PLEASE NOTE: this sadly isn't supported on FrSky radios. From what I can make out it's related to a few hardware issues caused by the sharing and a signal line and FrSkys attempts to not support 3rd party devices like Crossfire. Such a shame...
Ugh, FrSky keeps making poor decisions apparently. Well, I've got my radio master on order. Happy to see that my X-lite can be a trainer for friends and family when they want to come with me and try their hand at flying
So its not something that the OpenTX community will be able to solve then? Such a shame. I have my X9D Plus 2019 and was hoping I could setup wireless trainer with my external module after seeing this video :-(
So I'm being stiffed by FrSky yet again. :-/ They're not a big company with a clueless following like Apple or Intel so why so they think people will put up with this? Oh well, I guess my X7 will be my last FrSky radio. Hello Radiomaster...
What a great video! I am not sure that I understand completely, but does it work like so: Radiomaster internal module talks to receiver on quad; external module on Radiomaster acts as a receiver for the trainee operating the Qx7 ? Very interesting that external multi module can bind to the Qx7, had no idea you could do that. 👍
Lee, Great video, also think Wireless Training is terrific! and use it all the time with the grandson with FrSky D16 Models and two Q-X7S Radios ( one of which has a D16 Linker + Module in it but I'm licked into FrSky receivers ONLY right now in the models. I currently have this T16S on order and what I am MOST interested in knowing is if it is possible to do Wireless Training in MASTER MULTI Mode ( or MASTER SBUS mode) across the wireless link and control a NON-FrSky Rx in the model ( either with or without telemetry). Right now with my setup I MUST use my Q-X7S's Training with models in D16 BECAUSE it's INternal RF is not Multi capable.. and I have no MULTI capable INTERNAL RF module..in either Q-X7S Radio... so I must carry the "student" radio around with a iGanme + MPM in it and use it to fly all my Non D16 models in them. I want to simply use the other non FrSky planes and quads with non-FrSky Rx's while wireless training, AS WELL AS flying them solo.. but without having to use a different. second Radio with an EXT MPM in it to do it. I see that you can talk to Crossfire models using wireless training with a CRSF Module in the JR BAY .. that's cool but the only config that makes sense for me and likely MANY MANY others getting this radio is one where we are doing wireless training with models that are in INTERNAL Multi mode ASSAN, DSM2, any of the other many non-FrSky protocols the internal; RF Multi can support.. Will that wireless link work when a master T16S Radio is set to to control a bound Spectrum, or Futaba, or ASSAN or any of the nearly 100 other possible MULTI Protocols when it's set to INTERNAL RF at the same time?
I show how to use both the internal and external Multiprorocol module for connecting to the other radio. If you have another module or internal transmitter in the radio then you can pass the trainer from the Multiprorocol module to the other (as shown with the Crossfire setup).. I hope that helps.. That other module could be an internal or internal Spektrum module.. This is a poorly documented part of of Opentx and the Multiprorocol stuff.. Hope that helps
@@Painless360 Yes it helps, and yes, I agree it's not documented, I've asked several times bot on Banggood and via Radiomaster Support and never got a reply or confirmation.. so having an influencer like yourself that actually HAS the radio and can actually try it and confirm 1st hand that wireless training will work properly when the T16S's internal RF module is set in a non-FrSKY mode with the model is something I guess I'll have to do myself when I actually get the radio delivered. I've now watched 6 different YT Reviews by those of you lucky ones that got these pre-release radios and no one has apparently attempted or tested it yet..
The module youre not using for the wireless trainer link works as normal. So you can control whatever you want (as long as the reciever is supported by the module not being used for trainer). I thought the video and my answer made that clear. In case you are still confused - it will work with the master radio connected to a Spectrum reviever. You'll always get more detail asking via Patreon.... ;)
Hi Lee: if you can bind your QX7 to a multi-protocol module in the back of a T16, can you bind to one in the back of a Taranis? It seems pretty much the same thing to my simple brain! I've tried and I don't see the same menu choices. Is it an OpenTX version issue or is it something more fundamental? Thanks!
