SIMPLE INSTALL? 6.7 Cummins Mishimoto High Flow Catch Can
HTML-код
- Опубликовано: 17 окт 2024
- Parts discussed or installed:
1. Mishimoto High Flow Baffled Oil Catch Can MMBCC-HF: amzn.to/2Wo8ORY
2. (2) MishiMoto M27X2.0 to 12AN Fitting MMFT-M27-12BK
3. (3) Vibrant 12AN 90 Forged Hose End Fitting 21992: amzn.to/2Wu5WTu
4. (2) Vibrant 12AN Flare X 16AN Straight w/ O-Ring Fitting 16842
5. 10' Vibrant 12AN Nylon Braided Flex Hose 11972
HELP SUPPORT THE CHANNEL (READ BELOW):
Visit my website, allbeastproject... for our official merch, partners, special subscriber discounts & more!
Purchase AMSOIL products from BEAST Synthetics. Visit my AMSOIL Dealer website: beastsynthetics... (My AMSOIL Dealer #5746939)
*SAVE $$$ Become an AMSOIL Preferred Customer: www.amsoil.com...
*MAKE $$$ Become an AMSOIL Dealer: www.amsoil.com...
Need anything on Amazon? Please use my affiliate link: amzn.to/2zt5hcf
Send us stuff (if you like) & we’ll feature it in a future video.
BEAST Projects (Steve or Heddy)
PO Box 41
Wagontown, PA 19376
STAY CONNECTED! Follow us on:
Instagram: / beastprojects
Facebook: / allbeastprojects
Twitter: / beastprojects
THANK YOU FOR YOUR SUPPORT!
My favorite tools, shop accessories & vlogging gear (Affiliate Links):
1. GRYPMAT Flexible Non-Slip Tool Mats: bit.ly/34jQHlm
2. GoPro Hero 8 amzn.to/30EvXVs
3. DJI Mavic Pro Fly More Package amzn.to/2BUSBtt
4. Canon M50 Camera amzn.to/2BZqv4Q
5. Rode VideoMic: amzn.to/2pdBLo8
6. Rode VideoMicro: amzn.to/2M2jB1K
⚠ DISCLAIMER: BEAST Projects tutorial, instruction & how-to videos are intended solely for entertainment and/or informational purposes & for use by persons having appropriate technical skill, at their own discretion. BEAST Projects is not responsible or liable for any loss or damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information in this video. This video description contains affiliate links.
I know this is a old video but I need to get a catch can for my 6.7 my question is did you run the second line to anything or just leave it open?
so, i'm not clear on where your can exhausts to - did you route it back to the turbo or did you just vent to atmo?
can you elaborate on what fitting went where?
the number of fittings you used, just isn't adding up to me.
Atmo
I had the same question so I'm glad to see you answered it. I was also wondering if you gutted the CCV filter or left the filter media in and plan to change it as required? Is the lack of draw from the turbo, since you vent to the atmosphere, an issue w/o gutting the filter?
No matter who builds transmission it will fail fast again, unless you control the heat. Remove your transmission thermostat because it holds transmission fluid at 200 degrees temperature before it circulate fluid through cooler.
It’s coming
Where did you route the out line to?
Watched ur video , can clear see what u put on the frame to hold the catch can
Why mount it so far down and not in the engine bay?
I find with using AMSOIL Signature Series I have to empty the catch can on my 1500 at about 10,000 KMS.
In ATS's defense, they have 6 stages of builds for most transmissions and just a valve body upgrade or stage 2 upgrade isn't really the transmission specs fault!! That comes down to the owner. . .
Im curious what you did with the two lines on the drivers side of the stock valve cover when you installed the billet valve cover?
Capped them if I remember correctly
Hey with the billet cover. What do you do with the Crank case pressure sensor?
Do you have to
Drain the catch can? What happens if it get full? would it go into the turbo, motor?
It would just dump onto the ground, but it’s never full between oil changes. The baffling in the DJ valve cover is awesome!
BEAST Projects cool thanks man
You have me worried to drive my Ram. I am afraid the transmission is going to explode!😂😂😂
🤣
Iv been looking in to getting a catch can for a while now, What’s the difference between the 200$ catch can you just installed and the 30$ ones you can get on amazon?
All comes down to quality & engineering. Mishimoto’s catch cans are specifically engineered for diesel engines.
Thanks Steve!
Anytime, Hugh
An ATS transmission failed?! What a surprise. 🙃
On 35s too? I bet he has stock gears...
I heard more bad experience with ats than good.
Stage 3 ATS 68rfe, stage 2 turbo, everything is going good. Medium off road, heavy hauling. No complaints here
Great video keep it going love your channel
Sweet video and I love your hat and sweet shirt
Thanks Tina!!
@@BEASTProjects your most welcome keep bring the videos
Great video again 😬👍
It’s pretty interesting if they gonna use some revmax parts 💪
You're suppose to be in timeout 🤔
Dixie Mae who are you ??? 😂😂😂🙋🏻♂️
mikestrucks I'm your daddy! 🙈😂😂😂😂
Dixie Mae Hahahaha......😱😱😱😱🙈🙈😅😂👍
Is dirty diesel in PA. And what about that tranny shop. What’s the name of them? I’m here in VA and looking for help on my ‘13 ram 2500. Thanks !
You should do a video on tires towing. Especially in the dually. Just learned a good lesson on my Ram dually beast
What’s that?
