The Lancer has been sold: ruclips.net/video/aZ49a9l8Twc/видео.htmlm7s There won't be another episode of Lancer Fix unless there is another Lancer that I can work on.
Saludos conpañero, quiero agradecerte por hacer estos videos, ya que estos aparte de complicados conyeva mucha paciencia y es por ello que te agradezco. Yo tengo ese mismo vehículo y siempre veo tus videos; asi que espero que continues con esto y que puedas crecer enormemente.
Hey Mackey. I know it's been a while since you've sold the Lancer, but I wanted to say thanks. I had a Lancer just like the one you did, and while I have parted ways with it, your videos helped me tremendously. I didn't do everything you did, but everything I did was with the help of these videos. Thank you. I think I sold my Lancer just before you did, since I replaced it with a 17 Tacoma
selective environment Greetings, I want to thank you for making these videos, as these other complicated conyeva lot of patience and that is why I thank you. I have the same car and I always see tua video; so I hope to continue with this and you can grow tremendously.
Cheers mate, I want to thank you for make this videos, because they're so complicated and it takes a los of patience, that's why I tanks you. I have the same car and I always see your videos. So I hope that you continue with this and also grow up tremendously. * (That's the right traduction, don't thank me. LOL)
the solution came to mine in the form of auto body work. the area behind the firewall under the windscreen was rusted so badly water was flowing inside the car. welding, joint sealer and priming then sprayed to match car color. had to remove evaporator and blower fan to get to the inside of the firewall to repair also. so check for rusted areas on firewall
can you explain more on what the fire wall is on the car? dont know much about cars but im learning every video i com across on how to fix my 2002 lancer ac problems
hey, thanks bro. I followed all your lanser videos, i just bought one last month, but I have a question about AC compressor wires, my are disconnected, and I don't have ac. can you please do a diagnostic on ac systems?
hey whats up bro? Good video!! i just bought 06 lancer ralliart picking it up from the dealer in few days and sold my 03 lancer es like urs just wanted to no if u think the 06 ralliart is any good?
Just making sure. The blower is what pushes the air out to the vents, right? My Lancer's A/C turn on but no air comes out and I think it's the blower. Just double checking before I buy.
hey man, how are you? i want to know how to install a rpm tachometer in my lancer 2002. could you tell me how to do it? i have problems with the green cable and red cable too. thank you. have a nice day
Haha I know it sounds like a menial question lol but I didn't see anyone saying why the would or why they didn't. I did have one cabin once and I noticed a difference. For my specific lancer, at least, it didn't feel better. A little opposite actually so I took it out. I still have the OEM cold duct intake. I'm just sticking to that I think too for the future 👍
hey real quick did doing the drain pipe on the outside help with the flow strength out of the vents? I'm thinking of cleaning my evap core and wonder if that would help fix the weak ac flow
Im having water leak on the driver side, any idea why this can happen. I was cleaning my car a week or two ago and noticed it was wet, i just assumed i spilled water and dried it up. This morning i found it soaking even more than before :(.
Hi, I came across this video when I was trying to understand what's the use of an angled black tube connecting the blower motor bottom section to somewhere above (in your video 2:29, the angled black pipe) in my car. I could see that your car too has the same pipe (2:29). Could you please explain what this pipes connects on the other end?
while looking up drum brake parts for my 05 Mitus Lancer ES, i've noticed there are "brake shoes" and "parking brake shoes". the pics for both shoes online look very similar, but i am assuming the two shoes are not the same? thanks.
My 2003 Lancer just started leaking on the passenger side. It would randomly spray water. It seems like after researching what could possibly be wrong that it might be caused by AC overflow being clogged, which is what brought me to this video. Will this video help with a 2003 Lancer?
