If you read the radio codeplug, the Encryption keys either basic or enhanced encryption are wiped and not stored in the codeplug and are not retrievable same for the RAS key!
Hello good day, i did follow your guide but it seems it won't work. i did from the very start to last but it seems my motorola version 16 CPS won't detect the recovery file. can you assist me with my cause.
Damn Google algorythm, I can read-write to radio no problem but someone changed copeplug master password and they deleted all backups. How do I remove password on the codeplug on the PC?
Hi could you do a video bypass code plug password. Recovering program frequency. on a motorola dp4801e. and a DM4601E. Motorola CPS 2.0 software. What software you would use to hack into the radio. Without wiping any information off the radio.. and bypassing the password. to get access from the radio..?
Yes , I tried that but it ask for the password to continue, unless I am doing it wrong. I tried to also do a charging cradle clone and I got an error message as well. I do not care to know what the frequencies are on the radio with the password protected code plug, I just want to reset it or rewrite the radios.
I was exactly thinking about cradle method... my ideas are running out. Last one would be try to update firmware? I have no idea if it's possible - I have zero experience in US radios - but in general updating firmware should skip checking for password. Try check if there is new firmware for it - on back plate should be factory version and check if You can try download anything newer and load it.
I bought a Motorola XPR 7550 and it has been stunned and I cannot clone it or put another codeplug onto the radio, It only asks me for a password when I try to read it. Any help?
Found this interesting video. So you unlock the radio by saving the Tuning codeplug, performing a CPS recovery and reprograming a sample codeplug. Did I miss a step?
Hey, I believe using Mototrbo Tuner is optional - but I advice to create backup of information that was set up by Motorola at factory - and they are fit for that only radio - doing recovery is not regular programming so if something fail & I brick radio - better to have copy of that because without expensive radio tester You can't re align it - I just play safe - back then it was still expensive radio. Most like only step You need to do is CPS recovery and that will update firmware. If You have friend with same type of radio - just ask them for codeplug and try upload it without doing recovery.
Bom dia amigo. Tenho um DEM300 que está pedindo senha quando tento ler os dados dele, via CPS. Poderia me ajudar com isso? Há algum tutorial que eu possa seguir para tirar isso? Obrigado.
@@ElectronicNoobBlog I have samples that came with CP16. When I try write to my DP4400 gives me error 1638, when I try clone it gives me error 1828. Think my cable is not correct?
@@militaryrig If radio is detected as network card then cable is correct (it's just USB cable) - are You sure that radio is not using some ancient firmware long before CPS16?
@@ElectronicNoobBlog With a bit of messing about I managed to clone two of my dp4400's. I Found a different codeplug, One radio initially did not work, Other did. Once I cloned the one that worked I was able to clone the other with that file. Now onto the dp4400e I have, Luckily I've got another thats not password protected so the same should work! Thanks for your help, Love the videos. I also collect military radio equipment, Mainly radio stuff :)
I'm not familiar with US only radios. Are You sure there is password on code plug? Those are commercial - locked to specific frequency radios - it really don't need to have protected codeplug?
@@gusto11071 Interesting. My first step would be trying clone one radio to another. Have You tried that? Without CPS - just copy one unlocked to another - it most like will skip password question.
@@ElectronicNoobBlog @ElectronicNoobBlog I am trying to program an XPR-4550 Model# AAM27TRH9LA1AN. All my other radios are M27QPHLA1AN So it will not allow me to clone over the existing code plug
hello there Electronic Noob. im your follower and subscriber. can i ask some help to recover my mototrbo P8668i coz they forget the password for 3 years. thank you very much, hope to see my message. God bless and happy new year.
Hey, What is Your actual problem? In general You just write (clone) blank codeplug and radio will be operational again. On this video I had hard time because I did not have this blank codeplug delivered with my CPS and no one was using this radio around me). I don't have any codeplugs for non EMEA radios, P8668i is most like AA version. Ask someone who have same radio to read it, save codeplug and send it to You if it's not included with CPS (there is folder that have some basic codeplugs to start). If You want get access to codeplug content and read RAS-keys -I'm not aware of any method doing it with modern firmware.
Europe, we use PMR for unlicensed business and licensed for more professional use. Radio You got are not allowed here so I never work on them & don't have any access to firmware thru my distributor - so I won't be able to help You.
Hi I am facing this problem on my dp 4600 please help Replacement board detected . Please program Serial Number for replaced board using MOTOTRBO Tuner to continue . Where can I download the program؟ MOTOTRBO Tuner
I never installed MOTOTRBO Tuner alone in recent revisions like 16+ - it was part of CPS. When You install CPS there is question what part to install - one of them is Tuner - just tik [x] and it should appear on desktop.
It worked 100%, Thank You from Central South Africa.
If you read the radio codeplug, the Encryption keys either basic or enhanced encryption are wiped and not stored in the codeplug and are not retrievable same for the RAS key!
Thanks for this video its very helpful!
Glad to hear that!
Now this wipes out all the paid for enhanced options that could have been installed in the radio like blue tooth capacity plus etc..
Hello good day, i did follow your guide but it seems it won't work. i did from the very start to last but it seems my motorola version 16 CPS won't detect the recovery file. can you assist me with my cause.
I can decode a SL 1600 device. Can you help me? The CPS program asks me for a code.
Is it possible to clone a apx2000 with encrypted channels to another blank radio?
Damn Google algorythm, I can read-write to radio no problem but someone changed copeplug master password and they deleted all backups. How do I remove password on the codeplug on the PC?
If I turn it on, his book appears in front of me....the remaining 0 times! ...what do they mean is pd785G
how to unlock Motorola XiR P8668, I need to input a new frequency but sad to say this radio have key. can help this issue Thank you.
