Traxxas X01 Parts on The Traxxas Hoss VXL | Hoss Light Kit Install RC Car
HTML-код
- Опубликовано: 30 сен 2024
- Seen in video:
Traxxas Hoss - bit.ly/31U4Pkl
Traxxas Hoss Light Kit - bit.ly/2NmGYGu
Parts List for X01 Axle Conversion:
TRA6454
TRA6453
TRA6869
TRA6455
TRA6439
TRA5117 x3
Join the “MSM Drivers Meeting” community! bit.ly/35jlZuR
Save money watching my vlog:
www.prolineracing.com - Proline Racing 10% off with coupon code “msmvlog”
www.tonyscoffee.com - My favorite race coffee Tony’s Carmelita 20% off with coupon code “marksantamaria”
rcbodyarmor.com/ - Save 10% with coupon code “MSM10”
Want RC tech support, giveaways, or help promoting? Check out my Patreon page:
/ marksantamaria
Best Beginner RC Car:
Slash - bit.ly/39TMvdu
Slash 4x4 - bit.ly/391JoRb
Slash 4x4 VXL - bit.ly/2VcoqdO
Best Beginner RC Race Cars:
Tekno SCT410 -
Tekno ET48.3 -
My Crawler Scale Rigs:
Traxxas TRX4 -
My Top Electric Bashers (Updated):
Traxxas E-Revo 2.0 - bit.ly/2twJfVV
Traxxas Hoss - bit.ly/31U4Pkl
Traxxas Slash 4x4 Ulitimate - bit.ly/2Xogh6j
Traxxas Maxx - bit.ly/2R0K0A7
Tekno MT410 - bit.ly/2XUWURu
Traxxas XMaxx 8S - bit.ly/2X6Liuu
Favorite Battery Chargers (Updated):
Spektrum S2100 - bit.ly/2EAiiWp
Prodigy 625 DUO Touch AC - bit.ly/37Ot9Fo
Traxxas EZ-Peak Live Dual - bit.ly/2SND9KT
IDST Dual Charger - amzn.to/3dTeKuG
IDST AA and AAA Charger - amzn.to/2VHTcdY
My Top 5 Nitro Bashers:
Traxxas Revo 3.3 - bit.ly/2yMF8qZ
Traxxas Jato 3.3 - bit.ly/3dStjyr
Traxxas T-Maxx 3.3 - bit.ly/2VFgBN7
Traxxas Nitro Rustler - bit.ly/2NRXJXc
Traxxas Nitro Slash - bit.ly/2NR0AzG
My Race Vehicles:
Tekno ET48.3 (Etruggy) -
Tekno EB48 2.0 (Ebuggy) - bit.ly/2uhtUsI
Tekno SCT410.3 (4wd Short Course Truck) -
Tekno NB48 2.0 (Nitro Buggy) -
Tekno NT48.3 (Nitro Truggy) - bit.ly/38u69gU
Tekno ET410 (10th Scale 4wd Truck) - bit.ly/2yAAHfG
Tekno EB410.2 (10th Scale 4wd Buggy) - bit.ly/2YIiFo6
My Race Gear:
Radio - bit.ly/2GMghET
Race servos - bit.ly/2yBiuif
Nitro Engine - bit.ly/38mIv5E
Tires - bit.ly/2YHJGpQ
Race Oils - ptrcracing.com/
Fuel - vpracingfuels....