***** If you look closely in the video. I tried to look up on the top of the blower motor housing, there is no ac filter. I actually try to find one, but turned out these Lancers are "US version" and they don't have ac filter. It's too bad, they went cheap on it.
hi man i have big problem please i need help from you i lancer 2010 the motor no different from this motor the same your motor 8 year never use the heater at now only use air condition at hot the problem is Leaking radiator water inside the car park and Water falls on my legs when driving and Water of the radiator comes out the discharge hole of the air conditioner every 1 hour add water to radiator thank you for looking
So i just Changed my 02 sensors the check engine light went off now but when i start it theres a big clunk and its like the motor shaking but its responsive now and i have power back so i guess driving with power loss do you think i didnt notice the motor mounts are trash ? Im hoping the motor mounts are whats causing that start up shake Also Underneath my exhaust pipe is like crimped like smashed up its the worst exhaust pipe youll ever see
My drain pipe got stuck in between the fire wall and that foam peice lol all i had to do was pull it out but it took me hours to find cuz it was stuck in there and i couldnt locate it🤣
Can you help? my lancer engine 4g18, start with 800 rpm as normal, temperature measuring screen will show warm arround 8 minutes (soon) after starting up and keep it (not over hot), and when engine is warmer and warmer, rpm will inceasing time by time and fix arround 1400 rpm. Gara shop requires to replace IAC valse, PCV valse, 1 coolant temperature sensor (there're 2 temperature sensor with this Lancer) but still not improve. Pls help.
@@DarkDragonWing Thankyou so much for your reply. This lancer with engine 4g18, 1.6L, asia version, so, it hasn't got O2 sensor, krab. Shop've just replaced thermosat also for checking, but still not any change. ODB2 for this car is not popular, so it's hard to check. Coolant fan still Ok. I don't know wether there's any problem with electric wire/ or ECU/ other things else.
Diagnosis TechsThey said ( P0302 ) Cylinder 2 Misfire Detected.? Something About My Coil.? What Does that Mean? Change it.? Help Muchly Appreciated Thanks Hello Now my car still bogs out after I change the valve cover gasket & tube seals... surely now last thing to change is my coil... 🤦♂️🙇♂️ Gladly Appreciate Anyone/Someone Help Please Thanks Much
@@DarkDragonWing Ok I'm awaiting for my parts that I order & also changing my air filter... once I replace my tube seals & gasket rocker seal cover, do I clean the spark plug tube #2 to check for more oil or take out the plug 1st then pump out the excess oil that seap in the spark plug.? Thank You Awaiting for your prosperous response...
@@DarkDragonWing Also, may I kindly ask on the back side wheels area of my vehicle 2002 1.6L Mitsubishi Lancer is Getting Bold From the inside tires.? Which Part do I Replace to Purchase.? Muchly Appreciated for A Prosperous Response... thank you
The Lancer has been sold: ruclips.net/video/aZ49a9l8Twc/видео.htmlm7s
There won't be another episode of Lancer Fix unless there is another Lancer that I can work on.
That's sad. :(
😭😭😭 the lancer is such a beauty.
So Long Lancer...
My Lancer is now 21 years old (2002 OZ Rally) and your videos are so super helpful. Thank you!
I love these videos. Sad that its sold but you gave alot of knowledge for free! Thank you 🙏🏼
DUDE THANK YOU THANK YOU THANK YOU SOOOO MUCH I JUST STARTED HAVING THIS PROBLEM AND I DIDNT KNOW WHAT IT WAS, DUDE THANK YOU SO MUCH!!!
Saludos conpañero, quiero agradecerte por hacer estos videos, ya que estos aparte de complicados conyeva mucha paciencia y es por ello que te agradezco. Yo tengo ese mismo vehículo y siempre veo tus videos; asi que espero que continues con esto y que puedas crecer enormemente.
Hey Mackey. I know it's been a while since you've sold the Lancer, but I wanted to say thanks. I had a Lancer just like the one you did, and while I have parted ways with it, your videos helped me tremendously. I didn't do everything you did, but everything I did was with the help of these videos. Thank you.
I think I sold my Lancer just before you did, since I replaced it with a 17 Tacoma
Nice work again man.
you can probably build a vehicle for yourself, keep up the excellent work
thank you soooooo much. had this problem for a while
Thanks for your help and support with this tutorial, excellent...
Hey maki
i am from georgia
i love your videos and your project
ซ่อมรถจริงได้ด้วย สุดยอดคับ
love your videos man keep up the good work
selective environment Greetings, I want to thank you for making these videos, as these other complicated conyeva lot of patience and that is why I thank you. I have the same car and I always see tua video; so I hope to continue with this and you can grow tremendously.
