What.... wait,.... what did i just see, lolololol, he said fuse was bad, he scratched out a trace, bypassed the fuse by soldering a wire from end to end that he used his teeth to strip away cover, said it could be a small explosion, then test and ........ its working except a crack in the screen....... lol ... we gotta love this guy..
@@maxwarfield6699 most def not thinking its funny about him. whats funny to me is he found the problem and fixed it without a big charge im thinking. This guy is fantastic. in 15 min, did what was needed and its working. I think its very smart of him to figure the board out and know what to cancel out and make it work, as i said, ,,,,, WE GOTTA LOVE THIS GUY..... i love watching him.... and as far as the customer is concerned, give this guy big hugggggggsssss.
Yes, it corrects the Power Factor of a load connected to an AC input: Essentially, a Power Factor measures, in the simplest possible terms, to what extent a load resembles a simple resistor : AC current and voltage are in phase, and the current/voltage relationship is linear. When a load doesn’t appear as a resistor, it consumes reactive power (current/voltage not in phase, more capacitive or inductive load), or absorbs a non linear and/or unbalanced current (like a simple full-bridge rectifier - the current only goes through around the peak value, and the bridge is never perfectly symmetrical).
Further, a PFC is nothing but a type of Boost converter in a closed-loop. The current loop is very important, as it post-regulates current to resemble a perfect sine.
hammershigh absolutely not. PFC < 1 implies reactive power consumption and/or and strain to your power components (power switches). It also disturbs the grid by injecting harmonics into the grid if current is deformed (non-sinusoidal).
the fastest fixer in town.,.. and good ole Christian.. the bravest tester in town work together to make it all happen! As or dodgy.. that circuit was dodgy.. you fixed it..
What you call "dodgey" Still displays an understanding of electronics and USEFUL work arounds that would otherwise cause you to spend an hour trying to source a component. Excellent.
I'm so addicted to watching Sorin's videos. Reminds me of some of the guys I used to work with when I did laptop repair. I'm getting back into repairing circuit boards and I'm brushing up on "street smart" techniques like Sorin does. Love this guy. Does anyone know what the pad is that he is using to cool down chips after using hot air? What is that?
I think they're just silicone thermal pads. Available on Amazon or anywhere. Or probably buried or included in some of the circuit boards you're working on. I found several big ones on a plasma tv I used for salvage a while back.
Speaking about power factor correction circuit when it is inside in a switch mode power supply it is a boost mode circuit that choppers and raises the rectified dc voltage to a higher level.The reason for that is that needs a very small capacitor for filtering the higher voltage which has very high frequency compared to the mains 100HZ bridge rectified.The higher voltage leads to a lower duty cycle for the main circuit of the switch mode power sypply so there is less stress for the entire circuit and lower current consuption due to the higher input voltage.And because there is a coil for the voltage boosting there is 90 degree of phase difference between voltage and current simply because the PFC circuit is a booster circuit,a dc/dc converter.And its operation is totally different as a circuit from the PFC of the electric conventional motors,because makes phase difference on purpose when boosts the voltage but for the AC mains voltage makes no difference or sense at all.
@@andrew_koala2974 If you had a little knowledge in elementary electronics you may already know that a full bridge rectified ac mains voltage of 50HZ or 60Hz or any frequency always doubles the frequency,mr gramatically correct professor of the english language.And 100HZ compared to 100KHZ frequency operation of the pfc the ratio is 1000.
Seriously though, I have been watching your videos for about three years and have since repaired quite a few laptops following your techniques. However, I thought you might be interested to hear about my exploits in trying to fix a HP Mini notebook; I determined there was short on the main 19V power rail and even tracked it to being on the 19v side of one of the lower power supplies; one of the "Always on" power supplies. But I couldn't pinpoint it in the end. I tried the "power supply" method and unfortunately it didn't even warm the board at all!. 5A and the board stayed cold! In the end I got so frustrated that I started removing coils to try to isolate the fault but there were too many possibilities for the fault that in the end I gave up and bought a replacement motherboard. I even removed the CPU because the short seemed to be in that power supply, but the short still existed without the CPU on the board! Obviously the short, wherever it is, was so perfect that it provided no resistance and therefore generated no heat anywhere! I even soldered the power supply to the shorted rail and left it discharging 5A (at about 5V) for a long time, with NO HEAT generated anywhere! I wondered whether you might have given up too, or whether you might have had another strategy in this case? Thank you for all your videos, which have helped me understand electronics alongside my other studies!
