Magnus GTR VR38 Billet Intake Manifold Assembly

Assembly of the Magnus Nissan GTR R35 Billet Intake Manifold
▶︎ Buy it now! 🔗 www.magnusmoto... 🔗
▶︎ Nissan GTR Parts 🔗: www.magnusmoto...
▶︎ Watch the record breaking Ekanoo GTR 🔗 • What does it take to b... 🔗
▶︎ Check out the Magnus HQ:
www.magnusmoto...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
▶️ ABOUT THIS VIDEO:
The official video how to assemble this intake for your R35 GTR
The all Billet 18 Injector Manifold was developed while we were campaigning for the world record EKanoo Racing R35 GTR 2015 - 2017 Seasons of the BDRC, where the car was half a second ahead of its competitors at the time, producing well over 2600 hp. Fuel demands and airflow requirements reaching over 90 psi of boost pressure began to show uneven cylinder distribution in other manifolds. Using the same CFD technology and over 20 years experience in designing intake manifolds with less than 1 percent differentiation between cylinders, we were able to apply this knowledge to develop the absolute best flowing intake manifold on the market.
While in design we addressed the fuel demand issue and made a -10 fuel rail that was adequate to flow over 25,000 cc/min of fuel, while again running through complex CFD simulations. The fuel rail was carefully modeled to not have fuel starvation or pulsation issues as with current -6 fuel rails. High Flow injectors required a redesign of the rail which was scaled up to run -10 to accommodate up to a 4000hp fuel system.
This intake manifold has proven itself to be able to run over 214 mph and produce a record shattering 2700hp on the chassis dyno of T1 Racing Development. Available in the anodized color of your choice, also available with dummy injectors for future fuel use as your fuel demands grow.
Used in some of the Top GTR R35 street and race machines, because of its versatility with dual fuel systems. 12 injectors up top and 6 down low allow you to run pump gas and switch to alcohol on high boost seamlessly, allowing the best of both worlds. Alternatively you may run original size (or larger) injectors down on the first bank to have a perfect idle quality down to an original 800 RPM, then stage to larger injectors.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
FOLLOW US 🤝
IG ✅
/ magnus_motorsports
FB ✅
/ magnusmotorsports
X ✅
/ magnusmoda
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
🔥 Magnus Latest 📺
McLaren 720s M840T +1xxxHP Beast:
✔️ • McLaren 720s M840T +1x...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
📥
Filmed/Edited by Matt Mariani
IG: Mvtt777
#Magnusmotorsports #GTR #R35

[@chzpuffs1835]

Should change your name to Marco Picasso because that shit looks like pure art y0

[@Magnus_Motorsports]

👨🏻‍🎨🖼️

[@tomthompson7400]

Wow ,,, that looks expensive ,, very very sweet , and very very expensive.