How to change the backup battery in a Simon XT security panel
HTML-код
- Опубликовано: 10 сен 2024
- How to change the backup battery in a Simon XT security panel. Part # 80-632-3N-XT
► Protect those you love at myalarmcenter.... or call us toll free at 844-MAC-SAFE.
► Contact us and find the right solution for you today: myalarmcenter....
I found this video in Aug 2020. After restoration from a 28 hour power outage at my house, our panel was beeping every minute or so, and the panel had a message that read something like, "console battery low". So, I just figured I needed to replace the battery and went searching on You Tube for a video that told me how to remove the panel and find the battery, etc (as I didn't have a manual). But this guy's suggestion - after watching the entire video - to contact our security provider FIRST, was a game changer for me. I went on to call the provider, told them about the power outage, they reset from their end, and within 30 seconds the beeping stopped, the message was gone, and the CSR told me that the battery DID NOT need to be replaced, and that it would recharge itself since the house power had been restored. So, this video kept me from a trip out to purchase a new battery. Thanks...very helpful for my circumstances.
Thank you for the help but also note once you change the battery you have to allow 24 hours for it to charge it will continue to say low battery after you replace it for the next 24 hours then it will be good
This one is identical to mine. I just ordered a new battery. The original lasted 3 years, 10 months. It was installed in early 2012, the date I see in this video inside the panel.
THANK YOU!
Your method is simplest and most efficient!
My original installer buried the alarm AC switch inside the wall, so I cannot turn the power off before the battery swap as others suggested. Your method bypasses this step and everything was a breeze.
Thanks for the video. With the rolling black outs due to that storm I found out all the batteries were bad. Changed them all and still had system low battery warning. Went into the system test, backed out, system OK!!
If the replacement battery is not charged, it might take a few hours to fully charge the battery. So, the low system battery message may still be there until the battery is charged.
Thank you!
This exact procedure will not work for the Frontpoint Security Simon XT. Additionally you have to unplug the panel from the wall outlet and unplug the RED wires that stick out of the bottom of the panel. Then reconnect the wall plug and red wires. I had to call customer support to get it right.
I am grateful for your observation... I spent several hours trying to make his directions work and came up empty. By disconnecting the power line and reconnecting completed the cycle the system needed to recognize the new battery. With different model it is critical to have the correct process... Thanks again for saving up a service call.
You're AWESOME! for the excellent presentation.
Thanks for the helpful video. Made changing my battery a snap.
We're glad to have made it easy for you!
Perfect instructions. It took me 5 minutes (or less)! Thanks!
Thank you. Great video
Excellent and simple instruction. Thank you
Outstanding, thanks
I've been using this kind of alarm for several years untill today but now I'm having a big trouble, it is beeping for new bateries at the moving sensor and the front door sensor, I've been changing both bateries and the main one!! Still it is still beeping beeping and beeping!!! Fow new bateries, and I've change them four times!!... i dont know what else to do !!! IT is driving me crazy!!!!
Great video, saved me a lot of money. Thanks 👍
Excellent. Thank you!
excellent video, thank you so much.
Thank you. Very helpful!
Thanks for the helpful video
Thank you, the last guy I watched didn’t say anything about the screw and I ripped the fucking thing off the wall
Thank you, thank you, thank you!
Very helpful.
My battery required a charge. After battery install, the status light remained on and the alarm light next to it was blinking. I am assuming this is related to the low charge battery system
notification.
After changing my battery everything was okay for one evening. the next day I turned off my alarm in the morning and I noticed about an hour or so later my alarm system was dead. What could have happened?
Thank you!!
Thank you! This was spot on!
great video very helpful!!
Thank u 😉
Where can we find the battery to replace it? Or do we have to charge it and if so how? Thanks in advance
Hello, thank you for your inquiry. You can purchase the battery at many online stores (i.e. Amazon) if you search for part # 60-914. If you have any additional questions, you may call us at 866-484-4800 and we’ll be happy to assist.
After connecting the battery I still had the low battery alarm so I had to power down the ac power supply before connecting the battery. It must reset the system from having the low battery alarm by powering down the whole thing. Then after connecting the battery then plugging in the ac power supply all alarms were gone.
same for me as I commented above.
I follow the steps and it works thanks
where did u order the battery from?
UP MY SLEEVES
The battery does not pop in or out easily 😕
I have a used to have a Simon xt from front point
how are the battery charged up?
If it's still reporting a low battery after the new battery is in. A sensor test may need to be ran to resolve the issue.
This fixed it. Thanks!
5 yrs later and this did the trick. thank you
Where can I buy the battery
Days after changing the battery the annoying "system low battery" alarms kept going off. I checked the voltage and it was at 7 volts so battery was well charged. Pressing disarm and status didn't change anything and the frustration continued. Because it happens every 4 hours my sleep was interrupted for over a week. I wanted to take a hammer and smash the panel to bits! Over the weekend I did a sensor test and that made things worse because on of the sensors now gave a tamper error that wouldn't go away even though the lid was put back on securely. I was about to delete everything and start from scratch, feared the motherboard was defective..... BUT I didn't give up and removed the panel completely from the wall for a while to inspect things on the inside. After powering back up things FINALLY went back to normal. OMG What a NIGHTMARE! I now hate my simon XT and next time it gives me trouble I am replacing with a more modern 317MZ unit so I can still use the existing sensors. (Nice touch screens on the market now.. I now know why interlogics went out of business! Simon XT is obsolete garbage! Posting this incase some poor soul runs into the same issue. Good luck and thanks for the video!
is there any way to re charge the battery?
To close my panel, I had to put the top in first.
Changed it out, then the keypad wouldnt work to disarm it.
Why does it take five minutes to show how to open the panel, take the old battery out, and then put the new battery in? Took me one minute.
Some of us visual learners and need to see each step.
Some people need more
the video image is too poor, you need to fix it more
6542 is the code
Isaac Zavala ..lol
very helpful. thank you!