This dude right here's the best Lancer Fixer on the tube,, Iv'e had my Oz rally for 4 yrs now and have always come back to your channel for support,, here every owner Iv'e come across has had this same issue with the control stems breaking eventually,, seems to be air bubble pockets when casting the molds,, typical problem with these applications. Ether way thanks Mackey for the extremely helpful and insightful videos you bring to the lancer community :]
Your channel is a must watch for old lancers like myself. Thank you for your support to the community. Your video length and clean presentation contribute greatly to the assistance you provide.
Dude thank you SO MUCH my dealership tried to charge me $1600 for this exact job, and my local garages would either not do the repair or they were charging an equally ludicrous price.
You just saved me a ton of effort and possibly cost if I had to take this to a mechanic. My knob was jamming and this video showed me where the gears were and it was a 20 second fix. Thank you.
Your starting to get so many more subscribers now and you deserve it your videos are really interesting and fun to watch!! I've been subbed for a bit over a year now and have loved all of your videos. Great job
I need this material; 1 Unit Genuine Mitsubishi 2004 Outlander Air Conditioner Heater Control Link Gear (7801A110) 1 Unit MITSUBISHI OEM 02-07 Lancer Cluster Switches-Knob (MR500925) 1 Unit Mitsubishi 00-05 LANCER - AC Heater Climate Control Panel Knob Shaft Stem Pin
I also have a problem with my Evo 8 heater control knob. There is a kink in the cable which prevents it from moving the gears so I have to reach under there to change it from hot to cold and back. I've had the replacement cable for like 2 years now and havent tried to install it because I had no idea how.. Now I know, and knowing is half the battle! Thanks.
Thanks man your videos help a lot on my lancer. My air bags got replaced and the mechanic did not connect my ac back together properly, I had no cold air blowing watched your video pulled my ac apart just like you did and bamm see the ac button cords are not connected coneected cords and working perfect. Thanks maki
Dear DarkDragonWing, I have to tank you A LOT because if it wasn't for you I could not have a driving car any more. The pensions are so small, people can not pay for anything else beside a room and food. THANKS TO YOU AND THE KINDNESS OF OTHER MECHANICS IS THAT WE STILL DRIVE, move around for errands and go for groceries!!! GOD BLESS YOU MAKI!
Thanks helped me alot your old one helped me too these gears are such pos only lancer owners would know what pos the heater/ac controls are. JDM heater/ac controls are so much better
control cables being like bicycle brake cables using teflon lubricant from bike shops on the steel wire might help reduce the friction. this and PTFE grease like ultimox 226
Сломался тросик на печку, вылечил так. взял стальную проволку 1,5 мм отмерял по тросу, выгнул кольца промазал посадочные штыри и поставил в место троса сейчас все замечательно переключает
Hi Mackie, Looks like you have an AC/ heater blend door issue (TSB-055-003). It is really tedious to replace it. I would love to see your video on it. Thanks
Were can i get that gear that goes on the middle of the two new gears you put and greased? Its the one that opens the compartment to either send heat or cold
Just found this good vdo. My lancer cannot turn on ac blower on speed 1-3, but just only 4 can operate. I found the root cause should be blower resister, but I don't know where is it? Could you please help, or any recommend?
Your videos are very helpful. Thanks alot. I'm the proud owner of a cs3 2004 lancer. Are those bulbs t5? The one on the lower right side in mine is blown. I would like to know which led bulbs to order. Thanks alot.
hey i just was doing my now..helped alot!! on last problem is that when i hooked up the black cable back to the link arm,once i switch my knob to cold or hot the cable in the bottom wont push the pulley (link arm)up or down..do i need a new link arm? or what would the problem be?
Hi need some help. That little piece that aligns the shift gears on 4:04. What is it called? Mine isn't shifting properly and isn't loose like yours. Do I need to replace that to? Because my gears aren't shifting properly after replacing the pieces. Thank you.
Hi how are you... your videos are really good.. i change the gears but the knob is still hard doesnt move. what is really hard is the gear that is in the car already the box that you clean and put glue, you think is any problem inside of it or i just have to buy the wire link... i dont know what to do .
You have to replace this: rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575273973&campid=5338044275&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FGenuine-Mitsubishi-A-C-Heater-Temperature-Blend-Door-Repair-Kit-Lancer-Outlander-%2F201259997216%3Ffits%3DYear%253A2003%257CModel%253ALancer%26hash%3Ditem2edc07d820%3Ag%3Afk8AAOxyTyBSWG6P%26vxp%3Dmtr
Hola.. disculpa, yo tengo ese mismo auto y el mismo problema: pero esa perilla que cambiaste , el selector de temperatura, es demasiado duro. Solo puedo moverlo desde el engrane. ?que me recomiendas hacer? .. puedes ayudarme ?