Thanks I find a little time to watching the videos. Long time to hot to work. Now it’s better. Saving 15$ in a jeer cost repair 80£ thanks for saving it for Sorin
What advice would you give to someone with an electronics background that wants to learn to repair phones, TVs, and whatnot, equipment needed? BGA machines for phone and large chips, DVOM , Scope, mag camera, soldering equipment, but what else do you use? Been working on a few TVs, computers, but very few phones and tablets.
I thought that PFC circuit was previous to the rest of the power supply. How does it work if you cut one trace? Wouldn't be necessary to bypass it with a wire?
I have been watching your videos for some years now and I have learnt a lot from you thanks for sharing your knowledge, I have learn the majority of electronic things from your videos. I have a question why sometime you remove the mosfet from the laptop motherboard before you do the bridge and sometime you leave the mosfet . thank you sorin my name is ed and I am from trinidad
hey boss, what's the name of the small metal part within the TV back panel - where you screw the screw to mount the TV.... two of mine broken.... need replacement part....
I have two samsung tv of the same model. One of it the display panel is spoilt but the speakers are still working. Can I add the speakers into the other TV and in total have four speakers?
Speaking of TV's, it is unnerving when you come back from being gone all day and find your TV on Telemundo when you never put it on there initially. On another note, I am still having problems with my Toshiba Satellite computer.
Tried to repair this exact board. Fuse was fine, but no matter what I did it just refused to output more than 2Vs. I started taking shots in the dark, replaced most of the through-hole components which I took from a similar board I had lying around, and it was always the same. I gave up on it, but do you have any idea what would cause this?
Have a Samsung UE65JS9590Q sound is there backlight but also a picture. I've swapped everything. do you have a tip? How do I get picture again? don't have any wiring diagrams. Can it also be due to the Connect Box? I don't have a picture of the One Connect Box either. LG and great videos
Please, could you suggest which one to choose: Intel graphics 4000 vs AMD Radeon HD 7570M motherboard? Considering that Intel provides the new driver all the time and AMD one driver forever. Thanks.
If I understand this correctly, he cut a trace to the shorted mosfet circuit and the TV now powers on (but is cracked) , Some comments about the circuit not being necessary. to quick test the TV that's Ok, but I'd be concerned about liability issues if this was a permanent fix, when the TV catches fire. (at least dead people can't complain)
I have a Samsung 2019 qled just in almost a boot loop it will come on show the Samsung qled logo then fade or restart constantly, I work in the av industry so happy to take the tv apart and test stuff just wondering if you might know where to start Samsung support are absolutely useless and it’s 6 months out of warranty
Thats samsung 50inch smart tv power board isnt?, i have an issue with that kind of board, the high voltage to primer + from FET are fluctuating. How is that happen?
Do you have any tips for repairing a tv like that one where the screen has gone dark on one side? The dark strip extends from the left edge and covers about 10% of the screen.
Suggestion: It would be useful if you use lamp in series circuit for locating a short part within the primary section of power supply input rather than shorting that main fuse could mean much more damage on the components...
Surprised the customer did not claim the screen was ok when he brought the tv in, that's the normal response when we tell a customer the screen is cracked and that's when they start saying we cracked it, We respond with, The cracked screen is what caused the tv to stop working and was the tv dead when you arrived with it ,Yes or No?
@@andrew_koala2974 which does not imply dishonesty as a regular practice for clients and or repair technicians ,sometimes one forgets or imagine more than there is😊
Buna Sorin, am nevoie de idei, ce poate sa fie cu laptopul Asus QLAB, de nu recunoaste hard drive-ul. Nu recunoste nice msata hard drive-ul. As aprecia foarte mult, daca ai putea ajuta. Sa ai o zi buna.
