Using A Pump Center & Wobble Stick To Center A Watch Main Plate
HTML-код
- Опубликовано: 2 апр 2024
- Taken from "Making a Watchmaker's Faceplate for the Sherline Lathe - Part 4" - • Watchmaking - Making a...
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": amzn.to/2FObS1D
"Machinery's handbook": amzn.to/2pi7XE5
"Lathework: A Complete Course (Workshop Practice Series)" - amzn.to/3Zt1DJM
"Drills, Taps and Dies", Tubal Cain: amzn.to/4c0e5H0
"Hardening, Tempering & Heat Treatment", Tubal Cain: amzn.to/2IdTQLw
Tools & Shop Products:
Sherline Lathe: amzn.to/2pnXM19
Sherline WW collets: amzn.to/2FYZ7F8
Optivisor Headband Magnifier: amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/48Ofcac
Interapid Dial Test Indicator: amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Heavy Duty Arbor Press: - amzn.to/46HdTZV
Geevorks Spotting Drill Bit, M42 HSS High Speed Steel Drill Bit Set,7PCS 90 Degree Drilling Chamfering Tool - 3 4 5 6 8 10 12mm: amzn.to/48KiTO5
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Dykem 80300 Steel Blue Layout Fluid: amzn.to/3LvNAO8
Bergeon Professional Cleaning Rodico: amzn.to/3LyKKb3
Dialux Metal Polishing Compound White and Grey 4oz 1/4b: amzn.to/3vopCPo
Blue Matador Abrasive Paper: amzn.to/3PRnQhJ
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: amzn.to/3PNNK5M
General Purpose Latex Finger Cots: amzn.to/3ZsYrhi
Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: amzn.to/3RzIV1l 
Развлечения
The day has come when I have to reluctantly admit that precision machining setup can be done with a pointy stick.
Chris, yet again you've shown us how to understand the things you do without even saying a word..
I do enjoy listening to him talk, It's almost like I'm in meditation.
The only video I've ever seen that could rightly use "this one simple trick" in the title without a hint of clickbait
goodness. that’s a special level of precision.
the only content i watch on normal speed- thanks so much!
😂 same. I hit pause turned down to x1 and went back to the 0:07 to the start.
I especially enjoyed seeing the 1:10 ratio being pointed out. Very nice.
Your videos are my moment of zen throughout the week.
Amazingly simple and effective
Old time simple. You can't to any better.
Never seen one this simple before!
Love it when super cheap and dead-easy methods outperform modern high tech in their goals except in efficiency. It means you could most likely build a functioning pocket watch with tech from Antikythera-era if you don't mind that it takes way longer than doing it today and it being somewhat bigger than today.
Your level of everything is masterful. I always have to clean up the puddle of drool I make after watching your videos.
It’s absolutely nuts how simple yet mind blowingly accurate this is
After all the time and effort you put into making such a beautiful watchmaker's faceplate I'm surprised your wobblestick isn't made out of brass rod stock with matching engravings..... or is that an upcoming project 😉 😄 👍
The wood is so soft he doesn't risk damaging the jewel he's using as a center hole.
@@AIM54A
You only live once. 🎉
What a brilliant method of centering something.
That’s the same indicator I use daily and I love it. Mine is the version with the long stem
Super fancy facplate holder on a precision lathe...
And the almighty stick.
Sherline should sponsor you. I can't think of a better way to demonstrate the capabilities of their lathe than what you have shown. Of course that probably says more to your skill than their equipment but I still think they should sponsor you though.
Excellent video. You have the precision a sloppy guy like me has always dreamed of.
Amazing precision on such a tiny lathe.
Seeing this plate fully assembled and mounted so neatly, ready to be put to use in such a neat and wonderful manner, gave me goosebumps.
Thank you for sharing this with us, Chris. 🤩
your skillsets are getting better by the day very impressive
I love this. I love how simple and yet effective it is. Using this very basic visual method can almost definitely get you accuracy in the 0.00001" range (hundred thousandth's inch) range, which is effectively beyond the actual accuracy of most equipment you can use to do machining with.
Or in other words, this is the best example of K.I.S.S. - keep it simple, stupid - this is so elegantly simple and obviously so incredibly effective. Thanks for sharing. 🙂
cool. will remember this technique with the "quill"
The simplest things can be amazing. Thanks Chris
The slow, soft ticking in the background was a nice touch.
Super fascinating! Can’t wait to see the finished piece!
I can. The longer before we see the completed piece the more we are likely to see if it being made😊
Engineer “there’s no such thing as perfectly centred!” Chris “hold my beer”
Oh. My. GOODNESS... I actually laughed out out and fist bumped the air when the wobbler didnt move (on the :10 side, of course)
Watchmaking is a modern profession with a mindset of an ancient Greek philosopher.