Batteries - bit.ly/2KoMR0P
My Son’s Race Vehicles:
Tekno SCT410.3 -
Tekno EB48.4 - bit.ly/2GLnkOg
Best All Around Race Tires:
Buggy - bit.ly/2FPjKl6
Truggy - bit.ly/3a8Ln6E
SCT - bit.ly/2tYXh2k
4wd 10th Scale Truck - bit.ly/388NzJT
Favorite Lipo Batteries
Protek Lipos (Race Packs) - bit.ly/2KoMR0P
Traxxas Lipos (Basher Packs) - bit.ly/32cHZV1
8th Scale Race Electronics:
Speed Control (all) - bit.ly/3dm7RCM
Motor (eBuggy) -
Motor (eTruggy) - bit.ly/3a8vfBL
Motor (Short Course) - bit.ly/3bdg9es
Servos:
Protek 170SBL (Best Race) - bit.ly/2yBiuif
Protek 370TBL (Best Crawler) -
Protek 155T (Best Basher) - bit.ly/37N08tN
Protek 130T (Better Basher) - bit.ly/3bVCb6L
Protek 100T (Good Basher) -
Hobbyking 15298B (Super Cheap) - amzn.to/2HJKe8Y
Favorite Tools (Updated):
Protek Drill Tips - bit.ly/324wX58
Protek Hex Drivers -
Protek Nut Drivers - bit.ly/2NSjfLc
All in 1 Set - amzn.to/30Z3Z6j
Compact Set (New) - bit.ly/2GhibQC
Tuning Driver -
Shock Tools - bit.ly/2BnJTcv
Parts Trays and Pistons - bit.ly/2GN3xhv
MIP Thorp Drivers - bit.ly/2GKSIwu
MIP Thorp Nut Drivers - bit.ly/3irCJEs
Dewalt Electric Screwdriver - amzn.to/3jGn3wI
Oil Bag (Must have) -
Want to send me stuff to review or show off?
Mark Santa Maria
6710 Virginia Pkwy Ste 215 PMB 69
Mckinney TX 75071
Follow me on...
Patreon Page - / marksantamaria
Instagram - @themarksantamaria
Facebook - / themarksantamaria
RUclips - / marksantamaria
On The Tone Podcast - / onthetonerctt
On The Tone and Mark Santa Maria Vlog shirts are now on sale!
Colors - Blue with White, Black with Camo (+$3), Black with White (Limited Qualitites)
Email merch@msmvlog.com to order.
$20 for S-XL
$25 for 2XL-4XL
$10 for face mask
free shipping (Lower 48 only)
Music by Joakim Karud / joakimkarud
Music by: @dcuttermusic www.davidcutter...
#rccar #msmvlog #rcvlog
Priced out everything I wanted to do to and buy the hoss and said forget about it! Just get another xmaxx!😖
If u wanna test the durability give it to Kevin talbot he’ll make sure it gets a good test😂😂. Awesome video!
Seems like a lot to do , should’ve gone MIP
MIP XDuty FTW
That what I voted for 👍
ET and EB410 review?? 😊 👍
how to build a 1200 dollar stampede?
It’s finally snowing in Dallas😁😁
My hoss is out. Center diff melted, and a shaft broke. So yeah. Money money.
Edit: housing came in today, now just a shaft and I am golden
Lol tell me about it. My diff somehow broke in my brushed stampede
@@brysonkuhn3290 wow really? That sucks. Mine melted from friction somehow.
Get the aluminum housing and it won't happen again... You will thank me later!!!
@@AndromedaMusic553 Sounds like you're running it too hot. Traxxas sells an aluminum diff case to prevent the melting.
Hey Mark, you gotta put the 17mm hexes and the 17mm hubs for the proline wheels and BOOM all those problems are gone. AND you can get those hexes in green i believe
Been saying that myself. Did it on my slash several months ago.
I did this exact setup on my sampede 4x4. Pulled it all off my xo1 and put in on it. Never had a problem since. I may have broken a driveshaft at a joint but thats because i landed from a jump while holdin full throttle doing a double back flip. What do you expect 🤷♂️
All you need to do is hook it to a spare channel on your receiver I did that to my stampede I got A3 channel remote and I can turn it on and off and switch the settings of the lights right from a switch
just get slash 4wd steel alxes i had alumium hubs my bearings went and coundnt get them out of the alumium hubs so i went to rpm plastic ones
1,000 bucks in hop ups to make traxxas durable sounds about right
And still cost less than arrma upgrades.
@@spike-- definitely not
@@rcx8971 bull
@@rcx8971 Arrma fanboy. The driveshafts are all you need.
Iv got some real junk I wish I could get going. I wanted to bash my Revo in the snow....no go.. stay safe.
Probably won't be able to watch all the way through because my 4G signal is not the greatest right now. Were out of power at the moment.
Why I voted Tekno, lol. The traxxas threads are the same size as those previous axles. Mine only ever broke at the threads.
