Hi, I could have sworn I put links in for the connectors but I couldn’t find them either. I’ll upload the links to Amazon tomorrow for you. Thanks for watching 👍
Good stuff! Can you tell me where to buy the white plastic air bleed valve as a separate item? I can only seem to find it as a kit with the brass spigot.
Hi, when I bought one it was a separate unit but later when I checked, unfortunately, you do need to buy the spigot as well which is really expensive. The part number in 2017 was WJN500110 but now seems to incorporate the spigot . In 2017 it cost £15 for the plastic bit. Times have changed!! Thanks for watching 👍🏽
What are the two smaller plastic connectors for in the picture? There are two big ones with the sides that you press, but I've no idea about the two other pieces.
Hi, not to sure what parts you are on about. The head has 4 brass spigots that fuel lines slide onto. On the outside they are the same size. Can you explain a little more about the bits you speak about?
@@MikeMakesIt at 6:48 you put a picture into the video, which has the two female connectors, a straight one and a right angle one, but also two straight spigots with an O ring on.
Ah those. They are connectors for the fuel pipe ends in case I broke any. In the video I mention my original connectors didn’t clip on very well so bought them just in case. I did’t need them in the end. They come as a two piece set although if I used them I would be able to chuck away one end as this is replaced by the brass spigot in the fuel head.
Well executed Mike, but where did you get the plastic pipe connectors from?
Hi, I could have sworn I put links in for the connectors but I couldn’t find them either. I’ll upload the links to Amazon tomorrow for you. Thanks for watching 👍
1 right angle, 1 straight connectors on Amazon amzn.to/3Zq60qJ or pack of 2 straight connectors amzn.to/4eYV3ku
Great videos u are making man thanks a hole heap
Thanks for the great feedback, and of course for watching 👍🏽
Good stuff! Can you tell me where to buy the white plastic air bleed valve as a separate item? I can only seem to find it as a kit with the brass spigot.
Hi, when I bought one it was a separate unit but later when I checked, unfortunately, you do need to buy the spigot as well which is really expensive. The part number in 2017 was WJN500110 but now seems to incorporate the spigot . In 2017 it cost £15 for the plastic bit. Times have changed!! Thanks for watching 👍🏽
@@MikeMakesIt Thank you
What are the two smaller plastic connectors for in the picture? There are two big ones with the sides that you press, but I've no idea about the two other pieces.
Hi, not to sure what parts you are on about. The head has 4 brass spigots that fuel lines slide onto. On the outside they are the same size. Can you explain a little more about the bits you speak about?
@@MikeMakesIt at 6:48 you put a picture into the video, which has the two female connectors, a straight one and a right angle one, but also two straight spigots with an O ring on.
Ah those. They are connectors for the fuel pipe ends in case I broke any. In the video I mention my original connectors didn’t clip on very well so bought them just in case. I did’t need them in the end. They come as a two piece set although if I used them I would be able to chuck away one end as this is replaced by the brass spigot in the fuel head.
@@MikeMakesIt did you fit the straight connectors into all the pipes ok?
@@steenjinks7359 no, didn’t change any, just used the originals. Apparently they are a bit of a pig to swap into the fuel lines.
Excellent video!
Glad you liked it! Thanks for the feedback and for watching 👍🏽
Ahh. That's pretty conclusive.
And expensive. Done now though. Thanks for watching👍🏽