Hi Hp pavillion d4 no light on the charging and blinking on battery led. On switcthing on nothing pressing windows + B switches on and no display on the screen. Fan runs continuously no stop all led lights remain on.
I was going to join as a member, but I tried to add a comment detailing my experiences following your videos, and it dumped me out after typing quite a lengthy message, so I have decided to follow Diana instead! 🤣🤣🤣
Sorin, I'm trying but I still not get it. what did you cancel there. What part of circuit did you skipp. Could you explain/draw it for us on the next video? thanks
Don't lie to us man! You didn't do it in 15 minutes! You did it in less than 5, you just spent the other 10 talking to friends and answering phone calls!
I am waiting for you to fix a Samsung LED issue where each line of LEDs is split into two. The first half of the strip is 12volts but has a return line after the first half of the LEDs back into the beginning of the positive through a diode and it boosts the line to 24 which lights the second half of the strip. If you do fix something like this please share.
Plastic Bottle Face - join the ERS Discord community if you want help with issues. Just make sure to read the rules and follow them by posting in the correct section 👍 discord.com/invite/6zQWaTN
Apu Sarker - join the ERS Discord community if you want help with issues. Just make sure to read the rules and follow them by posting in the correct section 👍 discord.com/invite/6zQWaTN
I have a 50 inch plasma. It has a hair thin line running vertically right down the center of the picture. You can hardly see it but it’s there any ideas on how to fix this I know you can’t answer questions but just thought I’d give it a try . It’s not too big a problem but it’ll probably get worse. Anybody sees this out there that has any ideas where to start? Looking for a problem like that I’d like to know. Thanks.
Hi man I had a problem Hi, I had some problem, in a few days while I gaming my laptop suddenly sad "zárolás" (it is a Hungarian word) it mean maybe locking and than black screen, I puss the power button it said "windows windoatása" which mean continue window, and I continue the game where I finished. I had an other problem, last day I whacking movie and in the middle of the movie the screen had black screen but the audio still went on, I pushed the display down slowly and it has crazy noise, the screen is seems like recovered 2 minute later black screen and the laptop isn't turn on. I try to charge it but it couldn't and that's it. Can you help me???
Hi, I am a romanian guy like you with a big problem. I have a MSI GP65 leopard 9sd-021nl and it s not working. It s about the motherboard. Can we talk in private about this?
Johannes Aipanda - join the ERS Discord community if you want help with issues. We also have some channels with resources and link for you to read and learn from. Just make sure to read the rules and follow them by posting in the correct section 👍 discord.com/invite/6zQWaTN
Good video! Anybody on here know where to find the [Insert] key on that keyboard he used at the end there??? (It's used for copy/paste on the CLI in Linux)
What is with the butthurt comments on this video? The screen is broken making it pretty much worthless and it is a waste to spend time and parts on the thing.... don't mind the idiots Sorin well done as always.
This man could fix a tv during the comercial break of a football match.
What.... wait,.... what did i just see, lolololol, he said fuse was bad, he scratched out a trace, bypassed the fuse by soldering a wire from end to end that he used his teeth to strip away cover, said it could be a small explosion, then test and ........ its working except a crack in the screen....... lol ... we gotta love this guy..
Put yourself in the customer’s place, you might not find it as funny.
@@maxwarfield6699 most def not thinking its funny about him. whats funny to me is he found the problem and fixed it without a big charge im thinking. This guy is fantastic. in 15 min, did what was needed and its working. I think its very smart of him to figure the board out and know what to cancel out and make it work, as i said, ,,,,, WE GOTTA LOVE THIS GUY..... i love watching him.... and as far as the customer is concerned, give this guy big hugggggggsssss.
So I like your quick fixes but to learn and understand it would be nice if you can diagnose the faulty component in that cirquit
PFC: Power Factor Correction?