I went to the dealer to buy the white shaft to the far left nob. They ordered the center shaft (47.00) that I didn’t need and couldn’t return. They didn’t have a part number for what I needed. You show correct no
I still had too much heater control knob resistance and have to revert to maneuvering the gears by hand. I bolted an 8" long steel bar (3/4" wide by 1/8" thick) to the rearward gear so I can easily reach down while driving to adjust the temperature. Bend the bar towards the tunnel to keep it out of the way of your throttle foot.
what if that gear is stuck underneath the steering wheel?
You might want to look into how to replace the A/C Heater Temperature Blend Door.
ebay.to/2LjJfhM
This dude right here's the best Lancer Fixer on the tube,, Iv'e had my Oz rally for 4 yrs now and have always come back to your channel for support,, here every owner Iv'e come across has had this same issue with the control stems breaking eventually,, seems to be air bubble pockets when casting the molds,, typical problem with these applications. Ether way thanks Mackey for the extremely helpful and insightful videos you bring to the lancer community :]
Your channel is a must watch for old lancers like myself. Thank you for your support to the community. Your video length and clean presentation contribute greatly to the assistance you provide.
Dude thank you SO MUCH my dealership tried to charge me $1600 for this exact job, and my local garages would either not do the repair or they were charging an equally ludicrous price.
That's Crazy!
You just saved me a ton of effort and possibly cost if I had to take this to a mechanic. My knob was jamming and this video showed me where the gears were and it was a 20 second fix. Thank you.
My daughter has been trying to fix the twisted cable in our Lancer and said this video was the most helpful for her.
Been waiting for someone to post a detailed video about how to do this. THANK YOU MACKY.
+Isaac Machon Cheers!
You make my life so easy, I am blessed your channel exists sir.
Your starting to get so many more subscribers now and you deserve it your videos are really interesting and fun to watch!! I've been subbed for a bit over a year now and have loved all of your videos.
Great job
+yoAlpha15 Thanks a lot, cheers!!
This fixed my outlander 2003 as well! It's the same system. Thanks a million!!!
AC Climate Shaft Stem Pin
eBay goo.gl/vjmIpM
Lancer A/C Heater Control Gears 7801A110
eBay goo.gl/ayZzW9
Amazon amzn.to/2n8Tw6f
MR500925 Big Knob
MR500926 Small Knob
eBay goo.gl/ysLGNf
I need this material, but ebay and Amazon can not ship to Turkey. Can you help me
I need this material;
1 Unit Genuine Mitsubishi 2004 Outlander Air Conditioner Heater Control Link Gear (7801A110)
1 Unit MITSUBISHI OEM 02-07 Lancer Cluster Switches-Knob (MR500925)
1 Unit Mitsubishi 00-05 LANCER - AC Heater Climate Control Panel Knob Shaft Stem Pin
DarkDragonWing ii
I have 2 questions:is this same sistem for pinnin pajero and how to fix door handle from insside it wount open...Thnks
fixed my knobs today following your video!
Many thanks!
I also have a problem with my Evo 8 heater control knob. There is a kink in the cable which prevents it from moving the gears so I have to reach under there to change it from hot to cold and back. I've had the replacement cable for like 2 years now and havent tried to install it because I had no idea how.. Now I know, and knowing is half the battle! Thanks.
GREAT to see you uploading more again!
Thanks man your videos help a lot on my lancer. My air bags got replaced and the mechanic did not connect my ac back together properly, I had no cold air blowing watched your video pulled my ac apart just like you did and bamm see the ac button cords are not connected coneected cords and working perfect. Thanks maki
Thank you so much brother. i cant thank enough how much time and money your video saved me. bless
Dear DarkDragonWing, I have to tank you A LOT because if it wasn't for you I could not have a driving car any more. The pensions are so small, people can not pay for anything else beside a room and food. THANKS TO YOU AND THE KINDNESS OF OTHER MECHANICS IS THAT WE STILL DRIVE, move around for errands and go for groceries!!! GOD BLESS YOU MAKI!
Perfect! All my problems done for $60 and some time!
Used this vid for my evo 8 MR. Thanks dog you're a life saver!
Thanks helped me alot your old one helped me too these gears are such pos only lancer owners would know what pos the heater/ac controls are. JDM heater/ac controls are so much better
I love your videos man! Amazing work!!!!
nice job on the video. thanks for including part numbers
My wife's Heater Fan control knob shaft broke. Thanks for the video!
this was the best walkthrough/ help on this.
thank you ! I'm a lancer fan and this channel is great!