Hi I’m a big fan and want a hoss so bad
Mark, being that they are breaking at the threads... could it be that you may be overtightening the wheel nut thus causing the stub axle to break. 🤔. It happens on wheel studs on cars, that is the main reason we torque the wheel nuts.
We’re can I find those shock cover at ?
Hey man I want to ask you something do you think the hobbywing 4000 KV will be good for a stampede two-wheel drive and by the way I follow you on RUclips watching you on here it inspired me to get back into the hobby
look at the base of the threads, the problem is the maching not allowing enough fillet from the overall axle and the cutdown point, if the new part has more fillet they actually upgraded the part.
Ok guys I need a little help Deciding my next project reply with witch and why
Crawlers:
Axial scx10 ii
Axial scx10 iii
Traxxas trx4 sport
Other cars:
Slash scale monster energy trophy truck
Hoss( kinda like marks)
Hay Mark.
Like your vids.maybe you can help me out with some info on my t maxx nitro.im not sure what went wrong but last spring i was. Running the truck and all of asudden it stoped moving.i thought i blo the gears but when i took it apart (the traniy)there didnt seem to be any thing wrong.it runs just wont move .could it be the bell housing and cluch or just need a new trany?your input will be very help full.
Respectfully
George goodall
Hay Mark.
Like your vids.maybe you can help me out with some info on my t maxx nitro.im not sure what went wrong but last spring i was. Running the truck and all of asudden it stoped moving.i thought i blo the gears but when i took it apart (the traniy)there didnt seem to be any thing wrong.it runs just wont move .could it be the bell housing and cluch or just need a new trany?your input will be very help full.
Respectfully
George goodall
Mine always break at the pin and hex
The issue is the o.g stubs have a pin that sets wheel the hole the pin goes through cause a weak point.. the up graded axles don't have that issue and now have a actual set screw eliminating the hole/ weak point..
The light kit from murat rc on Ebay has a disconnect so you can unplug it when you dont want to run with them on. Very nice kit I have front and rear on my erevo...
who didn't vote for the Tekno kit? it comes with everything you need in it. for about 30% of the price and are beefier
Hey mark love the videos! I’m a newbie to rc and was wondering what radio do you recommend? I have been lookin at futaba, but really need some recommendations
check out the description section any of the videos!!! Mark lists all his recommendations!
Nice mark, I just used integy drive shaft almost same price of the stock one. Much better
Lol that’s what I thought turned out there was two lefts in the box. Had to send it back
Hi Mark i own a hoss myself and i would like to intall a fan on my motor and i whould like to install the same as you what parts do i need ?
Where do i get a pair of those shock dust covers? Thanks for the informative video.
You pay so much money for those homes and your neighbor has a big green box on his front lawn. 😡
I do believe you have a buying rc's problem. Wow
Lol
Hi love the vids keep it up
Has anyone else had problems with the center diff?
What are the prolines you are using on the HOSS
Watched to see the car at night. bbbbooooo click bait thumbnails
Could you please do more traxxas udr vids I just got 1
What if someone uses a xt60 like i do how can use the light kit
I want a hossso bad but I'm young so I don't have a lot of money
More bling bling into a bling bling 1/10 scale
Maybe not performance but cool factor. 😎
What happened to the install of the light kit???
what is the part number for the battery you use?
Bro what shock socks do you use?
Same here not that much but its cold as
Traxxas should expand their Buggy selection. A 4WD buggy would be nice. Maybe even an 1/8 scale.👍
I wish, the bandit is really tired
Since Mark has no 2wd buggy deal.. who wants to see him try and take a 2wd bandit and make it competitive😂😂. It would be like his revo Ebuggy, but even better.
Run a MSM color/style body with his frosted wing😂
I wonder if the teknos are beefty
Wow straight beautiful 🤩
What mah is the battery?