I see this term in PC power supply
really thanks for the video it is full of knowledge for me as always
Yes, it corrects the Power Factor of a load connected to an AC input: Essentially, a Power Factor measures, in the simplest possible terms, to what extent a load resembles a simple resistor : AC current and voltage are in phase, and the current/voltage relationship is linear. When a load doesn’t appear as a resistor, it consumes reactive power (current/voltage not in phase, more capacitive or inductive load), or absorbs a non linear and/or unbalanced current (like a simple full-bridge rectifier - the current only goes through around the peak value, and the bridge is never perfectly symmetrical).
Further, a PFC is nothing but a type of Boost converter in a closed-loop. The current loop is very important, as it post-regulates current to resemble a perfect sine.
@@crazyphil7782 : what is your opinion of Sorin's repair?
The ONLY purpose of PFC is to prevent "backfiring" of L/C components (phase-disturbance) to the grid.
hammershigh absolutely not. PFC < 1 implies reactive power consumption and/or and strain to your power components (power switches). It also disturbs the grid by injecting harmonics into the grid if current is deformed (non-sinusoidal).
he has only 15minutes for fix a tv, but he check why camera is not working first - because he can :)
the fastest fixer in town.,.. and good ole Christian.. the bravest tester in town work together to make it all happen! As or dodgy.. that circuit was dodgy.. you fixed it..
Yup it's Power factor correction and we used to remove the modules from copier supplies.👍👍👍
He strips wires by teeth. He’s good in my book
I have the same bad habit.
You nailed that one Sorin, scrub a track no worries love it!
I'm only here for
Dodgy methods...lol
Funny he calls it dodgy but I have some of his dodgy methods with success. No customer came back complaining😂😂
maybe "dodgy", but if one understands the functions of circuits, this method is very effective, imho
+1
Dodgy manufacturers you mean! On the other hand, that guy is the light, the word, the truth 😃
@@lunarmodule6419 Yes only joking..
What you call "dodgey" Still displays an understanding of electronics and USEFUL work arounds that would otherwise cause you to spend an hour trying to source a component. Excellent.
I'm so addicted to watching Sorin's videos. Reminds me of some of the guys I used to work with when I did laptop repair. I'm getting back into repairing circuit boards and I'm brushing up on "street smart" techniques like Sorin does. Love this guy. Does anyone know what the pad is that he is using to cool down chips after using hot air? What is that?
I think they're just silicone thermal pads. Available on Amazon or anywhere. Or probably buried or included in some of the circuit boards you're working on. I found several big ones on a plasma tv I used for salvage a while back.
Speaking about power factor correction circuit when it is inside in a switch mode power supply it is a boost mode circuit that choppers and raises the rectified dc voltage to a higher level.The reason for that is that needs a very small capacitor for filtering the higher voltage which has very high frequency compared to the mains 100HZ bridge rectified.The higher voltage leads to a lower duty cycle for the main circuit of the switch mode power sypply so there is less stress for the entire circuit and lower current consuption due to the higher input voltage.And because there is a coil for the voltage boosting there is 90 degree of phase difference between voltage and current simply because the PFC circuit is a booster circuit,a dc/dc converter.And its operation is totally different as a circuit from the PFC of the electric conventional motors,because makes phase difference on purpose when boosts the voltage but for the AC mains voltage makes no difference or sense at all.
@@andrew_koala2974 If you had a little knowledge in elementary electronics you may already know that a full bridge rectified ac mains voltage of 50HZ or 60Hz or any frequency always doubles the frequency,mr gramatically correct professor of the english language.And 100HZ compared to 100KHZ frequency operation of the pfc the ratio is 1000.
Watching from Jamaica 🇯🇲.....best videos
more TV repairs please !!!
