will scrub the lenses on my old lights or buy a cheaper chinese alternative. Not convinced that spending more in this case gets you higher quality.
Just saying these are trash, they look nice but at night the wiring in these are so bad or something is bad even with really nice headlights they don’t shine as bright as OEM
How long have you had yours?
made in china???
Gotta change my headlights but these are illegal in Europe, they don't have the fucking E symbol... A new pair from Nissan is more than 5000 euros so..... Depo it is!
Does it come with two separate lights high beams and low beams or how would I wire it since I have a 03 and they come separately both lights
Do i need the grounding strap?