@@Painless360 I'm on 2.3.7, the latest production version, and multiprotocol module support is turned on. The module works fine, it's just that I don't see the same menu choices on my Taranis as your video shows on the TX16
Lee, great video but I have a problem with the throttle. I have two Radiomaster TX 16S. Normally I use throttle -100 to +100 throw but when I switch over to the student the throttle trow change to 0 to 100 and that means I gave the student half throttle. By the way when connecting to the Flightsimulator dongle with the stereo 3,5 mm jack it won't work. The USB connection you mentioned with a Windows driver is also a pain in the.... Only my old Futaba 7C works flawless. Thanks for your support.
Hello, here you are using the RadioMaster transmitter as master transmitter. I should use the RadioMaster as student ( => me ) transmitter and SPEKTRUM transmiiter for the teacher. How do we proceed then ???
I've been trying setup a horus x10s as master and jumper t16 pro v2 as slave wireless lol my head is still spinning ! I can get them to work with a cable if i dont push the cable fully into the jumper t16. Blue tooth seems to be a joke on both. Funny part about it all is i dont have anyone to train!
am having issue whith this. I have a tx16s and an extra 4 in 1 module and a taranis. I connect the internal module to the plane and connect the external module as rx to the taranis. only than i get extreme range issue between trainer and student. They keep loosing connection.
I've not seen that. Use the tune function to make sure that the signal is as good as it can be and beware that getting the antennas too close can cause the link to hiccup.. Best of luck
Thanks for your Video. I have a question: with my taranis and a sbus reciever connected back in it I binded turnigy even spectrum with sbus compatible reciever to be able to use trainer wireless with them. Only in master selecting master /sbus in trainer ítem and binding slave radio to the reciever connected back in Taranis works fine. But what my surprise that in my Radiomaster this trainer opción (master /sbus) is not avaible. Only master /serial or master/multi but even after binding it is not posible to use wireless trainer. Also I seclect in SYS the trainer RF as Serialb but imposible to trainer option as in Taranis. Is missing Trainer/sbus in Radiomaster ? Is any was to do this without a external module and using a sbus reciber in RM back pins? Thanks in advance and sorry for my low English level .
I like this video. I've been trying to set this up for months with my T16 and a Flysky FS-I6X (my daughter is interested in getting into the hobby and its a great size for her small hands). However, I still cant seem to get them to bind together fully. The T16 is set to FS2A_RX and Receiver 0. When I bind the T16 seems happy, however the FS-i6X keeps showing "RX Binding..." and never seems to fully bind (this happens regardless of PPM/PWM, iBus/SBUS settings in the FS-I6X). Would it be possible for you to try this with the Flysky protocol?
If I get another FlySky radio in I'll give it a go. OpenTX 2.3.8 seems to have some improvements with this stuff from what I can see and it helped here to upgrade the multi-protocol module to the latest version of the firmware too.. Best of luck!
I have not tried this myself, but some flysky receivers do not actually send anything back to the radio, so it doesn't know if it is actually bound. With these, after a few seconds, you press cancel, it takes you back to the home screen and the receiver is bound. Maybe it is the same with the multi module.
Any luck? I basically have the same situation, kid wants to get into the hobby and the FS-i6 is around and has the right size. It works perfectly with a Taranis with the FRSKY protocols, no luck with the FlySky protocol though.
Looks like they have finally acknowledged a bug with the Flysky trainer mode in the multi protocol module software. Hopefully, they will sort it out for next release github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/500
Just curious, How do you keep the bind on the plane???? every time I bind to the Frsky radio it in turn unbinds to the plane. So how do you bind it to both?
Nice video again, i love to see them, can you tell me if a mono cable works on a TX16S i want to use it for my DIY HT........ Keep up the good work, learn so much from you👍👍
hi nice to c u , i want ask you. the master radio must have maste/mutil model and it can be work. i use nv14+4in1 x9lite+4in1, they can not be work, can you help me??