Seriously though, I have been watching your videos for about three years and have since repaired quite a few laptops following your techniques. However, I thought you might be interested to hear about my exploits in trying to fix a HP Mini notebook; I determined there was short on the main 19V power rail and even tracked it to being on the 19v side of one of the lower power supplies; one of the "Always on" power supplies. But I couldn't pinpoint it in the end. I tried the "power supply" method and unfortunately it didn't even warm the board at all!. 5A and the board stayed cold! In the end I got so frustrated that I started removing coils to try to isolate the fault but there were too many possibilities for the fault that in the end I gave up and bought a replacement motherboard. I even removed the CPU because the short seemed to be in that power supply, but the short still existed without the CPU on the board! Obviously the short, wherever it is, was so perfect that it provided no resistance and therefore generated no heat anywhere! I even soldered the power supply to the shorted rail and left it discharging 5A (at about 5V) for a long time, with NO HEAT generated anywhere! I wondered whether you might have given up too, or whether you might have had another strategy in this case? Thank you for all your videos, which have helped me understand electronics alongside my other studies!
Have a great weekend Sorin and thank you!
Defo Romanians... I love our English accent... well done my friend!
Ultimate SMPS technology and perfection in that PCB.
Excellent Excellent Excellent - From - India 🇮🇳
Apreciez videoclipurile di 2 motive 1 imi imbunatatesc cunostintele din domeniu electronic si al 2 lea motiv mai invat putina engleza.Te respect mult.
Great work Sorin !
Thanks I find a little time to watching the videos.
Long time to hot to work. Now it’s better.
Saving 15$ in a jeer cost repair 80£ thanks for saving it for Sorin
no PFC, no shorted PCF right, lol, miss so much this old fixes (tv boards)
What advice would you give to someone with an electronics background that wants to learn to repair phones, TVs, and whatnot, equipment needed? BGA machines for phone and large chips, DVOM , Scope, mag camera, soldering equipment, but what else do you use? Been working on a few TVs, computers, but very few phones and tablets.
Thank you for sharing and keep on keeping on!
Can you diagnose any fault on a board with just a multimeter or do i need a oscilloscope. What's the minimum equipment. i need
I thought that PFC circuit was previous to the rest of the power supply. How does it work if you cut one trace? Wouldn't be necessary to bypass it with a wire?
2 videos. just what i needed. just had lightning strike on my tv :) ty so much
There will be just a little Explosion :)
I have been watching your videos for some years now and I have learnt a lot from you thanks for sharing your knowledge, I have learn the majority of electronic things from your videos. I have a question why sometime you remove the mosfet from the laptop motherboard before you do the bridge and sometime you leave the mosfet . thank you sorin my name is ed and I am from trinidad
hey boss, what's the name of the small metal part within the TV back panel - where you screw the screw to mount the TV.... two of mine broken.... need replacement part....
A picture of said items often works better than its technical name ,take a pic of component and show it to part guy.
This guy is an engineer.🔥🔥👈👈♥️♥️♥️♥️
I have two samsung tv of the same model. One of it the display panel is spoilt but the speakers are still working. Can I add the speakers into the other TV and in total have four speakers?
Thank you for sharing your knowledge Mr. Sorin..Great video ... from philippines! Godbless :)
Speaking of TV's, it is unnerving when you come back from being gone all day and find your TV on Telemundo when you never put it on there initially. On another note, I am still having problems with my Toshiba Satellite computer.
Thanks Uncle.
Tried to repair this exact board. Fuse was fine, but no matter what I did it just refused to output more than 2Vs. I started taking shots in the dark, replaced most of the through-hole components which I took from a similar board I had lying around, and it was always the same. I gave up on it, but do you have any idea what would cause this?
Have a Samsung UE65JS9590Q sound is there backlight but also a picture. I've swapped everything. do you have a tip? How do I get picture again? don't have any wiring diagrams. Can it also be due to the Connect Box? I don't have a picture of the One Connect Box either. LG and great videos
Please, could you suggest which one to choose: Intel graphics 4000 vs AMD Radeon HD 7570M motherboard? Considering that Intel provides the new driver all the time and AMD one driver forever. Thanks.
