I have installed many of these (in that size), always wondered how these are put together. Same size bearings are used in paper mill for huge rollers where paper goes trough.
I'll give it to ya, I thought you were gonna blue ball us with those last four bearings. However, the clip finished! For that you get this bit of saucy engagement. Very well done.
@@toaster_gmbh Spherical bearings aren't synonymous with round bearings. The outer race is spherical, and the rollers are barrel shaped, allowing the unique assembly and ability for the bearing to handle loads that deviate from 90 degrees. This item is a "Spherical Roller Bearing."
I'd love to see how they measure and substitute rollers to fit in perfect balance of roundness when the bearing spins. I saw that once and it's pure maestry.
@@3jasom Plastic is less expensive than bronze. Depends on the needs of the overall system/machine using the bearing. Bicycle bearings use steel cages.
@@AmazingChinaToday i have another question. If i look in bearing for exaple 6310 C4 from some hight rpm eletric motor there is plastic cage. Is it here some different in performance? Steel vs plastic.
Sieht echt cool ais, aber warum nimmt man Rollen und keine Kugeln? Oder wenn es um die Auflagefläche geht, warum nimmt man Rollen nebeneinander und nicht eine längere Rolle, so wie bei Rillenlagern? Oder geht es um das Nachträgliche auseinander nehmen um neue frische Rollen einzusetzen?😊
All the work that Americans used to do is in china now while Americans have become service industry. The US government has sold us out. Thank a representative and senator for that!
Bingo. Now you know why this channel exists. 400 videos posted so far. Also, China is not our "enemy" by any stretch of the imagination. We have been lied to for years. China simply puts China first, something we used to do decades ago, and I can't fault them for that.
Sometimes, in nature, natural stone bearings for nobody's interest appears simple because the chance of emergence was more than none, the observer recorded the phenomena, and the phenomena was in just one of many ways interpreted. In such parallel, humanity is not ready to feel ashamed at how delayed it has developed according to the other shared-physics civilizations, like the Germans to the Japanese, or the Anglicans to the Native Americans, or the Arabs to the Iberians all after the fall of Rome.
We are from China and manufacture deep groove ball bearings and cylindrical roller bearings. From raw materials to finished products, all are processed and produced by ourselves. We sell various components and finished products of bearings. Friends from all over the world are welcomed to consult me.
@@bananenmensch4147 oh right that was the only metal parts there? I believe the inner race as well as the bearing itself is metal. I was talking about the cage and if you are familiar with bearing construction you would know it is quite common to use plastic bearing cages. Think twice before posting. Lmao
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Check out the video of a master artisan creating a teapot from clay, one of my favorite videos: ruclips.net/video/6rLgf_ys0vo/видео.html
Fords final attempt at making a reliable wheel bearing for an Explorer.
Explorer or Exploder?
P.S. I once had the Sport Trac "truck" version
@@mherrmann81687 poor you 😅
@@PhilQc109 well, when the repairs to a rear main seal costs as much as as the KBB... You just move on and try to learn from your mistakes. Lol
hahahahahha... im just change my ford ranger 3.2 MT 6speed bearing because china made bearing...
I felt this simply because my 04 explorer is parked due to rear wheel bearing failure and pats system failure
Thats the biggest roller bearing I've ever seen
It's Soo cute that made me want one....
That’s what she said
First thing I thought. Damn that’s a bigass bearing.
@@asahito2004 for what 💀
We make them big enough for a person to sit inside of
Finally homies done with my muffler bearing
💀
I have installed many of these (in that size), always wondered how these are put together. Same size bearings are used in paper mill for huge rollers where paper goes trough.
I was wondering what something that size was used for.
Danke, habe mich gefragt wofür man so grosse Lager braucht.
Yeah about the size of a dryer can bearing at our mill.
I'll give it to ya, I thought you were gonna blue ball us with those last four bearings. However, the clip finished! For that you get this bit of saucy engagement. Very well done.
You never band steel against a bearing always use a nylon mallet or lead hammer and you should oil all rollers prior to insertion
It's aluminum. The rollers are hardened steel, nothing is damaged.
You know nothing Karen
@@AmazingChinaToday what is aluminum??
@@garywoody5594 The metal rod used to position the hardened steel rollers is aluminum.
@@AmazingChinaToday Didn't sound like aluminum
suggestion: Put courtesy of or (company name) of where you got the footage so we can reach out to them. Great videos!!!😊
Wonderful to see! Spherical bearings are amazing
Esse rolamento é autocompensador,
O esférico usa bolas.
I personally like triangular bearings but rectangular ones are also awesome...
@@toaster_gmbh 😂
@@toaster_gmbh Spherical bearings aren't synonymous with round bearings. The outer race is spherical, and the rollers are barrel shaped, allowing the unique assembly and ability for the bearing to handle loads that deviate from 90 degrees. This item is a "Spherical Roller Bearing."
@@AmazingChinaToday i was just kidding...
Игорь Негода собирает подшипник на свой болид
На помпу для болида
На Ниву ступичные такие надо! Сносу не будет😊
Тип подшипника хороший
Согласен бро,работаю слесарем на заводе,это самые лучшие подшипники,в отличие от шариковых,которые мы заебались менять.Эти вечные.
