Yey someone made a Bakki river and a very nice job as well. I would recommend having a way to purge it I would say the best way is to put a drain in the last tank at the lowest point so you can keep the pump on and flush out any dirt that gets stuck in the bottom of the Siporax also buy more Siporax or leave the last chamber empty. Adam
Hi Adam, thank you. I have been looking at some way of cleaning the boxes and am still working on it. I did order more Siporax this afternoon, but don't tell my missus lol. Thanks again mate. Terry.
Hi mate, thank you, and no problem. I do have a newer version of the bakki river if your interested. Here are the 2 videos of the build and install. ruclips.net/video/Jk4enLVcYTI/видео.html ruclips.net/video/9bWfmeqek4A/видео.html Hope this helps mate, Terry.
@@Wrighty perfect ill get watching and see what i can come up with, ive only got a small space round the back of my pond its 8ft long but only just over a foot wide so want to try to add some sort of system that i only needs very little maintenance 👍🐟👌
Your new intro is looking good mate. Glad you got your pc problems sorted. Looking forward to seeing the finish bakki next time. Keep up the good work.
Siporax hey, have you been watching Adam Julyan's video's Wrighty hehe. I have siporax in my bakki shower, expensive but good and like you when I ordered mine and it turned up and I thought 'Oh is that it' lol. Bring back the old music, the misses is still saying it was the best.
I've suffered with nitrate in the pond all this season and it's driven me crazy, so I'm going for it with the river. I had 25 ltr for a start and have just had to order another 20 ltr. Those bloody boxes are bigger than they look lol. Tell the wife I'll do my best 😉 Thanks mate, Terry
Hi Terry, fingers crossed you are still on the mend. I hope you don’t mind me asking, is the weir critical or would it be possible to simply place the last exit pipe higher up the end box to determine the final level going through the Siporax? I haven’t any plastic welding gear as yet and will add a weir if necessary, Homebase have stopped selling the boxes too, so I have ended up using some of their larger boxes and more Siporax so hopefully will still end up OK and I get the throughflow I need. Kind Regards, Richard
Hi Richard, I'm very well thank you mate. Pretty much back to normal. I welded my weir with a soldering iron and used cable ties for welding rods. As long as there all the same plastic it will work. I didn't have plastic welding equipment at the time. You could make the outlet higher, just make sure the siporax can't get into the outlet. Take care mate, Terry.
Hi Mate, If you mean the pipe fittings try here www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2057872.m570.l1311.R7.TR12.TRC2.A0.H1.Xsolvent+weld.TRS0&_nkw=solvent+weld+pipe+fittings&_sacat=0 Terry.
Hope you liked it mate. Took ages to get this new computer sorted. But wow! is it quick. 5 minutes to render a 1 gig video. My old one took 30 minutes at least. Thanks mate, Terry.
Hi Mate, Cracking Video like the new split screen opening scene nice touch, another tidy build as always your fish must be in heaven:) if you have any IT related issues Bud drop me a private email im a IT tech Takecare Bud keep em coming
Hi Kev, thanks mate, and thanks for the offer. That's very much appreciated. I'm ok with water but computers as you can tell drive me mental lol. Thanks again mate, Terry.
Yey someone made a Bakki river and a very nice job as well. I would recommend having a way to purge it I would say the best way is to put a drain in the last tank at the lowest point so you can keep the pump on and flush out any dirt that gets stuck in the bottom of the Siporax also buy more Siporax or leave the last chamber empty.
Adam
Hi Adam, thank you. I have been looking at some way of cleaning the boxes and am still working on it. I did order more Siporax this afternoon, but don't tell my missus lol. Thanks again mate. Terry.
New intro, new computer, new addition to the pond set up, all good Terry. Great work, always a pleasure watching your work 👍
Thanks mate, computers been a bit of a nightmare, but hoping I've got it sorted now. Terry.
YES. Been waiting for this upcoming video for a couple of weeks. Nice work as always Wrighty.
Thanks Chris, it's appreciated mate. The next one shouldn't be too long now the computers working lol. Terry.
Awsome thanks for sharing this, i hope you dont mind im going pinch this idea 👍🐟👌
Hi mate, thank you, and no problem. I do have a newer version of the bakki river if your interested. Here are the 2 videos of the build and install.
ruclips.net/video/Jk4enLVcYTI/видео.html
ruclips.net/video/9bWfmeqek4A/видео.html
Hope this helps mate, Terry.
@@Wrighty perfect ill get watching and see what i can come up with, ive only got a small space round the back of my pond its 8ft long but only just over a foot wide so want to try to add some sort of system that i only needs very little maintenance 👍🐟👌
Great video as always. Thanks for the tips and tricks. Think i may add a bakki river to my new pond. Keep up the videos and keep ponding
Hi, and thank you. If your not having plants in the pond I think there a must. Terry.