If I understand this correctly, he cut a trace to the shorted mosfet circuit and the TV now powers on (but is cracked) , Some comments about the circuit not being necessary. to quick test the TV that's Ok, but I'd be concerned about liability issues if this was a permanent fix, when the TV catches fire. (at least dead people can't complain)
Cannot complain in this realm ,yes🤭
Finally a proper fuse !
I wish life could be dodgy like this
My life is 😂
Hi do you have a tutorial for no display in Hansung Sparq netbook?
Good..i can learn a lot here
I have a Samsung 2019 qled just in almost a boot loop it will come on show the Samsung qled logo then fade or restart constantly, I work in the av industry so happy to take the tv apart and test stuff just wondering if you might know where to start
Samsung support are absolutely useless and it’s 6 months out of warranty
Would it have been so difficult to find the actual fault and replace the faulty component?
Thats samsung 50inch smart tv power board isnt?, i have an issue with that kind of board, the high voltage to primer + from FET are fluctuating. How is that happen?
I Love it. Thank You
Excellent work M.r
What is the model of the Hantek Oscilloscope/Multimeter you are using?
I have the same board, the problem 12v not stable keep changing 6-7-11v
I dont know what the problem
I think i need 15;days not 15 min to fix mine
Do you have any tips for repairing a tv like that one where the screen has gone dark on one side? The dark strip extends from the left edge and covers about 10% of the screen.
Backlights are broken
Suggestion: It would be useful if you use lamp in series circuit for locating a short part within the primary section of power supply input rather than shorting that main fuse could mean much more damage on the components...
That was a quick fix. 👍
Surprised the customer did not claim the screen was ok when he brought the tv in, that's the normal response when we tell a customer the screen is cracked and that's when they start saying we cracked it, We respond with, The cracked screen is what caused the tv to stop working and was the tv dead when you arrived with it ,Yes or No?
@@andrew_koala2974 which does not imply dishonesty as a regular practice for clients and or repair technicians ,sometimes one forgets or imagine more than there is😊
Have you ever repaired a plasma TV sorin? That inverter circuits look very complicated...
good job sr
hello sir, have you ever repair asus x555dg / x555uj, for PI8601 SHOWN above ic body is 3W=2L, this ic equivalent with? thanks
Buna Sorin, am nevoie de idei, ce poate sa fie cu laptopul Asus QLAB, de nu recunoaste hard drive-ul. Nu recunoste nice msata hard drive-ul. As aprecia foarte mult, daca ai putea ajuta. Sa ai o zi buna.
Samsung led TV model UA48H4203ARXUM ka power supply board kya rate me hai?
Hi Hp pavillion d4 no light on the charging and blinking on battery led. On switcthing on nothing pressing windows + B switches on and no display on the screen. Fan runs continuously no stop all led lights remain on.
Where you can buy lcd panels in UK apart of ebay?
What was shorted? Mosfet?
Thank you sir for your videos. Can you discuss the inverter board of airconditioner. How the curcuit works. Thnks agin and more power!
I was going to join as a member, but I tried to add a comment detailing my experiences following your videos, and it dumped me out after typing quite a lengthy message, so I have decided to follow Diana instead! 🤣🤣🤣
Thankfully the power factor correction circuit is not monitored in that set :-D
Sorin, I'm trying but I still not get it. what did you cancel there. What part of circuit did you skipp.
Could you explain/draw it for us on the next video? thanks
He cancel a circuit that improves efficiency of TV's power supply. It's a compliance thing, like reducing EMI/RFI.
Don't lie to us man! You didn't do it in 15 minutes! You did it in less than 5, you just spent the other 10 talking to friends and answering phone calls!
Toshiba L300 No Display Problem, I Was Heat the Chipset and Graphics on Motherboard. But Display not show. Can u Help me....
tv with pfc more money for customer.nice video proffesor.
I am waiting for you to fix a Samsung LED issue where each line of LEDs is split into two. The first half of the strip is 12volts but has a return line after the first half of the LEDs back into the beginning of the positive through a diode and it boosts the line to 24 which lights the second half of the strip. If you do fix something like this please share.
