В этом видео прекрасно всё. И то как кернят, а потом сверло уводит от этого отверстия. И термообработка. Заготовка, небось, упрочнена при прокатке. А теперь отпущена, но зато блестит. Главное, что люди хорошие.
Kamu sangat jago, mas Yanto! 👍👏Kamu paham banget sama teknik transformasi logam, dan bisa menguasainya dengan sempurna. Kerjamu tepat dan efisien banget buat bikin alat yang kamu butuhin. Kecepatan dan keahlianmu dalam bikin barang bikin gue ngerasa kagum banget. Gue belajar banyak nonton videomu, makasih ya udah share ilmunya!🤩🙋♂😁
Before CNC there was skilled labor. I would think the last step would be case hardening. Very creative with the indexing head. Necessity is the mother of invention. Enjoyed it.
Not all needs are respect, authorized and accepted by market/system :). Generally not need create invention, but proffit/gains/profitability :). Global/industrial/imperial monopoly know best which needs accept, finance, recommend :). Some needs are effect of concrete terms and conditions, policy, law :) "NEED" of global industry is use/exploitate/administrate cheap labor and decide about production, control production and all production/trade sectors :)
Not all needs are respect, authorized and accepted by market/system :). Generally not need create invention, but proffit/gains/profitability :). Global/industrial/imperial monopoly know best which needs accept, finance, recommend :). Some needs are effect of concrete terms and conditions, policy, law :) "NEED" of global industry is use/exploitate/administrate cheap labor and decide about production, control production and all production/trade sectors :)
You know what ? You can take the urine outta this idea - feel free BUT we have ALL come across this scenario of a odd or neboff job that needs a one time use (perhaps) socket Well folks HERE is your answer We are all from beginners to advanced “TURNERS” And have varying degrees of skill and imagination This FELLA HAS SHOWN US HOW to overcome a situation Top marks fella & Thank you 👍🏻
My friend, in the nineties did the same. It will be a little easier if you make a couple of hexagons ground into a cone. The first pass with an acute angle, the second with an obtuse angle.
As an Australian retired toolmaker good job done . However guys wear decent footwear and beware of lathes I witnessed a guy having his left arm torn off from his shoulder plus his left ear ripped off . Just be very cautious they are unforgiving and under estimated as killer machines .
There's a gory video on the Internet of a Russian guy killed by a lathe. His coat sleeve got caught and his whole body got pulled in and shredded. Absolutely gruesome.
@@davidkim4083 I saw the video...horrible death for the poor guy. It reminded me of an incident years ago in school. A guy had a scarf around his neck while operating a lathe. He knew better and everyone was clearly instructed about the safety and what NOT to do. Anyway, the damned thing got caught in the spindle while it very fortunately ran low RPM. The guy next to the idiot was aware of the situation and immediately hammered the emergency stop. The idiot returned to school after a few days off with a very clear strangulation mark around his neck. It was a while before he got near a lathe again and he was more than lucky nothing bad happened to him. Machinery in a pro workshop can kill careless operators!
Сразу видно что не русские ! Такой замудренный метод , сверлить шесть отверстий .... Столько "выёживаться ! Просто просверлил на 2 миллиметра отверсие больше чем нужный шестигранник и также нагрел и пробил шестигранником .А для плотности обстукал по окружности деталь на шестиграннике и всё .....! Вам никогда не победить нас Русских !
did the same in the 80's only for non standard bolts - but nobody does like this anymore in the 21st century its not accurate neither has the hardness or strength to withstand high torque, its is costlier less accurate and more time spent.
молодцы нормально делают ,но можно и не заморачиваться просто просверлить одно отверстие в центре нагреть на горне и забить шестигранник с начало конусный потом прямой ,когда то мы так наборы делали во времена дефицита.
Как-то не припомню про дефицит инструментов особенно при совдепии, я досих пор пользуюсь теми запасами, взял как-то набор метчиков , и плашек всех размеров штук 150 качество не Китай работает досих пор
@@georgeh9967 You severely underestimate the availability of tools (possibly tenth-hand used, but nonetheless there to be had) even in low-tech looking places. Ca Lem has a good video on this - you just shop at the tool flea market instead of a hardware store, and you buy what you can find, not necessarily what you came for. But make no mistake, in a place where a socket wrench truly is unobtanium, there are no functioning lathes.