Excellence as usual. Thank you Chris
Chris - this absolutely blew my mind. So simple, yet so clever, not to mention your absolutely incredible craftsmanship making all these parts. You really are one of a kind.
The elegance in all aspects is sublime.
I keep on having to recalibrate my brain to the fact that this is a Sherline and not a 10" South Bend. I know that sounds crazy, but the scale you're always working on is just so much smaller than anything I've ever tried to do. Really amazing level of precision.
Nice trick this, I use a similar gadget for centring work on my Myford’s faceplate sometimes.
God it's so satisfying to learn a new technique. Thank you for sharing this.
That's a great solution
Astonishing
Lovely faceplate,Chris 👌The simple principle of the increased ratio 'indicator rod' technique....it is as old as the hills but still a joy to watch being used.
Wonderfully effective simplicity.
Beautiful!!!!!
Stupefacente!
🤯 amazingly clever!
One day the Clickspring museum will have all of the tools, bits, bobs, jewelry, machinery, clocks, watches and all the other amazing things that Chris has made. I want to go and see it now but, i will wait...i will wait
That was brilliant!
Brilliant.
Wow. Just wow. 👍
Beautiful as always!
Beautiful 👌
Thanks for sharing 👍
fascinating.
If you really wanted to go banana you could use a laser pointer on the lever to extend the 10 dimension to pretty much as long as you like.
Reducing error with a 10:1 ratio there has got to be nerve-wracking in adjusting, but probably worth it for what you do. Gotta say - you demonstrate your expertise with the jigs, techniques and the tools you make to... well, make more tools. It illustrates that saying, "If you want to understand something, be able to teach it."
The Transformation into Art!
Perfection! Accurate to micron level.
Wonderful so ingenious. All the best
OH WHAT DID I JUST LEARN! That's amazing
Something similar could be used to check my bandsaw wheels for runout, but I really want a dial indicator.
The engraved back of the plate, I am willing to bet Chris did that for practice!
The wobble stick is different than what I was taught, but it looks simpler than what I was taught!
There's a long video of the engraving, check it out!
(seeing what the wobble stick is and how it's used) Oh, that's clever!
Mind blown again, absolutely god level skills
Watch making or lenses were certainly the first manufactured precision items. The first mass produced precision manufactured item was the lowly pencil.
Hmm could you use a Dial indicator at the wobbly end for that extra bit of precision.
Your workmanship is beautiful and this is a really neat way to find a center for a watch body. I made something similar with a sharpened wire stuck through a rubber band, rather than balanced on a tool rest, because the thing that holds the rubber band I 3d printed so it snaps onto a boring bar holder in the qctp. It's been very useful for picking up transfer punch dots and getting them perfectly centered. (Well it's great for indicating center, but the process of centering is still awful if it's on a faceplate rather than a four-jaw.)
So simple yet so precision. Thank you so much for showing this technique.
Another classic example of machinist porn. Lovely work as per your usual high standard. Thank You for the Awesome video!!!
Insane! I wonder what's the run off of the lathe itself?
Fascinating lever...Archimedes is greeting
Most Australian video title
I'm sure you have plenty of your own ideas for projects, but one I'd love to see is you making a replica of John Harrison's H4 chronometer from the mid-1700's. The one that won the prize from the British gov't for use in ship navigation.
Gud vid 😄
Who needs indicators if you have a stick and a good set of brains.
I want one! (Watch) Patek Philippe could learn a few things from you.
Big toothpick for highly accurate concentricity, nice
👍😎
❤️🔥
Very nice, I never understood why these watchmaker's plates are made the way the are, and how to use them.
But --- I can not link this clip to any of your known projects, something new in the making? Though that watch does not look new...
Maybe geometric chuck or something for next project?
Chris does have a rose engine, not sure if that qualifies?
amazing video. How does that compare to a dial gauge on the wall of the hole? - i would think you have access to gauges that are more than 10x as fine as the human eye here?
How do you keep your lathe so clean?
Will there be a build video of the watch?
I believe that it's one that Chris is repairing, not a new build.
How do you get the tool rest to the right height?
Does need to be? It seems that it would show the error regardless of the height.
I guess even if the toolrest was slightly high or low (or even if the stick was angled left or right), when the part is true the stick won't wobble...the stick doesn't need to be perfectly aligned with the centreline to still have the same result
@@joshweier Ya I guess that makes sense
I am more than a little curious about what the point of this exercise was? I mean I see what you are doing, but I cannot figure out WHY you were doing it.
So why are we doing this? Are you going to face that center section?
That wobble stick is a disgrace…. ;)
Harbor freight should not be anywhere near this channel
super very best