Thank you for making this! You saved me some cash!
awesome video and good work. Gonna do it this weekend.
Amazing video and I'm officially a new subscriber
Hola maiki desde Panamá
Excelente tus vídeos tengo un lancer 2003 y gracias a tus video tengo mi carro bien nitido
Thank you thank you!!! Biggest help of any video!
love the channel keep the fixes going👍
+cody brennan Cheers
Thank u so much ! I just diy now and its 10pm here inphilippines, tnxsomuch
Awesome vid! Keep up the great work!!!
Good job, I see each of your videos! 👍
awesome video mackey and kip up the good work bro
+Papp Tomthai Thanks!!
Can I add you to friends on Facebook? ?
Papp Tomthai
yes facebook.com/DarkDragonWing
Exactly what i needed to fix my a/c. Thank you!!
Great video!
Great video! 👍 I have to replace a broken cable on mine. This is a big help.
+Rik Steele Cheers!
Nice job!
you're awesome man, thank you tons for sharing; you're a big help!
Awesome fix. Keep going.
very good video. Our fan control switch just went (burning plastic smell) Used your video to figure out we only need that part to fix it.
Great fix! More Lancer fix please! Lol 😆😆
+Lavelle Boyd Thanks! More for sure, cheers
good video bro keep making more videos
control cables being like bicycle brake cables using teflon lubricant from bike shops on the steel wire might help reduce the friction.
this and PTFE grease like ultimox 226
great video brotha!
Thanks for sharing your experience with us.. the video is very helpful.. now you have a new follower..
Your video was awesome! Thank you!
+hardcoreracing Cheers!
You are very helpful. I have a 2003 all the same problems.
Holy shit, this was awesome. I really like your vids. You are very talented.
+BBB Thanks!!!
This is awesome thank you so much.
hi, mackey. i want to watch you doing rear drum brake pads, all kinds of gauges, and engine rebuilding. cheers!
+wut wat For sure, if only if I have lots of money. haha cheers
That was so great, thanks
Me gustan mucho tus videos. Los haces muy entendibles
You are professional 👍
how do you replace the circular gear at 4:04? mine is stuck and very hard to move
Hello friend, You know where I can get the 2002 Lancer ES Manual? Thank You so much for your videos.
+the dark dragonwing once again amazing work keep it up bro👊👏💯
+the darkdragonwing
+captain gaming bacon Thanks a lot, cheers!
+The DarkDragonWing I appreciate your response bro keep it up😋😀😄👊💯
Thank you for this excellent video guide!
Сломался тросик на печку, вылечил так. взял стальную проволку 1,5 мм отмерял по тросу, выгнул кольца промазал посадочные штыри и поставил в место троса сейчас все замечательно переключает
A1 machanic ...nice vid
Keep it up man! I like all the things you do to your cars, Minnesota is not a good state to have tuned cars, I know how you feel lol.
+Mr. Prom haha Oh man I love people who can relate and feel the pain! Thanks, cheers!
Cheers! lol What part do you live in? Bloomington?
Mr. Prom
I live in Columbia Heights
whoa! Move down a lit bit! lol, I live in Burnsville. Its a 40 min drive lol And have you been to the car shows recently?
Mr. Prom
I think so, the Mitsu cook out think. I don't go to car shows much, I don't have a completed car to show off. haha
Great video, good job.
Bro thanks you solve my problem nice video
Very helpful thanx
Mackie on TOP GEAR? (think about it BBC)
Maybe... no jk
nice job. cool vid.
Very good
Hi Mackie,
Looks like you have an AC/ heater blend door issue (TSB-055-003). It is really tedious to replace it. I would love to see your video on it. Thanks
+Amir Afzal Thanks! Yes, that looks like a lot of work.
อยากเห็น การติดตั้ง ระบบแอร์ ออโต้เต็มระบบจังครับ I see the installation of air conditioning Full system + navi
Great help for a Outlander '03. ขอบคุณครับ
Bro u showed everything except removing cable,anyway thank u very much
شكرا لك استفدنا كثيرا منك
Thank you very much
you are the best....
Awesome Dude thanks!
I'd like you to make an episode about changing AC air filter, please :)
+true call My Lancer doesn't have AC air filter, but I think I can put one in there, it's possible I think. cheers
wonder work. i have the same problem, i will try to fix it accordingly.
Hey what's with the hole you super glued shut? Is that to lube the blend door?