Нива сносится подшипник будет жить
@@freeman8524 я об этом 👍😋
The one fidget spinner to rule them all 💀🔥
Spherical roller bearings are awesome.
That is one BIG roller bearing... Bet it ain't a front outer wheel bearing for a Yugo! L8R G8R. :-)
We are Chinese bearings factory，welcome tocontact us to purchase bearings😊
That looks expensive , Imagine if it was German.
The scale is what makes this an awesome build.
I'd love to see how they measure and substitute rollers to fit in perfect balance of roundness when the bearing spins. I saw that once and it's pure maestry.
Normal people : why this car or machine so expensive
Expert engineers: 😏
Wow this is just awesome!😂
Looks like Optimus prime‘s hip replacement
New subscriber....i love how China is surpassing the whole world !
Cheers from Patagonia, Argentina!
We need products with good quality
@@BIGDaddYfromVenuSHow is the quality of your Made in China iPhone?
Why is it that they appear to be doing great things in engineering then start slapping a metal bar against it. No rubber or nylon mallet?
The nylon mallet is visible on the table, the rollers are hardened steel, that aluminum rod won't damage anything.
@@AmazingChinaToday so use it? Its the fine details. Besides that nice work
@@Blandy929There is zero damage. This is a $60,000 USD bearing and is not damaged during assembly in any way.
Yes and why do they need smacking in anyway?
@@teamidris I don't know, maybe because it'll be impossible to fit them in by hand? Just use some logic
Optimus Prime's shoulder joint..?
😀✨✨✨
Wow.. that would take 10kg of grease. What's it for?
Wind turbines, ships, industrial equipment, etc
Thats going to be one bad ass fidget spinner,
Let’s beat the snot out of a precision ground part with a metal rod…
Aluminum rod, 800 pounds of hardened steel, zero damage...
I think they know what they’re doing better than you. Spewing bullshit
The bearings are huge 😮
Yes indeed, 800 pounds of hardened steel!
That's the biggest revolver iv ever seen. Very nice. Is that s.w?
Heh, cheeky bastard. I like your thoughts 😂
Unnnbelivable!!👍👍
I would have so much fun packing that up!!
Thing would prob take a whole bucket full
@@MrDarkside1355 Probably 2!
Here is the regular speed video: ruclips.net/video/zOe52nOFVII/видео.html
.
The world’s biggest fidget spinner
Блин, мне на сомокат такой подшипник нужен
Задний или передний 😅😅😅
Потом самокат разгонишь хрен остановишь. Придётся и тормоза от камаза.
На моноколесо😂
Сомов котать?
@@psholnah слонов может?
Спинер зачётный будет!
Класс, где такие подшипники используют?
Wind turbines, ships, industrial equipment, etc
Did he really tap on the rollers with a steel bar???
The rollers are hardened steel, those taps won't damage anything.
Aluminium bar
I dropped a inner race about that size on my leg the other day. Looks like I have a 3rd knee cap now.
Вот те на.А я этим занимался в Вгонном Депо.гКраснодар.Калоши делали.5ий подшипниковый завод.
Херачить металлом по плоскости это высшая квалификация.
Is this the self alignment kind of bearing?
This is a spherical roller bearing
These two rows of rollers sit in two jigs that ride next to each other WITHOUT any rollers of themselves?
Made from bronze, which is used in many bearing applications without balls or rollers. Search for "bronze sleeve bearing".
Us it plastic cage? Is it some polyamid stuff?
Bronze cage
@@AmazingChinaTodayi have other question. Is plastic cage matter of small size bearing? Or..
are big bearings only with metal cage?
@@3jasom Plastic is less expensive than bronze. Depends on the needs of the overall system/machine using the bearing. Bicycle bearings use steel cages.
And my same question was thought to be offensive. Lol
@@AmazingChinaToday i have another question. If i look in bearing for exaple 6310 C4 from some hight rpm eletric motor there is plastic cage. Is it here some different in performance? Steel vs plastic.
I wouldn't want to be the one that has to pack it with grease!
а нижние можно было тоже без волшебной палочки вставить?
The Damper need this!
The hand pushing at the end makes me think the beating with the bar at the beginning was unnecessary.
This bearing is 800 pounds, it's not as easy as it looks.
What material is the separator made of?
Bronze
Ampco
Those ale alot better replies than I got. Lol
Aren't they double row spherical bearing
Главное смазать не забудь . Хорошее видео .
Это вроде бы подшипник педали детского велосипеда.
It appears the rollers have a core, are the rollers made out of all the same material?
Yeah, forged in one piece but grounded to shape only on contact surface
Sieht echt cool ais, aber warum nimmt man Rollen und keine Kugeln? Oder wenn es um die Auflagefläche geht, warum nimmt man Rollen nebeneinander und nicht eine längere Rolle, so wie bei Rillenlagern? Oder geht es um das Nachträgliche auseinander nehmen um neue frische Rollen einzusetzen?😊
Huge roll bearing😮😅
i have pressed the fucking do not recommend this channel a fucking 100 times but still i see these videos
Because we love you, even though you choose to be ignorant.