Ram BEAST Projects when running duals on the 3500. The tire pressure is paramount. My rear end was shaking like crazy and the dealership replaced 2 outer rears. A few days later I’m still getting a bad shake. I checked the tire pressure of the rear tires and they were over inflated. Once I adjusted the tires the truck runs much better. Although it still shakes some and the passenger seat still shakes. Still a good lesson about running duals.
Good to know
What did you do with you're other 2 crank case vents in the driver side of the stock valve cover?? Thank you
Plugged them
@@BEASTProjects just plug the old lines and tuck them? Or plug where they are going to?
The DJ valve cover comes with caps to plug the lines. You can get a block off plate from KingSpeed to completely remove the lines. I just never got around to doing it, I just capped them.
@@BEASTProjects right on man thank you! Love the truck! I got the same wehrli fab second gen swap powder coated illusion lite blue. Looking forward to more videos
Did you put the flares back on the beast or are you going to leave them off seeing what they did to your paint? Word of advice, stay away from bio diesel in the beast. Had to put some in my Cummins on a trip and you can tell a huge difference in how it runs,and not in a good way.
The flares off for the time being. I got the rear ones repainted. I need to order new hardware from Bushwacker & I’m working a solution to protect the fenders with them on. I just need to find the time to do it. Haha Good to know about the bio diesel. 👍🏻
Have you tried the pedal commander? ( throttle response ) ?
Nah.. I wanted to review the Pulsar
@@BEASTProjects Steve, get the pedal commander..... I got it for my ram 2500 and it was a whole new BEAST!!!! Throttle response is instant. Check out Ryan Mayer's pedal commander video 😃👍
@@BEASTProjects Sorry just finished watching the video, the guy with the mirror question can get them from the website www.infotainment.com comes with the bypass, door modules, new switch and mirrors all included.
Thanks buddy, I let him know.
Great video 😎👌
when CCT gets the final parts list for the 68fre they should call it the Ram Beast upgrade. oh stop drinking monsters, your liver and kidneys will thank you.
Yeah no kidding about the Monsters. I have a friend who used to work for the company who provides the concentrated powder for those and he had to wear a respirator to handle the flavors. I quit drinking them and have a lot less heartburn.
I need to find a replacement... It’s difficult to get Bang, although I love it.
Ram BEAST Projects I take vitamin B and D pills, and switch to one 20 oz coffee a day. I still have the energy, but don't have the twitchy ness anymore.
@@BEASTProjects Reign inferno drinks are the go to for energy and caffeine. They have thermogenic properties and great levels of B vitamins
Pedal comander will give the ram a better throttle response.
Hey Steve can’t find the 27x 12AN adapter
Hi John, it's an Mishmoto part: www.mishimoto.com/m27-20-12an-fitting.html
I wanna see this revmax unboxing
Soon
Put a pedal Commander on the wife's truck, I put one on my Cummins OMG awesome shit..
Was that a mikey g valve cover? I got one from him at motoramma and doesn't have a fitting on the back just an for a hose
I got it from Mike, it’s a D&J valve cover
@@BEASTProjects that's what mine is...
Awesome video thanks
Ok. I have the same D&J valve cover. So this is what I need. Part #'s
You don’t need it if you don’t want to run a catch can
Mines just like yours was. I ordered the catch can. Limiting factor is the 16AN hole on the valve cover. Didn't know where or if I could get one. Even was at D&J trying to address it but it is what it is. 16AN. Lol
Get a -16 o-ring reducer. Vibrant sells them..
Everything is listed in the video description as always 👍🏻
4xMotion is that what you used in your D&J valve cover
Sweet.
Steve, awesome video today and just got my key tag and the multi cam hat in the mail today! Thanks for the super fast shipping!
As for helping the transmission last longer, you may want to check this out from ATS. www.dieselpowerproducts.com/p-19497-ats-3100052392-thermal-bypass-valve-delete-13-18-67l-ram-cummins.aspx. Installed it on my 2018 2500 Hemi and the trans temps have decreased by 50* on average. Heat is the enemy! The video of my install is up on my RUclips page. No where near as good as your videos, but it’s my first, and I’m going to hopefully start making videos soon. Thanks for the great content and awesome merch!
These guys obviously don’t know much.. a G56 is made by Mercedes, and it’s a great transmission that COMES IN MANY MANY MANY DODGES.
A built 48 is better than a built 68 though.
Crazy how the install doesn’t start til 12 minutes in....
Not really.. It’s a weekly vlog.
14:41 queue the Rich Piana music...
Right babe.....
Dude any transmission is only as good as the package that's chosen. Obviously whoever had the purple transmission is abusing the truck !!
As far as your truck if you don't get a transmission that will handle 800 to 1000 horsepower you wasted a lot of money with your transmission.
Just saying.
When I watched your deal with the transmission out of your truck I couldn't believe that you didn't go back with everything billet and as heavy duty as you could have.
Yup, i know.... I know.... I’ll probably refresh it in a year & billet everything.
@@BEASTProjects Love the videos and the Family Brother !!
By the way it's because of you and Greg A. That I want a Damn Ram Beast of my own. Damn Y'all !!! 😂😂😂🤟
Thanks bro!
Not Mercedes Transmission. A stand alone German company that Mercedes happens to use. ZF is much better than any Chrysler trans ever was.