Plastic Bottle Face - join the ERS Discord community if you want help with issues. Just make sure to read the rules and follow them by posting in the correct section 👍 discord.com/invite/6zQWaTN
PFC is power factor correction.
11:23 you do sacrifice your coworkers 🤣🤣🤣🤣🤣
When i power on my galaxy tab a6 it will show.
Could not do normal boot.inval id kernel lenth
How to fix i solved it please help me
Apu Sarker - join the ERS Discord community if you want help with issues. Just make sure to read the rules and follow them by posting in the correct section 👍 discord.com/invite/6zQWaTN
PFC (power factor correction) ?
Beat me to it haha
Ok, you came up with it later in the video ;)
I have a 50 inch plasma. It has a hair thin line running vertically right down the center of the picture. You can hardly see it but it’s there any ideas on how to fix this I know you can’t answer questions but just thought I’d give it a try . It’s not too big a problem but it’ll probably get worse. Anybody sees this out there that has any ideas where to start? Looking for a problem like that I’d like to know. Thanks.
Excellent dodgy job Sorin hahaha
You are genius
Thank you Sorin
Hi man I had a problem
Hi, I had some problem, in a few days while I gaming my laptop suddenly sad "zárolás" (it is a Hungarian word) it mean maybe locking and than black screen, I puss the power button it said "windows windoatása" which mean continue window, and I continue the game where I finished.
I had an other problem, last day I whacking movie and in the middle of the movie the screen had black screen but the audio still went on, I pushed the display down slowly and it has crazy noise, the screen is seems like recovered 2 minute later black screen and the laptop isn't turn on. I try to charge it but it couldn't and that's it.
Can you help me???
Hú, hát ez az angol kissé darabos még :P
Ha még aktuális, írd le az új tüneteket.
@@pp3v42_g3h az első még megvan
a 2-at megoldottam
Thinks for information
Save the energy for cost but actualy it cost money to fix it 😂
I got a drawer full of those screwdrivers now, lol. All the parts from china come with them now. There actually pretty nice.
Hi, I am a romanian guy like you with a big problem. I have a MSI GP65 leopard 9sd-021nl and it s not working. It s about the motherboard. Can we talk in private about this?
FANTASTIC!!!
Thanks thanks sar
Sorin would be my best friend in a Zombie Apocalypse:):)
Only for the technical zombies...
What course online can I do to learn more about this?
Johannes Aipanda - join the ERS Discord community if you want help with issues. We also have some channels with resources and link for you to read and learn from. Just make sure to read the rules and follow them by posting in the correct section 👍 discord.com/invite/6zQWaTN
Its alive!
Good video! Anybody on here know where to find the [Insert] key on that keyboard he used at the end there??? (It's used for copy/paste on the CLI in Linux)
@@andrew_koala2974 ok that settles that ,anybody gets it?😆
What is with the butthurt comments on this video? The screen is broken making it pretty much worthless and it is a waste to spend time and parts on the thing.... don't mind the idiots Sorin well done as always.
Hello, have you ever repaired electronic cigarette or thrown away?
I always thought it was Staten Island !
CALIBRATINGGGGG FUSE 😂😂
Hi sir ji my laptop dell inspiron 15-3521 not power on. Power light is on and beep after 1 seconds beep what is problem plz reply me sir
Could be an array of things ,remove hard drive and change memory for starters....see if it boot further.
thats great...my buddy have a samsung with bad psu!
❤❤❤❤
PFC Power Factor Correction
PFC Power Factor Controller
7:50 let's cut this track with the wrong tool of course...
As they say naughty but nice 👌
14:27 bad news for the owner 😭
If they didn't noticed accepting the work the owner could claim it was good before...
@@DumahBrazorf it is a big problem especially when there is no trust between a customer and the shop
@@kahlid-ataya one wonders why manufacturers produces screens that crack just by looking at them though.
@@ericscaillet2232 because they want the customer to buy more its as simple as that
@@kahlid-ataya one good point ,I recall older cell phone , screen hardly ever cracked .