Cheers mate, I want to thank you for make this videos, because they're so complicated and it takes a los of patience, that's why I tanks you. I have the same car and I always see your videos. So I hope that you continue with this and also grow up tremendously. * (That's the right traduction, don't thank me. LOL)
Well Done Bro....best tutorial💙
Nice video!
Good very Good, thanks.
yesssss brother. nice work 👍 👍 , thank for sharing
really thank u very much. i will do it tomorrow :)
Excelente.👍
Nice Tshirt
tu si que tienes talento con las tuerqas, te felicito pd: good car :D
ive checked all the fuses in the fusebox thats in the hood and that are under the steering wheel and they all seem fine. thanks for thr reply 👍
nice work
Nice hair cut bro!
Thanks bro it really works ♥️👌
@DarkDragonWing when you will put the turbo on the e30
Your video just saved me from spending 3500Php hehe thanks bro
I like your new hair :p
thanks
the solution came to mine in the form of auto body work. the area behind the firewall under the windscreen was rusted so badly water was flowing inside the car. welding, joint sealer and priming then sprayed to match car color. had to remove evaporator and blower fan to get to the inside of the firewall to repair also. so check for rusted areas on firewall
can you explain more on what the fire wall is on the car? dont know much about cars but im learning every video i com across on how to fix my 2002 lancer ac problems
Hey. I have a Mitsubishi Lancer 2005 and you can tell me what the abuser of the ignition coils ride
Toma tu like Mackie 😎
Wow Good
tu eres el mejor :)
Thank you your video was helpful
hey, thanks bro. I followed all your lanser videos, i just bought one last month, but I have a question about AC compressor wires, my are disconnected, and I don't have ac. can you please do a diagnostic on ac systems?
Hi nice video
Just add the air filter now. And will be perfect. Nice jobs.
thanks I needed it.
Thanks for the video
hey whats up bro? Good video!! i just bought 06 lancer ralliart picking it up from the dealer in few days and sold my 03 lancer es like urs just wanted to no if u think the 06 ralliart is any good?
Hey not much. Yes that one is good too. I think it's pretty much the same as the 2002 models up, but with more upgrades. So yeah, good car.
great vid.
Good Morning Sir, I would just like to asked if its the same for carb type? Mitsubishi Lancer 97. Thank you
Genius
Just making sure. The blower is what pushes the air out to the vents, right?
My Lancer's A/C turn on but no air comes out and I think it's the blower. Just double checking before I buy.
That is the hardest god damn screw to get out!!!!
Maggy bro...hope u well...I was jst wondering, how many gearbox sensors on a 4G93 engine LANCER..? I need to fix mine.
Does the AC water drain pipe lead directly from the blower motor?
Can you help? in my lancer the air conditioner blinks and does not always blow cold air. what's the matter? I like your job
hey man, how are you?
i want to know how to install a rpm tachometer in my lancer 2002.
could you tell me how to do it?
i have problems with the green cable and red cable too.
thank you.
have a nice day
Here is how.ruclips.net/video/sCknRSve5SE/видео.html
Here is where you can find the wires you need
ruclips.net/video/uZneNuoub5Q/видео.html
Sir, what you call that orange wrench and that size
Thanks
Hello Mackey! What did you chimical use for clean the blower? In the video i saw two product! Greetings!
Just buy a new blower. lol Not worth cleaning. New one is pretty cheap. Anyways, I use an electrical cleaner spray.
sempre inovando
Hi Mackie! I'm wondering if you've ever installed a cabin air filter. I don't see why I would since factory had sealed the section?
Nope, but I could have. Here is how: ruclips.net/video/HjtEB_plHRs/видео.html
Thank you. Maybe good for the summer time heat. Would you recommend it? Or is it not necessarily necessary?
@@AlexanderMedina1010 Don’t need it. It just filters off some dust. It's up to you.