@@AmazingChinaToday im not ignorant i just dont want to see this content and its youtubes fault that i see it
All the work that Americans used to do is in china now while Americans have become service industry. The US government has sold us out. Thank a representative and senator for that!
Bingo. Now you know why this channel exists. 400 videos posted so far. Also, China is not our "enemy" by any stretch of the imagination. We have been lied to for years. China simply puts China first, something we used to do decades ago, and I can't fault them for that.
Chinese are experts, very clever people and nice. 👍
😂
Then they deep freeze the whole thing and shrink it down to fit in fidget spinners!
Must be for mining.. reminds me of 229750j spherical bearings from SKF when I used to work there
Sometimes, in nature, natural stone bearings for nobody's interest appears simple because the chance of emergence was more than none, the observer recorded the phenomena, and the phenomena was in just one of many ways interpreted. In such parallel, humanity is not ready to feel ashamed at how delayed it has developed according to the other shared-physics civilizations, like the Germans to the Japanese, or the Anglicans to the Native Americans, or the Arabs to the Iberians all after the fall of Rome.
این چیه ؟ کارش چیه ؟ در کدام وسیله استفاده میشه ؟ معلومه باید بلبرینگ باشه اما طرز کارش چطوره ؟ 😮😮
中の黄色いのは取り外さず使うの？
Yes, the bearing cage stays, it keeps the rollers from touching
Ступичный подшипник с автомобиля))
The amazing part is at the end when they reveal that it was just a regular 608 bearing ^_^
You would need quite a large skateboard to run these bearings! 😄
They must be building Godzillas car 😅
How much does the Snap On version cost?
This one costs $60,000 so the SnapOn model costs $2 million.
비행기 엔진은? 안만들어? 우주선 쏘는게 신기! 😝😝😝😝😝😝😝😝😝
Why not use ceramic instead of metal for bearings
This bearing is already $60,000 USD, how much would a ceramic version cost?
We are from China and manufacture deep groove ball bearings and cylindrical roller bearings. From raw materials to finished products, all are processed and produced by ourselves. We sell various components and finished products of bearings. Friends from all over the world are welcomed to consult me.
Imagina o tamanho do carrinho de rolimã que dá para fazer com esse rolamento 😂
Carrinho de rolimã monstro, pra passar por cima dos outros carrinhos de rolimã.
Espectacular buen trabajo !!
Cool ❤
What are the equations of those curves?
E = mc²
it's look like he reloading granade laucher
Я разбирал подобный...пи...дил шарики, для Марбл машины😂😂😂.
I can imagine the price of this baby
About $60,000 USD
i don't know what it is for... but i need one
For those wondering this is a bearing for a carburetor
Yes, for a Tesla Model S 😁
That's for gundam knee joints..
Brand? It's interesting to see how this guy hits the rollers with a steel bar. Then the customer will wonder why they last half of a decent bearing.
The rollers are hardened steel, the rod is aluminum. This is an 800 pound $60,000 bearing and is completely undamaged during assembly.
😍😍😍😍😍
Is this the tiny man living in my revolver
I wanna see the shaft this goes on.😮
베어링 조립공정에 때리고 있네ㅋㅋ 게다가 저 장갑은 뭐냐ㅋ
I always thought the inner brass cage had to be 1 single peice
Two rows of bearings, two cages
Reloading grenade launcher! :3
👍👍👍👍👍🙏🤗
Now what's that baby cost I wonder!!!
About $60,000 USD
This would make a awesome rim for my car lol
Hope those aren't plastic roller guides
Since wheb does plastic make an metallic Sound when struck pls just think for a sec before posting smth
Bronze
@@bananenmensch4147 oh right that was the only metal parts there? I believe the inner race as well as the bearing itself is metal. I was talking about the cage and if you are familiar with bearing construction you would know it is quite common to use plastic bearing cages. Think twice before posting. Lmao
@@williamvaughan1218 He did think, and you didn't watch the video. Metallic sound from the cage, so not plastic.
@@JaakkoF so you think the metal to metal contact of the roller to the race makes no sound at all? Ohh ya my bad. You can go back to watching cnn now
where is grease? 😟
Grease is applied after assembly, there are also multiple grease ports on the outer race.
Must be a spindle bearing for a lawnmower. 😂😂
Ele bateu com uma barra de alumínio não danifica os roletes
How much for one?
Fly like a feather, stiff like a board.
that would tens of thousands
Yes, about $60,000 USD.
spero rispettasse una sequenza prestabilita per l'inserimento dei rulli, stabilita in base alle tolleranze di lavorazione degli anelli
Next 10 videos, handpack that thing full with grease.
🤣
What shaft kind that big
Wind turbines, ships, industrial machinery
Оцарапал все что есть, ресурс снизился на порядок!
Nothing is scratched, it's hardened steel
Nicks on end face of rollers and functional surface of rollers caused by metal tooling
Harganya bisa lebih dari 3000 U$D 😅 kamu pukul pakek bucket ekscavator aja gak bakalan sompel tu bearing