@@AttilaAsztalos not in a position to walk to the corner hardware store.means. he is far from store /town. maybe rural. it is a saying. and in no way has or means anything about the tools he may have. he did use a lathe and various tools. and in fact has more than i have.
سلام علیک . همکار عزیز . میشه بجای اینکه بعد از تراش داخل جای شش گوش بکس تا یه اندازه که تراش زدی بقیه را با مته فرز انگشتی داخل را شش گوشه کرد . البته شما استاد ما هستید
Это конечно не Пакистан, трёхкулачковый патрон заготовку центрирует. И делительная головка какая-никакая - в Пакистане бы мелом шестиугольник разметили. Но есть же оправка в заднюю бабку для прошивки внутренних шестигранников.
А отверстие, где четырёхгранник надо делать больше, диаметр должен быть равен стороне квадрата. Если крутить болты то пойдёт, а вот гайки могут быть проблемы, т.е.торчачий болт не даст головке сесть на гайку. Много лишних сверлений, хватило бы двух и выбрать токарным . Ещё нужно учесть угловой разворот шестигранника и четырёхгранника по отношению друг к другу. Заключение: 1) хрень 2) купил магазине и нет проблем
а пальцем стружку это нормально ? Вообще греть открытым огнем поковку малого объема нельзя (выгорает углерод сталь теряет свойства) только в изложнице с засыпкой и калибр под ковку делают в три ! ТРИ ! этапа ... набор объема 1+упрочнение осаживание формы 2+калибровка размеров 3 ... и так далее . Вообще кованые ключи имеют место быть - но это ДИЧЬ.
Take good care of your lathe and she will take good care of you.....Very Well Done!!! : ) I can imagine hearing the complaints from a group of spoiled tool makers assigned to make that socket using your tools and techniques.
Наука
Not sure why it made me smile but all that intricate lathe work and then he bangs a bloody great bolt to make the hex. Brilliant.
He, he...same thought here. All that lathe work and then BAM! He bashes a bolt into the damned thing.
That put a smile on my face. You have my admiration.
Thanks brother ♥️
Gday, the hex looks perfect, it’s good to see a water bore going in, workshop is looking fantastic mate, cheers
Thanks brother Matty's ♥️
G'day Matty, fancy seeing you here mate lol, did this fella move shops? I haven't watched him in a little while
@@RalfyCustoms Gday, Yanto has started his own workshop, he’s going to do alright to mate,
In pratica tanto lavoro per creare una bussola che e5 doppia e debole
В этом видео прекрасно всё. И то как кернят, а потом сверло уводит от этого отверстия. И термообработка. Заготовка, небось, упрочнена при прокатке. А теперь отпущена, но зато блестит. Главное, что люди хорошие.
Terimakasih saudaraku ♥️
Kamu sangat jago, mas Yanto! 👍👏Kamu paham banget sama teknik transformasi logam, dan bisa menguasainya dengan sempurna. Kerjamu tepat dan efisien banget buat bikin alat yang kamu butuhin. Kecepatan dan keahlianmu dalam bikin barang bikin gue ngerasa kagum banget. Gue belajar banyak nonton videomu, makasih ya udah share ilmunya!🤩🙋♂😁
Terimakasih kangmas Dadier ♥️😍
Before CNC there was skilled labor. I would think the last step would be case hardening. Very creative with the indexing head. Necessity is the mother of invention. Enjoyed it.
There are easier ways to make a socket.
Not all needs are respect, authorized and accepted by market/system :). Generally not need create invention, but proffit/gains/profitability :). Global/industrial/imperial monopoly know best which needs accept, finance, recommend :). Some needs are effect of concrete terms and conditions, policy, law :) "NEED" of global industry is use/exploitate/administrate cheap labor and decide about production, control production and all production/trade sectors :)
Not all needs are respect, authorized and accepted by market/system :). Generally not need create invention, but proffit/gains/profitability :). Global/industrial/imperial monopoly know best which needs accept, finance, recommend :). Some needs are effect of concrete terms and conditions, policy, law :) "NEED" of global industry is use/exploitate/administrate cheap labor and decide about production, control production and all production/trade sectors :)
This guy is the real thing and i know he could make anything.
