Thanks! & I’m pretty sure they came included in the packaging with the light bar ! I had to bend them certain ways to get them to work but it’s solid not going anywhere.
I love this! I have a 22’ kx250x I would love to have the same setup or at least just the light bar. How is it mounted or connected to the handle bars?
@@450_mick8 Couod you recommended a battery for doing something like this? I have a yx 140 on my pit wanting to put lights, I’m hoping to find a way to do it off the stator w/ a battery and just have the stator maintain the bat. Do you think that’s possible?
Stator probably isn’t strong enough to support a light on a pit bike but you can grab a small battery at any local hardware store or parts store for prob 50-60 bucks and it will do fine .. just have to charge it every now and then .
Hey I have a Kx 450 and I'm trying to do the same thing I'm putting it between that capacitor and the clip and my bike keeps dying but I'm grounding it out to the frame are you supposed to ground it out on that wire because I just ran the hot off the orange
When mine was doing that I just had the wires backwards , you have to splice into the wires right pass the clip sounds like your splicing into the wrong spot , your ground should be one of the wires not on the frame just to keep things clean
@@450_mick8 thanks bro I installed on my rmz250, works well but tail light LED won’t stay on the plastic when I stick it on so u seem to have black plastic mounted on back fender and then the tail LED light, can u paste the link?
Yes sir I just used Velcro on the bike plastics but I also used gorilla glue just to hold it on even better . www.amazon.com/dp/B08P3MXLLD/ref=cm_sw_r_cp_api_i_KTEN1SM4R1M23Y5A3HE3
@@450_mick8 is this everything you needed in that link? also, do you need these lights for register or do you only need flashing lights to register a 450?
![Dirt Bike Lights Using Cordless Tool Battery [How To] Updated video!](http://i.ytimg.com/vi/ZyBoxAlFte8/mqdefault.jpg)
![Dirt Bike Lights Using Cordless Tool Battery [How To] Updated video!](/img/tr.png)
Milwaukee 18v battery in the airbox works the best last forever
Beautiful bikes
This was helpful. Trying to make my 250 street legal
Hey sweet setup, where did you get the bar mounts for the light bar?
Thanks! & I’m pretty sure they came included in the packaging with the light bar ! I had to bend them certain ways to get them to work but it’s solid not going anywhere.
Good vid bro and nice bike! Im about to do this on my RMZ 250 2018
Thanks man ! Let me know how it goes !
Did you end up doing it on the 250?
How did it go?
Can you make a video on how to connect them exactly
That brake light is perfect, where did you get both lights?
I got them both on Amazon ! Link for both of the lights is in the description . Thanks for watching!
Where did you connect the wires from the brake light ?
They go to a hydraulic switch on either the back brake or front your choice.
Is this bike fuel injected? I thought I saw you reach for a choke and my bike has a carb
Yes it’s fuel injected and it does have a choke
how did you mount it to the bars?
I love this! I have a 22’ kx250x I would love to have the same setup or at least just the light bar. How is it mounted or connected to the handle bars?
I used the metal that come with the lights and bent them to fit into a couple bolts/screws on my handlebars!
Hey this is awesome, the question I have is will this work on the 2023 rmz450?
Cause I wanna make it street legal.
Thanx
Yes I believe so because newer bikes have fuel injection so they use a capacitor
You need a rectifier for the lights to work decently on the older bike.
Mine worked fine never had issues no dimming or flickering and it was the stock stator
Saludos. Puedes hacer vídeo de donde sacaste la conexión del faro dé luz 💡
Does your brake light just stay on or does it get brighter when you brake with hand or foot?
Have it on a hydraulic switch on front brake
I have a 19 rmz lottwork had me tie into the rectifier
Hard to tell.. are you tapping into the orange and black/white wires?
No it will die if you do that, there’s a connector right after the orange, and black and white wire . That’s where you tap in at
If it haven't light coil. Ho can we put on headlight ...??
5v or 12v ?
That’s nice bro but be careful I messed up banshee electrical system , if anything get a high voltage stater
Been running it like this for nearly a year no problems at all I ride it daily too
@@450_mick8 nice bike/ nice set up bro
hey boss did you find a way to hook the light up to your buddy’s bike?
No sir probably will have to get a bigger stator for his , have it on a battery right now for him .
@@450_mick8 Couod you recommended a battery for doing something like this? I have a yx 140 on my pit wanting to put lights, I’m hoping to find a way to do it off the stator w/ a battery and just have the stator maintain the bat. Do you think that’s possible?
Stator probably isn’t strong enough to support a light on a pit bike but you can grab a small battery at any local hardware store or parts store for prob 50-60 bucks and it will do fine .. just have to charge it every now and then .
Did you ever do your buddys 02 bike
No sir he needed a bigger stator it died every time
Do you have close up pics of how the lights are mounted?
Yes you will have to email me or Dm on Instagram
@@450_mick8 cool appreciate it, whats your email?
kmickens69@gmail.com
Hey I have a Kx 450 and I'm trying to do the same thing I'm putting it between that capacitor and the clip and my bike keeps dying but I'm grounding it out to the frame are you supposed to ground it out on that wire because I just ran the hot off the orange
When mine was doing that I just had the wires backwards , you have to splice into the wires right pass the clip sounds like your splicing into the wrong spot , your ground should be one of the wires not on the frame just to keep things clean
Where did u get the tail light holder ?
It’s just Velcro like 10 bucks on Amazon
@@450_mick8 thanks bro I installed on my rmz250, works well but tail light LED won’t stay on the plastic when I stick it on so u seem to have black plastic mounted on back fender and then the tail LED light, can u paste the link?
Yes sir I just used Velcro on the bike plastics but I also used gorilla glue just to hold it on even better . www.amazon.com/dp/B08P3MXLLD/ref=cm_sw_r_cp_api_i_KTEN1SM4R1M23Y5A3HE3
Would this work on a 2016 crf250r
Yes it should work on any fuel injected bike
I can’t get mines to work it’s a 2016 rmz 450 it dies every time I turn the switch on
Add me on Snapchat I can send more pics and try to help
Mine did that at first I just switched the wires I was tapping into and that fixed it
Think you forgot to put the link to the wire harness, i dont see it.
amzn.to/33RMF7J
@@450_mick8 is this everything you needed in that link? also, do you need these lights for register or do you only need flashing lights to register a 450?
Could I get some help on mine homie
Yes sir you sure can what you need help with man ?
Worst how to
You got ig or sum ? To ask questions if it doesn’t want to work ?
450_Mick