Maybe, I've not tried it. The wireless trainer stuff is a funky function of the 4in1 MPM module so not sure if the standard radio that can't emulate an FrSky receiver can do that...
@@Painless360 Thx! You have contact to tech people, clould you ask them if is it possible to change the internal xjt module in Qx7,to a multi module? Thx!
hey hopefully you can help me out. wanted to use this feature with the wt01 to work wireless with my goggles head tracker port. I have a 4-1 zorro radio internal with crossfire module, can I bind to the wt01 and put it on my goggle to send trainer channels for headtracking, while also using crossfire? sound like it should work.
Hi everyone. A couple of years ago I bought a furibee darkmax 220 with what seems to me to be a frsky fd800 any ideas how to bind this with my radiomaster and or mastefire module? I have tried frsky d16 d8 and d8 clone modes and I can't seem to get them to come up on betaflight. I do how ever see my green light turn solid when I bind and solid when I green when I reboot my quad. once I plug in to beta flight tho I get a signal rx flag.
Hi Lee, Hope all is well.Have you connect tx16s with the xjt module to a flysky FS16x. Or to the R168 rx. I tried many time following the XJT document with no success. Now if you took several hrs with the Radiomaster folks I think I am sol. as I have none of your expertise I really thought connecting the R168 to the module would be click, click and done. grrr nope. I can connect the R168 to the internal module very easy and quick. any suggestions. Thanks in advance . Jeff
If you are talking about the Frsky XJT module, that is an Frsky product so will only talk to Frsky recievers not Flysky. There are several options for Frsky too and you need to select the right one. Check out my video showing the to bind stuff using the internal multiprotocol module.. best of luck
@@Painless360 Thanks Lee I will check out your video. I was under the impression the Radiomaster R168 acted same as a frsky rx. and yes it is a frsky XJT module so I thought the R168 should connect easly to the XJT module. I was trying to set up a trainer system using my TX16s and a FLYSKY FSi6x with Radiomaster R168 RX but sounds like the Module will not connect to the R168.and the internal module will not connect the FLSKY tx wirelessly. Darn.
@@Painless360 Yes I had watched that video before and it helped me before with originally binding my TX16S to my FS-1A10b rx and to the R168 rx. but now I am trying to use the external module FRSKY XJT to connect to the R168 but I guess that may not be an option and can only connect to it with the internal module.
The Horus is going. I had the TX16S for my Birthday. I am so happy with it. Even bound it to my WLToys V911S and V950. Very happy. Thanks for all the great tips.
Can you please make a video on how to get headtracker to work wit this radio, i use the tx16s and full crossfire. I can not wrap my head around it🙄 Thanks in advance
Hi. Thanks alot for your really great channel. I should get my new Radiomaster TX16s in the mail today, and I'd like to know if it's possible to use a multi-protocol 4in1 STM32 module (you made a video about it 2-3 years ago) as a trainer module and use one of my old Futaba transmitters as slave TX ? Regards.
Very cool. I just wish I had someone to train me. I'm older and just getting into quads, and not having such a great experience in Velocidrone. It's only been one day though. *lol* Thanks for the video.
Hope you can help me. I have jumper t16 pro v2 setup to kopilot I'm using mode 2 AETR. The motor will only start when over half way up on throdle. any sugestions?
All I know about the setup of the Kopilot is in the series I made for it...Check what mode you're in and if the ESC i calibrated and connected propertly. I hope those videos showing how I set it up helps.. Best of luck
Hi I’m James, congrats on your videos very informative and to the point. I need a bit of help with connecting witless trainer with my TX16S, can you please advise how I set up trainer mode with FlyskyFSi6 transmitter with radio master TX16S as the trainer transmitter. I set up trainer mode on the TX16S but I don’t know what protocol I need to select for the fsi6 transmitter?
Just one question with this module, there is an option to fine tune for each make of receiver. How can you store that if the transmitter is turned off? Thank you
Is that mess caused by radiomaster or the open tx changes and improvements ? it looks easy - if you have that receipe you had developed with Radiomaster "Ben" I have ordered mine ... and hope to get it soon and running quickly cause I have to move the whole Jumper T16 fleet of receivers to the radiomaster which I had done just3 months ago coming from the X9D to Jumper T16 Pro Hall Gimbal to.