Nope, someone poked a hole through it by accident.
Amazing! Thanks!
muito bom parabéns pelos seus vídeos.
Were can i get that gear that goes on the middle of the two new gears you put and greased? Its the one that opens the compartment to either send heat or cold
The gear that goes on the middle of the A/c Control gears
Thanks man.
Just found this good vdo. My lancer cannot turn on ac blower on speed 1-3, but just only 4 can operate. I found the root cause should be blower resister, but I don't know where is it? Could you please help, or any recommend?
Suggestions on what could be the case of a 2006 mitsubishi ralliart hesitating when driving
Bad O2 sensors.
Could you please advise, where did you buy this guide pin, which you have replaced at 2:20?
+Anton Prigarin Right here www.ebay.com/itm/331305021707
+The DarkDragonWing Thank you!
nice video bro but what is the hole for in Evaporator core
Thanks! I'm not sure neither.
thank you for answer
i need way to clean Evaporator without removing the dashboard of the car may be you can help me
Hmm, I have never removed it so I don't know.
THANKX
thanks for you help, make more videos
+produccioneshc1 Cheers
I need to do this. My a/c knob always gets stuck.
Thank you
yea i actually broke it off turning it, so i need to replace the whole unit.
+Jayson Laird lel good luck.
thanks so so and
so match
Your videos are very helpful. Thanks alot. I'm the proud owner of a cs3 2004 lancer. Are those bulbs t5? The one on the lower right side in mine is blown. I would like to know which led bulbs to order. Thanks alot.
Watch this video right here, the bulbs sizes are in the description. ruclips.net/video/Jn0V0V2aUdw/видео.html
hey i just was doing my now..helped alot!! on last problem is that when i hooked up the black cable back to the link arm,once i switch my knob to cold or hot the cable in the bottom wont push the pulley (link arm)up or down..do i need a new link arm? or what would the problem be?
+Marco Roman You have to straighten it up. And or you will have to help it turn like I did in the video. cheers
Hi need some help. That little piece that aligns the shift gears on 4:04. What is it called? Mine isn't shifting properly and isn't loose like yours. Do I need to replace that to? Because my gears aren't shifting properly after replacing the pieces. Thank you.
That is the main cause of all the hard turning. It's a big job to replace it. Here it is: ebay.to/2LjJfhM
Thanks! I don't think I will be able to replace that lmao
What is your current camera? The Quality is awesome!
+Sahan Methmal Camera: Sony FDR-AX100
Thank You :D
Hi how are you... your videos are really good.. i change the gears but the knob is still hard doesnt move. what is really hard is the gear that is in the car already the box that you clean and put glue, you think is any problem inside of it or i just have to buy the wire link... i dont know what to do .
You have to replace this: rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575273973&campid=5338044275&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FGenuine-Mitsubishi-A-C-Heater-Temperature-Blend-Door-Repair-Kit-Lancer-Outlander-%2F201259997216%3Ffits%3DYear%253A2003%257CModel%253ALancer%26hash%3Ditem2edc07d820%3Ag%3Afk8AAOxyTyBSWG6P%26vxp%3Dmtr
Video: ruclips.net/video/GxW_ju-IZcs/видео.html
More video: ruclips.net/video/ZdxH-NiipPY/видео.html
Hola.. disculpa, yo tengo ese mismo auto y el mismo problema: pero esa perilla que cambiaste , el selector de temperatura, es demasiado duro. Solo puedo moverlo desde el engrane. ?que me recomiendas hacer? .. puedes ayudarme ?
I went to the dealer to buy the white shaft to the far left nob. They ordered the center shaft (47.00) that I didn’t need and couldn’t return. They didn’t have a part number for what I needed. You show correct no
Hi love ur vids will u be doing any rc modify
+IIteckers II I will be making RC Modify soon, yes.
I still had too much heater control knob resistance and have to revert to maneuvering the gears by hand. I bolted an 8" long steel bar (3/4" wide by 1/8" thick) to the rearward gear so I can easily reach down while driving to adjust the temperature. Bend the bar towards the tunnel to keep it out of the way of your throttle foot.
You wouldn't still have a picture of that lying around would you?
@@etp_23 Sorry Eric....no picture and I sold the car. But it was fairly easy as I recall to fasten the bar to the gear.
@@Richard-mm5wt where did you find the bar? And how did you mount it?
Thanks a lot; very useful vid,
i want to ask u what's the number of the white Pin (internal) u changed and where i can find it ?
thank u again
Hi. I'm glad to hear! Here it is on eBay: goo.gl/vjmIpM