This was actually very cool to watch
Interesting handmade tool - respect.⭐️
Frank 🙋♂️ 🇩🇪
Thanks Frank ♥️
Vamos arriba hermano Messin muy bueno excelente, un Abrazo para ti y todos los hermanos Indoneses, desde Uruguay.
Jose Maciel Zamudio ♥️ 🇺🇾🇺🇾🇺🇾
Friend, your workshop grows every day, congratulations👍
Genius!! I love this stuff. So helpful and SIMPLE!!!
Thank you 🙏🏻
You know what ?
You can take the urine outta this idea - feel free BUT we have ALL come across this scenario of a odd or neboff job that needs a one time use (perhaps) socket
Well folks HERE is your answer
We are all from beginners to advanced “TURNERS”
And have varying degrees of skill and imagination
This FELLA HAS SHOWN US HOW to overcome a situation
Top marks fella & Thank you 👍🏻
Am ur fans from Nigeria. Am happy for u, keep it up
Thanks brother Okoro 🇳🇬🇳🇬
Como siempre, un trabajo extraordinario más
Gracias maestro saludos desde el Sur de Chile
🇨🇱🇨🇱 Hector ❤️
This guy is brilliant.❤ But I think it would be much cheeper to just buy one.😊
Estás muy joven y eres un genio Dios te bendiga siempre dándote más sabiduría...desde México
Terimakasih saudaraku ♥️ 🇲🇽🇲🇽
Capo Mekanik🙋🏿, saludos desde Argentina, felicitaciones por el taller nuevo ......👌👍
Thanks brother 🇦🇷🇦🇷🇦🇷
Ottimo lavoro, complimenti... Saluti dall'Italia👋
My friend, in the nineties did the same. It will be a little easier if you make a couple of hexagons ground into a cone. The first pass with an acute angle, the second with an obtuse angle.
До сих пор пользуюсь советскими инструментами , они стоили очень дешиво и было полно
Os meninos estão construindo um poço. Ótimo trabalho.
Terimakasih saudaraku ♥️
Hadir nyimak boss ku suksesselalu buatbossku 👍👍👍💪💪💪
brutal mis felicitaciones . saludos desde sudamerika
Lo felicito por su ingenio y destresa
Фанатизм - фантазия, грандиозно потресающи. Он без токарного станка на коленке всё зделает
Very nicely done 🇵🇰🇵🇰
very good job brother
Thanks brother Asturias ♥️
Excellent job..👍👍👍
Thanks brother Trapper
años que llevo queriendonver este video muchas gracias
Wow very nice idea good job
As an Australian retired toolmaker good job done . However guys wear decent footwear and beware of lathes I witnessed a guy having his left arm torn off from his shoulder plus his left ear ripped off . Just be very cautious they are unforgiving and under estimated as killer machines .
Do you live in Australia now?
@@Kenan_KARA Yes I do just be careful using powerful machines GOOD LUCK and be alert . Cheers
@@kevinklei3005 Thank you.Greetings from Antalia
There's a gory video on the Internet of a Russian guy killed by a lathe. His coat sleeve got caught and his whole body got pulled in and shredded. Absolutely gruesome.
@@davidkim4083 I saw the video...horrible death for the poor guy. It reminded me of an incident years ago in school. A guy had a scarf around his neck while operating a lathe. He knew better and everyone was clearly instructed about the safety and what NOT to do. Anyway, the damned thing got caught in the spindle while it very fortunately ran low RPM. The guy next to the idiot was aware of the situation and immediately hammered the emergency stop. The idiot returned to school after a few days off with a very clear strangulation mark around his neck. It was a while before he got near a lathe again and he was more than lucky nothing bad happened to him. Machinery in a pro workshop can kill careless operators!
Excellent job.
Thanks brother ❤️
Looks like some nice rain starting up.