Do you know if the same hall gimbals used to mod the old taes is x9d will fit the tx16s? They look the same but could be different connectors I suppose. Seeing as the non hall model is in stock and I mod ed my old semi broken x9d i could just move them over.
@@Painless360 Hi Lee, I remember when I updated to 2.2.4 I selected the multi option but in 2.3.7 I cant see it - I've just looked at companion after reading you reply and I still cant see multi protocol support
Awesome video love the way you clearly explain things. you’re videos are my go to when I’m trying to figure something out.thank you. So I have a question. I’ve always wanted to hook up a PC gaming joystick to an RC radio but haven’t found a simple or inexpensive way to do it. Would this more advanced radio Perhaps provide a way to do that?
Hi nice video, thanks a lot. by the way, I have extra unit of Internal 4-in-1 RadioMaster module .. can this internet module unit able to *plug* to the external module socket ? If possible, I shall be able to use this way to have both internal & external 4-in-1 module, and setup the wireless trainer ? Very much appreciate, if anyone can advise
![OpenTx Wireless Trainer How-to • Complete Guide for Radiomaster TX16s or Jumper T18 • [Intermediate]](http://i.ytimg.com/vi/iiZehq3aS2A/mqdefault.jpg)
![OpenTx Wireless Trainer How-to • Complete Guide for Radiomaster TX16s or Jumper T18 • [Intermediate]](/img/tr.png)
PLEASE NOTE: this sadly isn't supported on FrSky radios. From what I can make out it's related to a few hardware issues caused by the sharing and a signal line and FrSkys attempts to not support 3rd party devices like Crossfire. Such a shame...
Ugh, FrSky keeps making poor decisions apparently. Well, I've got my radio master on order. Happy to see that my X-lite can be a trainer for friends and family when they want to come with me and try their hand at flying
So its not something that the OpenTX community will be able to solve then? Such a shame. I have my X9D Plus 2019 and was hoping I could setup wireless trainer with my external module after seeing this video :-(
So I'm being stiffed by FrSky yet again. :-/ They're not a big company with a clueless following like Apple or Intel so why so they think people will put up with this? Oh well, I guess my X7 will be my last FrSky radio.
Hello Radiomaster...
@@JorgeJimenez2020 hello did you get your xlite to bind to the rm tx16s? i cannot get them to bind
Very cool! Thanks for doing the research and sharing.
What a great video! I am not sure that I understand completely, but does it work like so: Radiomaster internal module talks to receiver on quad; external module on Radiomaster acts as a receiver for the trainee operating the Qx7 ? Very interesting that external multi module can bind to the Qx7, had no idea you could do that. 👍
I’m trying between a Tx16s and a Tx16s mk2 and can’t get it to work
Hi there every one, Hope ur doing well during these times. Take care and stay.
Thank you! You too!
Lee, Great video, also think Wireless Training is terrific! and use it all the time with the grandson with FrSky D16 Models and two Q-X7S Radios ( one of which has a D16 Linker + Module in it but I'm licked into FrSky receivers ONLY right now in the models. I currently have this T16S on order and what I am MOST interested in knowing is if it is possible to do Wireless Training in MASTER MULTI Mode ( or MASTER SBUS mode) across the wireless link and control a NON-FrSky Rx in the model ( either with or without telemetry). Right now with my setup I MUST use my Q-X7S's Training with models in D16 BECAUSE it's INternal RF is not Multi capable.. and I have no MULTI capable INTERNAL RF module..in either Q-X7S Radio... so I must carry the "student" radio around with a iGanme + MPM in it and use it to fly all my Non D16 models in them. I want to simply use the other non FrSky planes and quads with non-FrSky Rx's while wireless training, AS WELL AS flying them solo.. but without having to use a different. second Radio with an EXT MPM in it to do it.