Seems like a waste
I put the whole xo1 set on mine as the 17mm set up widens the car and transfers the load onto the 6mm axle at the bearing, you just have to use 1/8 scale wheels. Mines hobby wing Max 8 4s with the castle 1512y 2650kv and its an animal. Lots of upgrades needed for the power including gen 3 Robinson racing slipper, hr racing billit centre shaft holder with bigger bearing and full aftermarket bearing set
Another advert for the not fit for purpose Traxassssssss
You should get some cheese to go with your wine.
danks Mark
i say for every month you get that rc from traxxas hobby shop like say if march it’s a maxx picture you get a maxx 👀👀👀😂😂👀
Hi iv been wondering can the light kit be attached to a different connecter my traxxas doesn't run a traxxas ESC iv running hobbywing max 6 lol
Hey
You could have just got the new upgraded 2nd gen Traxxas axels they are as strong as the MiP axels
🔥👍
I've been out of rc for a bit and got a hoss the other day ,what a little powerhouse! I was wondering about packing the center diff, would that reap any benefits? I'm not familiar with center diff setups but slipper clutches are better tight in my opinion. Just a novice thought 🙂
Looks great. Toronto is getting more snow today. I haven’t taken my truck out yet. I want to go brushless first.
Mark will xo-1 parts fit slash 4x4 vxl?
Hoss is basically a stampede which is a wider slash, rustler, etc.
Same thing happened to my proline driveshafts for my stampede. I was told I was tightening the wheel nuts too tight. But switched over to the same ones you have, haven't had any issues yet.
Thank you so much for this video it help me out tremendously!!! Stay cool...
They break a lot of times where the pins go through so the xo’s are a great improvement!
What’s the price at now for the upgrades you have done? I want to get one but I’m skeptical
Has worked great on my monster slash for over a year. I did have issues with wheel wobble from the drilled out holes. I went with 17mm hubs and have had no issues.
If I had to buy upgrade parts to fix the upgraded parts I all ready paid for I would be pissed lol
I’m in sunset TX and there’s like 3 4 inches of snow it’s crazy
that wire tap in for the light kit is pretty sweet! Forever waiting for a kit for the ERevo.....lol
Help my figure out how to get you a picture of my Oval car the cooling system
you should have just bought the different adapters to those wheels
Is there a such thing as an e revo 2.0 light kit? Those tail lights are badass
A little to late to get a respond, but, when is the next RC meet in Dallas?
Mine broke in the same place again . Even with the upgrade
Hey Mark,
Love your channel so I'm going to say get rid of that power tap. Doesn't make sense to have the lights on if you not driving. I made a video showing how to bypass that and use your receiver and traxxas remote to turn on and off. Easy. Kedp doing your thing.💯👍🏽
Never forget to unplug your battery with the power tap at the battery. Only thing sensible about it. Most remember, some don't haha.
Who’s next winner for the like button winner slot?
I thought stock was 5mm and X0-1 was 6mm?
Another great vid mark.👍🏻👍🏻
Thats lame of traxxas they make you reck your wheels so they only fit on that size of shaft so you can nly ever again use them on that rig dude there making money off that stuff and causing issues im sure. one you do that to your wheels there forever lopsided to a tinny bit its not like you just drill it out with there bit and the wheels are fine.
Aarma fanboy
@@mlaslett1 they really are some crybabies. Can't even drill a wheel.😭
Bruh the fucking axles are made for a bigger vehicle. They aren't forcing you to install the axles. All you have to do is drill your fucking wheel.
Yes!! Can’t wait for a bash video with this!! 😁😁
Hi mark
Helloo Mark make and video of one traxxas rustler 4x4 vxl ultimate??!!!!
LIKE you make in the hoss?
'You Can Do It U Can Update It' hahaha
Nice. Whats the part# for power tap.
Nice upgrade.
Hi I like your vids
Sup
Yo mark stay safe
Keep up the great work
Love it!
I really like the tap. You'll never forget to unplug your battery.
The xo1 shafts don't break on 6s in a car 2x as heavy... They gonna be aight mark😁
Had those XO-1 shafts in a 2wd slash. Things were garbage. Went MIP after that no problems
@@reidisaacson9623 hmm. Ran mine very hard in a 2wd slash mt with castle 2400 on 4s for about 2 years without issue. I did upgrade my slipper and did not lock it down. Maybe I got lucky?
@@ragsixracing MIP in a 2wd slash on 8s is great. Even the stock transmission
@@reidisaacson9623 ok... 8s in a 2wd slash huh? I'm proud of you
@@ragsixracing Its just an xmaxx system. Motor is held on by one screw because I dremeled off the whole motor tunnel
Can you please do more arrma senton vlogs
First
Hi
Hi I saw you in Stovers comment