I Ordered a led light for a 2007 yz450f but it where should the red and black wire be when I ordered it it didn't show the red n black I just seen a plug in playtypething I thought
Been wanting to do my 2009 kxf but it looks like im going to have to fit a battery into my airbox and charge it every time 😞 not sure my bike makes 12v anywhere
@c4r5on88 ok i will use a RC-Batterie 12V. I will buidl the same setup as im the video. Maybe i can hide the batterie behind the numberplate. Otherwise in the airbox. Thanks for your idea for the small batterie!
I’m gonna add a light to my kids xr200r. LED’s need dc. You have to run a regulator rectifier to change the ac current from the bike to dc current. The led is only getting powered like a pulse from the ac so you don’t see it but it’s constantly flickering really fast. At least I think that’s what I’ve researched.
I ran mine to my launch control switch but you can run it to any wire that has power while the bike is running. If you have a volt meter, just start the bike and start touching wires to see which one has 12v.
Genius. I have a ride engineering bar clamp and was going to have to buy a different lightbar. You the man
You can put a straight wire for power and put the switch on the ground wire so you dont risk shorting the power on the switch..nice video...
I Ordered a led light for a 2007 yz450f but it where should the red and black wire be when I ordered it it didn't show the red n black I just seen a plug in playtypething I thought
Cheers for the vid I just bought a klx450 and need a light
I dont have a launch control, can you do it any other way?
I have a 2stroke 1995 should it work??
Been wanting to do my 2009 kxf but it looks like im going to have to fit a battery into my airbox and charge it every time 😞 not sure my bike makes 12v anywhere
It does, just get a test light and start checking wires
@brettbriggs13 I'd better dig it out I do have one of those light up pen things somewhere :)
@@c4r5on88same on my 2007 kxf. Did you find the +12V cable?
@sebastianschneider7406 no but I run a drill battery 😂 full charge lasts over 24 hours so it's decent
@c4r5on88 ok i will use a RC-Batterie 12V.
I will buidl the same setup as im the video.
Maybe i can hide the batterie behind the numberplate. Otherwise in the airbox.
Thanks for your idea for the small batterie!
Possible on 70cc Honda with kickstart ?
Hello. Can i do the same on 2000 yamaha yz450f ?
How would u do it on a rm125 as don't think you be able to connect it up to the kill switch
does this cause any damage to the ECU?
I think for all the trouble you went thru .. might as well gotten higher quality light
It would of been the same with a more expensive one
Those lights aren’t that bad for what they are
it still better than nothing. the light can be upgrade any time.
@@14bqdonkyes 👍🇦🇺
And how to do it WITHOUT a battery or launch control?
Hey is this uniersal to honda 150s?
Mine worked but when I ride my light broke down and now it works but very very very light how can I fix this
You probably shorted the led’s you probably need a resistor somewhere in your cables. Just an relatively informed guess tho. Lol
Where black wire goes? Ground?
This is epic
Duse your lunch control button still work with that wired into its system???
He took the feed wire ofc it does
thank you so much
Why this doesn't work so nice on my no battery honda xr400?the led is working but no so bright
I’m not sure, maybe your stater isn’t putting out 12v or maybe you don’t have a good connection
I’m gonna add a light to my kids xr200r. LED’s need dc. You have to run a regulator rectifier to change the ac current from the bike to dc current. The led is only getting powered like a pulse from the ac so you don’t see it but it’s constantly flickering really fast. At least I think that’s what I’ve researched.
Is it possible for to do on a rm85😊
Yes!
were does that red wire go to?
I ran mine to my launch control switch but you can run it to any wire that has power while the bike is running. If you have a volt meter, just start the bike and start touching wires to see which one has 12v.
brother how many watts does it have or how many lumens does this produce? thanx
12 Watts 1050 Lumens
Does launch control still work ? And did it effect anything with stator after a while ?
Still works and nothing effected
@@brettbriggs13If i wanted to this on an older bike that does not have lunch control to what should i connect to?
Where did u get that at
Harbor freight
On killswitch works?
I don’t understand your comment but everything works
He is asking if you could tap into the kill switch wires for power.
@@dustinhopper7656 that I’m not sure. If you have a voltmeter I guess you could see if it has 12v while running