I see that you can talk to Crossfire models using wireless training with a CRSF Module in the JR BAY .. that's cool but the only config that makes sense for me and likely MANY MANY others getting this radio is one where we are doing wireless training with models that are in INTERNAL Multi mode ASSAN, DSM2, any of the other many non-FrSky protocols the internal; RF Multi can support..
Will that wireless link work when a master T16S Radio is set to to control a bound Spectrum, or Futaba, or ASSAN or any of the nearly 100 other possible MULTI Protocols when it's set to INTERNAL RF at the same time?
I show how to use both the internal and external Multiprorocol module for connecting to the other radio. If you have another module or internal transmitter in the radio then you can pass the trainer from the Multiprorocol module to the other (as shown with the Crossfire setup).. I hope that helps.. That other module could be an internal or internal Spektrum module.. This is a poorly documented part of of Opentx and the Multiprorocol stuff.. Hope that helps
@@Painless360 Yes it helps, and yes, I agree it's not documented, I've asked several times bot on Banggood and via Radiomaster Support and never got a reply or confirmation.. so having an influencer like yourself that actually HAS the radio and can actually try it and confirm 1st hand that wireless training will work properly when the T16S's internal RF module is set in a non-FrSKY mode with the model is something I guess I'll have to do myself when I actually get the radio delivered. I've now watched 6 different YT Reviews by those of you lucky ones that got these pre-release radios and no one has apparently attempted or tested it yet..
The module youre not using for the wireless trainer link works as normal. So you can control whatever you want (as long as the reciever is supported by the module not being used for trainer). I thought the video and my answer made that clear. In case you are still confused - it will work with the master radio connected to a Spectrum reviever. You'll always get more detail asking via Patreon.... ;)
BTW: www.rcgroups.com/forums/showpost.php?p=44598885&postcount=17755 clarifies the requirement a bit more..
just tried on my jumper with ext multimodule. no rx protocol... just multi clone tx and erasetx
A very important fact you did not mention is to SWITCH OFF THE ERLS OR MODULE THAT IS CONNECTED TO THE MODEL WHILE binding the MPM Rx to student radio
Hi Lee: if you can bind your QX7 to a multi-protocol module in the back of a T16, can you bind to one in the back of a Taranis? It seems pretty much the same thing to my simple brain! I've tried and I don't see the same menu choices. Is it an OpenTX version issue or is it something more fundamental? Thanks!
You'll need an up to date Opentx verison with the Multiprorocol module support turned on..
@@Painless360 I'm on 2.3.7, the latest production version, and multiprotocol module support is turned on. The module works fine, it's just that I don't see the same menu choices on my Taranis as your video shows on the TX16
Lee, great video but I have a problem with the throttle. I have two Radiomaster TX 16S. Normally I use throttle -100 to +100 throw but when I switch over to the student the throttle trow change to 0 to 100 and that means I gave the student half throttle. By the way when connecting to the Flightsimulator dongle with the stereo 3,5 mm jack it won't work. The USB connection you mentioned with a Windows driver is also a pain in the.... Only my old Futaba 7C works flawless. Thanks for your support.
I've not seen that here, let me me know when you gets it working... Best of luck
Hello, here you are using the RadioMaster transmitter as master transmitter. I should use the RadioMaster as student ( => me ) transmitter and SPEKTRUM transmiiter for the teacher. How do we proceed then ???
I'm not sure how that would work. Let me know if you get it working...
perhaps changing the firmware on the receivers rather than finding away around?
I've been trying setup a horus x10s as master and jumper t16 pro v2 as slave wireless lol my head is still spinning ! I can get them to work with a cable if i dont push the cable fully into the jumper t16. Blue tooth seems to be a joke on both. Funny part about it all is i dont have anyone to train!
am having issue whith this. I have a tx16s and an extra 4 in 1 module and a taranis. I connect the internal module to the plane and connect the external module as rx to the taranis. only than i get extreme range issue between trainer and student. They keep loosing connection.