Haha I know it sounds like a menial question lol but I didn't see anyone saying why the would or why they didn't. I did have one cabin once and I noticed a difference. For my specific lancer, at least, it didn't feel better. A little opposite actually so I took it out. I still have the OEM cold duct intake. I'm just sticking to that I think too for the future
👍
how the heck did you get that back screw out from the blower motor? was it that orange ratchet screwdriver or 2nd tiny one?
A little bit of both. I struggled too.
@@DarkDragonWing dude I just gave up 😅 but then again my oz rally never came with a cabin filter
hey real quick did doing the drain pipe on the outside help with the flow strength out of the vents? I'm thinking of cleaning my evap core and wonder if that would help fix the weak ac flow
@@rynwolf286 Yes, it helped a lot. That is the main fix, to be honest. I don't know if the cleaning the core will help though.
Hi. Please suggest what to do when floorboard on Driver's side is wet. I have Lancer 02. Thanks a lot
I'm not sure. Water has to come from somewhere.
Should the Ac be on while unclogging the ac duct on firewall???
Probably not.
Thank you. Is there any real danger if I go to far with a zip tie?
@user-hv9bx6yp4g Go as far in as you can. You will most likely just hit a dead end and can't go in any further.
Thank you very much Mackie. I will definitely try. Dollar tree has this like foot and a half long zip tie set over here with something like 10ct 👍
Im having water leak on the driver side, any idea why this can happen.
I was cleaning my car a week or two ago and noticed it was wet, i just assumed i spilled water and dried it up.
This morning i found it soaking even more than before :(.
Hmm. Keep driving, for now, see if it will all go away. Otherwise, you can do what I did in the video to unclog the drain.
Hi, I came across this video when I was trying to understand what's the use of an angled black tube connecting the blower motor bottom section to somewhere above (in your video 2:29, the angled black pipe) in my car. I could see that your car too has the same pipe (2:29). Could you please explain what this pipes connects on the other end?
Hi. I'm sorry, I have no idea too.
muito bom
You should try a making a lowrider car that has hydraulics
How much do you work on the eba ??
Not a lot
hey brother will you be able to make a video how to clean an evaporator
I'm not sure. This is all I got: ruclips.net/video/YrV4wiC6D7w/видео.html
your e30 is your project car right?
Yes
while looking up drum brake parts for my 05 Mitus Lancer ES, i've noticed there are "brake shoes" and "parking brake shoes". the pics for both shoes online look very similar, but i am assuming the two shoes are not the same? thanks.
They should be the same
Thnx
I need changed my AC compressor Mitsubishi lancer 2003. PLease you have the video explain the process
Quick question: how much should be the ac low pressure when the compressor kicks in????? Is it 30psi??? Please confirm
I have a 2004 lancer
Sorry I don't know
What did you use to unclog the ac duct drain mack??
Just some wire will do. I used some big zip ties.
Okay cool. Thank you 🙏
My 2003 Lancer just started leaking on the passenger side. It would randomly spray water. It seems like after researching what could possibly be wrong that it might be caused by AC overflow being clogged, which is what brought me to this video. Will this video help with a 2003 Lancer?
ในคลิบมันคือการทำอะไรหรอครับพี่
Can you change the rear motor mount. I see your engine moves when you rev it up. It is a common problem and it looks like it's going to be a pain.
I would let the mechanic do it. It shouldn't cost much
pls buy a new rc chasis for the next rc modify.
What is that small orange tool you used where can I find it?
Mini Ratchet Wrench amzn.to/3qMRRk2
Thinks
Would this cause your blower to not work?
yes
The back screw is a hard to get spot any recommendations
You will have to struggle through it
is there anyway on fixing the blower motor without replacing it
Not that I know of yet.
have you replaced your cabinet aire filter?