I enjoyed watching this project!
Thanks mate. Glad you enjoyed it. Thank you for your support, Terry.
Your new intro is looking good mate. Glad you got your pc problems sorted. Looking forward to seeing the finish bakki next time. Keep up the good work.
Agreed I like the new one :)
Siporax hey, have you been watching Adam Julyan's video's Wrighty hehe. I have siporax in my bakki shower, expensive but good and like you when I ordered mine and it turned up and I thought 'Oh is that it' lol.
Bring back the old music, the misses is still saying it was the best.
I've suffered with nitrate in the pond all this season and it's driven me crazy, so I'm going for it with the river. I had 25 ltr for a start and have just had to order another 20 ltr. Those bloody boxes are bigger than they look lol. Tell the wife I'll do my best 😉 Thanks mate, Terry
Enjoyed watching buddy as always jezza
Hi Jez, Thanks mate. Always appreciated. Terry.
Fantastic vid once again
Thanks mate, very much appreciated. Terry.
Another project and another video -just like we like it:-)
Thanks Martin. I do my best 😊 Terry.
Great video mate. Whens the finished one going to be uploaded. Looking forward to see it all running.
Hi Steve, I'm hoping to have it up and running this week. It's all done, Just waiting for the new pump to arrive. Terry.
i just love all ur video's, wish i had all ur know how and time, hope you dont drive the wife crazy.....lol...happy ponding!!!
Hi Deb, thank you, very much appreciated. I think she's glad I'm out the way and not under her feet lol. Terry
Nice video! Looks like you have plenty of filtration on the pond!! :-)
Hi Andrew, Thank you. I do like to try everything 😊 Terry.
Hi Terry, fingers crossed you are still on the mend. I hope you don’t mind me asking, is the weir critical or would it be possible to simply place the last exit pipe higher up the end box to determine the final level going through the Siporax? I haven’t any plastic welding gear as yet and will add a weir if necessary, Homebase have stopped selling the boxes too, so I have ended up using some of their larger boxes and more Siporax so hopefully will still end up OK and I get the throughflow I need. Kind Regards, Richard
Hi Richard, I'm very well thank you mate. Pretty much back to normal. I welded my weir with a soldering iron and used cable ties for welding rods. As long as there all the same plastic it will work. I didn't have plastic welding equipment at the time. You could make the outlet higher, just make sure the siporax can't get into the outlet. Take care mate, Terry.
Where do you get all these pumping and accessories? Homebase or Woodies don't have any of this stuff
Hi Mate, If you mean the pipe fittings try here
www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2057872.m570.l1311.R7.TR12.TRC2.A0.H1.Xsolvent+weld.TRS0&_nkw=solvent+weld+pipe+fittings&_sacat=0
Terry.
Wrighty Ah thanks! Great link, project time :)
Yeah a new Wrighty video and intro, bring it on :)
Hope you liked it mate. Took ages to get this new computer sorted. But wow! is it quick. 5 minutes to render a 1 gig video. My old one took 30 minutes at least. Thanks mate, Terry.
lol nice glad you're happy with it mate, no excuses now for no new videos, I'll be expecting em all through the winter and into spring :D
That's not a problem, as long as you don't mind a 15 minute video of me sat there twiddling my thumbs lol. Terry.
👍
Great stuff as usual buddy! You on any Facebook pages or groups? Wouldn't mind having a word or 2 with you!
Hi Dean, Thank you. You can join my forum on my website diypondfilter.com/forum or email me pondfilters@gmail.com Thanks, Terry.
bakki river better then bakki shower ? is because all the biome is submerge ?
Hi Joseph, A bakki rive is more for nitrates as it produces the anoxic (anaerobic) bacteria. Terry.
Where do you get your 2" Bulkhead fittings?
Hi Colin, I get them here: www.absolute-koi.com/subcat290.html Terry.
Nearly there with the next vid?
Hi John, Up-loading. Terry.
Next vid on the Bakki?
Hi John, Yes, I'm hoping the next vid will see the bakki up and running. Keeping my fingers crossed. Terry.
Any idea when I'm half way through mine
I'm hoping to have it done this next week. Getting a new pump so waiting for that. Everything else is just about ready. Terry.
Brill can't wait
Very well done! Thanks for sharing. You may enjoy my koi unboxing video featuring a discussion of butterfly koi origination. New subscriber.
Thank you. Your very welcome. I will take a look. Terry.
Hi Mate, Cracking Video like the new split screen opening scene nice touch, another tidy build as always your fish must be in heaven:) if you have any IT related issues Bud drop me a private email im a IT tech
Takecare Bud keep em coming
Hi Kev, thanks mate, and thanks for the offer. That's very much appreciated. I'm ok with water but computers as you can tell drive me mental lol. Thanks again mate, Terry.
Go back to the old intro.
here here lol (on behalf of the misses. the old old intro)