I've not seen that. Use the tune function to make sure that the signal is as good as it can be and beware that getting the antennas too close can cause the link to hiccup.. Best of luck
@@Painless360 yes that was the issue I brought the module antenna 5cm to the left with an extension lead and i have a nice link.
Thanks for your Video. I have a question: with my taranis and a sbus reciever connected back in it I binded turnigy even spectrum with sbus compatible reciever to be able to use trainer wireless with them. Only in master selecting master /sbus in trainer ítem and binding slave radio to the reciever connected back in Taranis works fine. But what my surprise that in my Radiomaster this trainer opción (master /sbus) is not avaible. Only master /serial or master/multi but even after binding it is not posible to use wireless trainer. Also I seclect in SYS the trainer RF as Serialb but imposible to trainer option as in Taranis. Is missing Trainer/sbus in Radiomaster ? Is any was to do this without a external module and using a sbus reciber in RM back pins? Thanks in advance and sorry for my low English level .
I like this video. I've been trying to set this up for months with my T16 and a Flysky FS-I6X (my daughter is interested in getting into the hobby and its a great size for her small hands). However, I still cant seem to get them to bind together fully. The T16 is set to FS2A_RX and Receiver 0. When I bind the T16 seems happy, however the FS-i6X keeps showing "RX Binding..." and never seems to fully bind (this happens regardless of PPM/PWM, iBus/SBUS settings in the FS-I6X).
Would it be possible for you to try this with the Flysky protocol?
If I get another FlySky radio in I'll give it a go. OpenTX 2.3.8 seems to have some improvements with this stuff from what I can see and it helped here to upgrade the multi-protocol module to the latest version of the firmware too.. Best of luck!
I have not tried this myself, but some flysky receivers do not actually send anything back to the radio, so it doesn't know if it is actually bound. With these, after a few seconds, you press cancel, it takes you back to the home screen and the receiver is bound. Maybe it is the same with the multi module.
Any luck? I basically have the same situation, kid wants to get into the hobby and the FS-i6 is around and has the right size. It works perfectly with a Taranis with the FRSKY protocols, no luck with the FlySky protocol though.
have you managed to get it sorted out ? i would love to use this feature
Looks like they have finally acknowledged a bug with the Flysky trainer mode in the multi protocol module software. Hopefully, they will sort it out for next release
github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases
github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/500
Just curious, How do you keep the bind on the plane???? every time I bind to the Frsky radio it in turn unbinds to the plane. So how do you bind it to both?
You don't bind to both. One module is bound to the 'plane as normal and the other 4in1 is bound to the other radio...
Nice video again, i love to see them, can you tell me if a mono cable works on a TX16S i want to use it for my DIY HT........
Keep up the good work, learn so much from you👍👍
hi nice to c u , i want ask you. the master radio must have maste/mutil model and it can be work. i use nv14+4in1 x9lite+4in1, they can not be work, can you help me??
Are you using the latest Opentx?
Dear Lee! I have qx7 and R9 module. Would it work if I set the D16 as internal for wireless training and R9 as external? Thx!
Maybe, I've not tried it. The wireless trainer stuff is a funky function of the 4in1 MPM module so not sure if the standard radio that can't emulate an FrSky receiver can do that...
@@Painless360 Thx! You have contact to tech people, clould you ask them if is it possible to change the internal xjt module in Qx7,to a multi module? Thx!
I dont think that you can. Best of luck
@@Painless360 thx!
hey hopefully you can help me out. wanted to use this feature with the wt01 to work wireless with my goggles head tracker port. I have a 4-1 zorro radio internal with crossfire module, can I bind to the wt01 and put it on my goggle to send trainer channels for headtracking, while also using crossfire? sound like it should work.
I'm not sure how that would work, let me know if you get it working... best of luck
Hi everyone. A couple of years ago I bought a furibee darkmax 220 with what seems to me to be a frsky fd800 any ideas how to bind this with my radiomaster and or mastefire module? I have tried frsky d16 d8 and d8 clone modes and I can't seem to get them to come up on betaflight. I do how ever see my green light turn solid when I bind and solid when I green when I reboot my quad. once I plug in to beta flight tho I get a signal rx flag.