***** No, there is none. These cars don't have one.
I thought it does
***** If you look closely in the video. I tried to look up on the top of the blower motor housing, there is no ac filter. I actually try to find one, but turned out these Lancers are "US version" and they don't have ac filter. It's too bad, they went cheap on it.
hi man
i have big problem please i need help from you
i lancer 2010 the motor no different from this motor the same your motor
8 year never use the heater at now only use air condition at hot
the problem is
Leaking radiator water inside the car park
and Water falls on my legs when driving
and Water of the radiator comes
out the discharge hole of the air conditioner
every 1 hour add water to radiator
thank you for looking
So i just Changed my 02 sensors the check engine light went off now but when i start it theres a big clunk and its like the motor shaking but its responsive now and i have power back so i guess driving with power loss do you think i didnt notice the motor mounts are trash ? Im hoping the motor mounts are whats causing that start up shake Also Underneath my exhaust pipe is like crimped like smashed up its the worst exhaust pipe youll ever see
You can try cleaning the EGR ruclips.net/video/YrV4wiC6D7w/видео.html
Is the ac blower is free will ? Cuz mine is a bit hard to spin :( how can i free will it again? , tnx in advance cheers
Buy a new one
Can anyone answer this, is it possible to change the grill/hood? I have a 03 lancer es manual, I’m hoping i can
Yes, you can. There are aftermarket hoods out there you can use.
hey on my lancer my hazard button and none of my turning signal lights work. what can be the possible problems for this?
Check the fuses.
I can't come back to reply, you will have to start a new comment if you have any questions or concerns. Cheers
Do more rc plz
if u do 2:11 u burn the bearings is not good!!!!!also u are good!
I have water dripping sometimes where my foot pedals are in my car . Mitsubishi lancer ex 2013
blower motor goes bad in these every other year or so, haven't had the ac drain plug yet.
is lancer your car?
yes
My drain pipe got stuck in between the fire wall and that foam peice lol all i had to do was pull it out but it took me hours to find cuz it was stuck in there and i couldnt locate it🤣
Can you help? my lancer engine 4g18, start with 800 rpm as normal, temperature measuring screen will show warm arround 8 minutes (soon) after starting up and keep it (not over hot), and when engine is warmer and warmer, rpm will inceasing time by time and fix arround 1400 rpm. Gara shop requires to replace IAC valse, PCV valse, 1 coolant temperature sensor (there're 2 temperature sensor with this Lancer) but still not improve. Pls help.
Have you tried replacing the O2 sensors? Make sure to use Denso brand. Watch here: ruclips.net/video/YrV4wiC6D7w/видео.html
@@DarkDragonWing Thankyou so much for your reply. This lancer with engine 4g18, 1.6L, asia version, so, it hasn't got O2 sensor, krab. Shop've just replaced thermosat also for checking, but still not any change. ODB2 for this car is not popular, so it's hard to check. Coolant fan still Ok. I don't know wether there's any problem with electric wire/ or ECU/ other things else.
Did you sold the car
yes
Your not gonna make a RC modify 23😞😞
Coming soon
Awwww I love your video I always repeat that video😞😔
this is vers dirty and this car is for sale yes or no maki
vc postava vídeos diariamente agora ta demorando um monte para postar
Diagnosis TechsThey said ( P0302 ) Cylinder 2 Misfire Detected.? Something About My Coil.?
What Does that Mean?
Change it.?
Help Muchly Appreciated Thanks
Hello
Now my car still bogs out after I change the valve cover gasket & tube seals... surely now last thing to change is my coil... 🤦♂️🙇♂️
Gladly Appreciate Anyone/Someone Help Please Thanks Much
Change the coils.
@@DarkDragonWing
Ok I'm awaiting for my parts that I order & also changing my air filter... once I replace my tube seals & gasket rocker seal cover, do I clean the spark plug tube #2 to check for more oil or take out the plug 1st then pump out the excess oil that seap in the spark plug.? Thank You Awaiting for your prosperous response...
@@DarkDragonWing
Also, may I kindly ask on the back side wheels area of my vehicle 2002 1.6L Mitsubishi Lancer is Getting Bold From the inside tires.? Which Part do I Replace to Purchase.? Muchly Appreciated for A Prosperous Response... thank you
how can you fix a lancer that just turn off when you put it on park & it doesn't trun on anymore. what can be wrong with the car? . "05 lancer"
Is it still cranking?
Yes
I want to change the all motor & transmission what will you recommend me to put on my Lancer?
Luis Angel Arzola I would say the 4G63 will be good
Все ни как не пойму, что он там в конце говорит?
e30
first
-to get beat up by his parents
4