Well, the first 6 minutes was exactly what I needed to make a revolver barrel. Thanks a lot.. :)
No, just kidding...
Meus sinceros comprimentos a os mecânicos torneiros grandes profissionais excelentes trabalhos,
Mantap udah punya alat sndiri good lah bang semoga makin sukses
Sehr schöne Arbeit 😍
Terimakasih Denis ❤️
Przepięknia jest ta zrobiona robota przepiękny jest ten cały pomysł z tą nasadką pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍👍
Сразу видно что не русские ! Такой замудренный метод , сверлить шесть отверстий .... Столько "выёживаться ! Просто просверлил на 2 миллиметра отверсие больше чем нужный шестигранник и также нагрел и пробил шестигранником .А для плотности обстукал по окружности деталь на шестиграннике и всё .....! Вам никогда не победить нас Русских !
7:48 That's really smart👍
Sin ninguna explicación le resta valor al trabajo
хороший кузнец без всякой токарки делает на раз.
now that's a perfect fit for the bolt 😂
Nice jnb from Pakistan
Thanks brother Shahzad
1:20 pretty scary welding 😢😂🫣
Fascinating stuff, I always wanted to see how SnapOn Tools were made.
wah.. 1 bulan gak mengikuti sudah punya bengkel baru sendiri ya kang... 👍👍👏👏👏
Iya kang.. terimakasih kang David..ini karena dukungan dari jenengan
Top-Job,Sir 👌
Thanks brother Adrian ♥️
Good video, also drilling a well, alright
Thanks brother Stewart ❤️
Nice!
Faltó forjarlo al final en aceite para que quedara con mucha dureza de lo contrario si se deja así se va a deformar o romper muy rápido
车床不是可以直接打六角孔吗？
your a genius
did the same in the 80's only for non standard bolts - but nobody does like this anymore in the 21st century its not accurate neither has the hardness or strength to withstand high torque, its is costlier less accurate and more time spent.
Great work
Good job.
That's why my socket set is so expensive!
Más bien pregunta, como hacen el huevo cuadrado
no they use a rotary broach for that this is only when you have no access to one
Sangat bermanfaat. Terimakasih.
I love this
Very good my friend😉👍
Отличная идея!
Nice work
Thanks brother ♥️ AR
Muchas gracias por este video
I get new idea .....thank you..
oops! It shrank when it cooled off.
Ud lama ga mmpir. Skrg ud punga mesin sndiri ya mas.
молодцы нормально делают ,но можно и не заморачиваться просто просверлить одно отверстие в центре нагреть на горне и забить шестигранник с начало конусный потом прямой ,когда то мы так наборы делали во времена дефицита.
Как-то не припомню про дефицит инструментов особенно при совдепии, я досих пор пользуюсь теми запасами, взял как-то набор метчиков , и плашек всех размеров штук 150 качество не Китай работает досих пор
Мы так и делали . Только ещё отбивали по окружности на шестиграннике ,что б плотней и чётче было.
Je dobré že na světě jsou řemeslníci co umí.
Excellent!! :)
Hola Mesi..m, estas perforando un pozo para extraer agua para la casa?, como vas a extraer el agua?, con un molino de viento?
Saya menggunakan mesin pak
@@Yantoo
Anda menggunakan pompa air submersible tipe pena
الف مبروك على الورشه الجديده الله معك
Aamiin.. Alhamdulillah ♥️
*REMEMBER THIS VIDEO the next time you buy the GIANT $7 Harbor Freight socket set*
Why
This isn’t even close to how retail socket sets are produced lol
@@philipmaclarenjr.2004
They are each and all produced that way!
Yyơyyttbpiôo
America 😅
Mas mau nanya itu ukuran lobang sama as nya sama ya mas?
Bonsoir, très ingénieux !!!
私はアルミホイールのセンターキャップを廻す工具が必要になった時に自分でソケットを作りました。2面巾６７ｍｍだったかな？私はフライス盤で作ったのですが、この動画の”熱”と”叩き込み”の方が簡単に出来そうですね。ただ私の場合、叩き込むものがアルミ製の美粧品でしたのでこの方法は無理だったと思いますが。
Mulțumesc pentruvideoclip 9:14
How many hours?