Hi Lee, Hope all is well.Have you connect tx16s with the xjt module to a flysky FS16x. Or to the R168 rx. I tried many time following the XJT document with no success. Now if you took several hrs with the Radiomaster folks I think I am sol. as I have none of your expertise I really thought connecting the R168 to the module would be click, click and done. grrr nope. I can connect the R168 to the internal module very easy and quick. any suggestions. Thanks in advance .
Jeff
If you are talking about the Frsky XJT module, that is an Frsky product so will only talk to Frsky recievers not Flysky. There are several options for Frsky too and you need to select the right one. Check out my video showing the to bind stuff using the internal multiprotocol module.. best of luck
@@Painless360 Thanks Lee I will check out your video. I was under the impression the Radiomaster R168 acted same as a frsky rx. and yes it is a frsky XJT module so I thought the R168 should connect easly to the XJT module. I was trying to set up a trainer system using my TX16s and a FLYSKY FSi6x with Radiomaster R168 RX but sounds like the Module will not connect to the R168.and the internal module will not connect the FLSKY tx wirelessly. Darn.
ruclips.net/video/6dpkkkezQsk/видео.html
@@Painless360 Yes I had watched that video before and it helped me before with originally binding my TX16S to my FS-1A10b rx and to the R168 rx. but now I am trying to use the external module FRSKY XJT to connect to the R168 but I guess that may not be an option and can only connect to it with the internal module.
The. Module and the RX probably have different regional firmware. Best of luck
Hi Lee. Very good idea. I have a Horus and X-Lite Pro and Master/Multi is not an option. I am running the latest OpenTX and Multi Protocol Firmware?
I've not got a Horus here to try but the module support has been part of Opentx generally for sometime..
Painless360 how strange. However. I did get the BT trainer link working. That’s never worked so bonus anyways mate.
The Horus is going. I had the TX16S for my Birthday. I am so happy with it. Even bound it to my WLToys V911S and V950. Very happy. Thanks for all the great tips.
Can you please make a video on how to get headtracker to work wit this radio, i use the tx16s and full crossfire.
I can not wrap my head around it🙄
Thanks in advance
Same way as any other Opentx radio. See my videos on it.. Best of luck
@@Painless360 so the tracker cable from the taranis also works on the TX16S Trainer port?
Hi. Thanks alot for your really great channel. I should get my new Radiomaster TX16s in the mail today, and I'd like to know if it's possible to use a multi-protocol 4in1 STM32 module (you made a video about it 2-3 years ago) as a trainer module and use one of my old Futaba transmitters as slave TX ? Regards.
Possibly. Best of luck!
Very cool. I just wish I had someone to train me. I'm older and just getting into quads, and not having such a great experience in Velocidrone. It's only been one day though. *lol* Thanks for the video.
Check out my 'Introduction to..' and '..for beginners' playlists for all of the basics covered simply.. Best of luck
Ahh, i was hoping you could do it without an extra module like on my Graupner.
This radio is a LOT cheaper than your Graupner... Happy flying
If I have my model using a spektrum receiver can someone with a FR sky transmitter (Taranis)fly my quad through my controller using this method?
If I understand the question, no. Happy flying
congratulation on you getting your hand on the radiomaster t16s transmitter , anyway will this transmitter bind to a blade 150 s helicopter.
I was one of a dozen reviewers. What radio protocol does that model need?
Hope you can help me. I have jumper t16 pro v2 setup to kopilot I'm using mode 2 AETR. The motor will only start when over
half way up on throdle. any sugestions?
I watch just about all of your videos.
All I know about the setup of the Kopilot is in the series I made for it...Check what mode you're in and if the ESC i calibrated and connected propertly. I hope those videos showing how I set it up helps.. Best of luck
Hi I’m James, congrats on your videos very informative and to the point. I need a bit of help with connecting witless trainer with my TX16S, can you please advise how I set up trainer mode with FlyskyFSi6 transmitter with radio master TX16S as the trainer transmitter. I set up trainer mode on the TX16S but I don’t know what protocol I need to select for the fsi6 transmitter?