At 8:36 is when he hammers in the square die.
Well done
Você é mestre meu amigo, Anda adalah tuan teman saya
Terimakasih Horaldo ❤️
Pretty sure , the cost of electricity, and oxy/ acetelyne used, was more than what a nice, new impact socket costs.But.. gotta have fun.
does not look like he is in a position to walk to the corner hardware store
@@georgeh9967 You severely underestimate the availability of tools (possibly tenth-hand used, but nonetheless there to be had) even in low-tech looking places. Ca Lem has a good video on this - you just shop at the tool flea market instead of a hardware store, and you buy what you can find, not necessarily what you came for. But make no mistake, in a place where a socket wrench truly is unobtanium, there are no functioning lathes.
@@AttilaAsztalos not in a position to walk to the corner hardware store.means. he is far from store /town. maybe rural. it is a saying. and in no way has or means anything about the tools he may have. he did use a lathe and various tools. and in fact has more than i have.
Bengkel baru mas...punya sendiri ??
Iya mas Fauzy
Wah sukses...semoga makin rame...
Aamiin mas. Terimakasih support dan doanya mas
Now - call Biltema ! They selling stuff like this ! :-)
Thanks brother ♥️
Clever 👍.
Thanks brothers David
Basic, old school. That's how things was done before CNC, hydro-jets and order catalogs.
Hermosa mujer preciosa 😍😍😍😍
سلام علیک . همکار عزیز . میشه بجای اینکه بعد از تراش داخل جای شش گوش بکس تا یه اندازه که تراش زدی بقیه را با مته فرز انگشتی داخل را شش گوشه کرد . البته شما استاد ما هستید
Terimakasih saudaraku ❤️ ♥️
Untuk bahan stainless bisa pake cara yang sama mas ?
Как всегда все отлично!
Nice
Это конечно не Пакистан, трёхкулачковый патрон заготовку центрирует. И делительная головка какая-никакая - в Пакистане бы мелом шестиугольник разметили. Но есть же оправка в заднюю бабку для прошивки внутренних шестигранников.
very nice
Melhor do que a ferramenta original ! 👍
Sidney Ferreira ❤️
Karyamu mendunia bro. Yang coment kebanyakan orang luar negeri . Hebatt. Ada nomor tlp/WA BOS
Hey Yanto, are you guys sinking a well?
Wakodahatchee Chris
we made a well by drilling a hole in the ground at a depth of 29 meters brother Chris
@@Yantoo I thought I recognized that. Thanks!
Increíble!!!
ESO ES UN GRAN TRABAJO Y UNA GRAN INVERSION EN COSTO HOMBRE MAQUINA ., CONTRA COMPRAR UNO CON EL FABRICANTE . POR MUCHO MENOS DINERO.
А отверстие, где четырёхгранник надо делать больше, диаметр должен быть равен стороне квадрата. Если крутить болты то пойдёт, а вот гайки могут быть проблемы, т.е.торчачий болт не даст головке сесть на гайку. Много лишних сверлений, хватило бы двух и выбрать токарным . Ещё нужно учесть угловой разворот шестигранника и четырёхгранника по отношению друг к другу. Заключение: 1) хрень
2) купил магазине и нет проблем
😁🙏
это бедная страна... путинская рашка тоже идёт к такой же нищете...
а пальцем стружку это нормально ? Вообще греть открытым огнем поковку малого объема нельзя (выгорает углерод сталь теряет свойства) только в изложнице с засыпкой и калибр под ковку делают в три ! ТРИ ! этапа ... набор объема 1+упрочнение осаживание формы 2+калибровка размеров 3 ... и так далее . Вообще кованые ключи имеют место быть - но это ДИЧЬ.
@@путлер_в_Гааге чья бы корова мычала..
А ваша срана без помощи запада ,вообще ничего не может . Ну разве что обосрать кого нибудь из зависти!@@путлер_в_Гааге
Take good care of your lathe and she will take good care of you.....Very Well Done!!! : )
I can imagine hearing the complaints from a group of spoiled tool makers assigned to make that socket using your tools and techniques.
Thanks brother Jimenez ❤️