Not sure, I don't have one of those radios here and I've even downloaded and looked at the manual and still no clue. Best of luck with it
Just one question with this module, there is an option to fine tune for each make of receiver. How can you store that if the transmitter is turned off? Thank you
I'm not sure I understand what you're asking. Can you elaborate?
I understand there is a config file which will store any changes to the fine frequency tune. Only problem is that I'm unable to find it
How many channels can the trainer radio be assigned to? Just AETR or can the student also use switches?
Lots, see the trainer video linked in description... Best of luck
Is that mess caused by radiomaster or the open tx changes and improvements ?
it looks easy - if you have that receipe you had developed with Radiomaster "Ben"
I have ordered mine ... and hope to get it soon and running quickly cause I have to move the whole Jumper T16 fleet of receivers to the radiomaster which I had done just3 months ago coming from the X9D to Jumper T16 Pro Hall Gimbal to.
It's not a mess just very poorly documented by the Multiprorocol and Opentx teams.. Hence this video. Happy flying
Do you know if the same hall gimbals used to mod the old taes is x9d will fit the tx16s? They look the same but could be different connectors I suppose. Seeing as the non hall model is in stock and I mod ed my old semi broken x9d i could just move them over.
No idea sorry. If they do, let me know.
amazing. Thank you Lee.
Is it possible to do that on a taranis x9d+? Internal module to trainer d8 and using ext R9m to control the model?
Ps, what module are you using?
Should be with the right versions.. (Jumper JP4IN1)
Does this work binding spektrum to radiomaster
See note in description. Happy flying
Can you use this to set up a wireless PC link for simulators?
I've not tried - maybe. Let me know if you get it working! :D
What is your 4-in-1 module? Where can I purchase one? Thanks!
This one came with my original Jumper T16 but you can buy it separately..
Is the Master/Multi option only on Jumper OpenTx because I have 2.3.7 on my Horus and its not there?
Did you select multiprotocol support in OpenTX when you updated it? It'll need that to have all of those extra pieces..
@@Painless360 Hi Lee, I remember when I updated to 2.2.4 I selected the multi option but in 2.3.7 I cant see it - I've just looked at companion after reading you reply and I still cant see multi protocol support
I wonder if they've added it as standard now then.. Just checked the firmware and it's now included as standard. I wonder if it's just the X10?
@@Painless360 Don't know I only updated to 2.3.7 about 3 weeks ago
pa I can select multi when using an external module
i have a Horus and there is no trainer master/multi option. What do i have to do?
Update Opentx..
@@Painless360 i did. doi have to update the multiprotocol also?
I had to update my Multiprorocol module to the version shown..
Please see my pinned comment. Very dissapointed...
@@Painless360 Thank you! I liked FrSky a lot, but they keep on disapointing with their strange decisions...
Awesome video love the way you clearly explain things. you’re videos are my go to when I’m trying to figure something out.thank you. So I have a question. I’ve always wanted to hook up a PC gaming joystick to an RC radio but haven’t found a simple or inexpensive way to do it. Would this more advanced radio Perhaps provide a way to do that?
Most that have a USB post support that and the driver in Windows should be loaded automatically. See my videos on setting up a PC joystick...
?sir will this work on a jumper t16 pro
Should do..
@@Painless360 thanks sir
Hi nice video, thanks a lot.
by the way, I have extra unit of Internal 4-in-1 RadioMaster module .. can this internet module unit able to *plug* to the external module socket ?
If possible, I shall be able to use this way to have both internal & external 4-in-1 module, and setup the wireless trainer ?
Very much appreciate, if anyone can advise
Maybe, depends on the unit. Best of luck!
Your Haunted Mansion collection is awesome! We're you an employee there or just a fan ?
Thanks! :D Favourite ride and I've been collecting for years... 'Don't forget to bring your death certificate!' :D
Yes mine too !
You obviously have fantastic taste ;) :D
thanks.
👍👍