Hi could you do a video bypass code plug password. Recovering program frequency. on a motorola dp4801e. and a DM4601E. Motorola CPS 2.0 software. What software you would use to hack into the radio. Without wiping any information off the radio.. and bypassing the password. to get access from the radio..?
ONDE CONSIGO O PACOTE PARA O DEM300????
Yes , I tried that but it ask for the password to continue, unless I am doing it wrong. I tried to also do a charging cradle clone and I got an error message as well. I do not care to know what the frequencies are on the radio with the password protected code plug, I just want to reset it or rewrite the radios.
I was exactly thinking about cradle method... my ideas are running out. Last one would be try to update firmware? I have no idea if it's possible - I have zero experience in US radios - but in general updating firmware should skip checking for password. Try check if there is new firmware for it - on back plate should be factory version and check if You can try download anything newer and load it.
The recovery of the radio equipment depends on it not having a read and write password, if so you will not be able to recover it
I bought a Motorola XPR 7550 and it has been stunned and I cannot clone it or put another codeplug onto the radio, It only asks me for a password when I try to read it. Any help?
Should be the same as the 6550
Anyone know where I can get a blank code plug for a DP4600 mdh56rdh9ja1an UHF?
Date of the cold log for the xpr6350? My CPS does not have the sample code plugs for some reason.
Sorry, I do not have any code-plugs for non EMEA, try here -> radiosoftware.ru/
Found this interesting video. So you unlock the radio by saving the Tuning codeplug, performing a CPS recovery and reprograming a sample codeplug. Did I miss a step?
Hey, I believe using Mototrbo Tuner is optional - but I advice to create backup of information that was set up by Motorola at factory - and they are fit for that only radio - doing recovery is not regular programming so if something fail & I brick radio - better to have copy of that because without expensive radio tester You can't re align it - I just play safe - back then it was still expensive radio. Most like only step You need to do is CPS recovery and that will update firmware. If You have friend with same type of radio - just ask them for codeplug and try upload it without doing recovery.
@@ElectronicNoobBlog I attempted to bypass the CPS password but no luck. I think you need a Depot tool to bypass the CPS Password.
@@michaelreyes8670 The recovery of the radio equipment depends on it not having a read and write password, if so you will not be able to recover it
Have you performed this on an APX8500 that is password protected?
No, sorry I never work on any APX radios.
Bom dia amigo. Tenho um DEM300 que está pedindo senha quando tento ler os dados dele, via CPS. Poderia me ajudar com isso? Há algum tutorial que eu possa seguir para tirar isso? Obrigado.
That can be done long ago with cps recovery
For some reason I dont have those files, anyone know where I can find them online?
Hello:
Do you have programming sottware for a XTS3000?
Thank you
Sorry, I work only with EMEA radios - don't have software for different regions.
Where can I download DEP450 Firmware pack?
I have the same problem on a cp200d, not working.
Hi i have a dp2400e with password but i dont know what file i need to my firm, can you advise me? Firm R02.20.01.0002 codeplug 16.00.08
If I have the right sample at the start, How do I recover with that? When I try open recover it says "no matching packages exist"
If You have blank codeplug just open it and write to radio (without trying to read).
@@ElectronicNoobBlog I have samples that came with CP16. When I try write to my DP4400 gives me error 1638, when I try clone it gives me error 1828. Think my cable is not correct?
@@militaryrig If radio is detected as network card then cable is correct (it's just USB cable) - are You sure that radio is not using some ancient firmware long before CPS16?
@@ElectronicNoobBlog With a bit of messing about I managed to clone two of my dp4400's. I Found a different codeplug, One radio initially did not work, Other did. Once I cloned the one that worked I was able to clone the other with that file. Now onto the dp4400e I have, Luckily I've got another thats not password protected so the same should work! Thanks for your help, Love the videos. I also collect military radio equipment, Mainly radio stuff :)
Explanation of how to decrypt the password for the Motorola DP4800
How to unlock the password of an EM300?
At 4:15 in this video you mention running an update file. Where can we download this 935MB file from ? Can you please post a link?
It can be bought from Motorola (sorry I can't share it since it will put me into troubles) - buy it or search internet...
Did you find it?
@@raakardo No I didn't find it yet.
Whats the name of the program?
Excellent tutorial, thank you!
Glad you enjoyed it!
How much would you charge to recovery a radio with password lock?
Sorry I don't offer any services only share my knowledge. Best bet will be ask some local ham operators.
Would this work on a Motorola RDU4160d ?
I'm not familiar with US only radios. Are You sure there is password on code plug? Those are commercial - locked to specific frequency radios - it really don't need to have protected codeplug?
yes it does have a password, i can not reset it or read it or write to the radio.@@ElectronicNoobBlog
@@gusto11071 Interesting. My first step would be trying clone one radio to another. Have You tried that? Without CPS - just copy one unlocked to another - it most like will skip password question.
explain ?? i did not understand
Can you retrieve a passcode for me?
Where can I get the MOTORBO software you are using?
You need buy it from dealer or steal from internet.
Well, thank you for your help. I just will have to find a tunning software somehow.
Any time!
@@ElectronicNoobBlog @ElectronicNoobBlog I am trying to program an XPR-4550 Model# AAM27TRH9LA1AN. All my other radios are M27QPHLA1AN So it will not allow me to clone over the existing code plug
Any clue where to find mototrbo tuner?
It's on same CD as CPS - so You get them both.
hello there Electronic Noob. im your
follower and subscriber. can i ask some help to recover my mototrbo P8668i coz they forget the password for 3 years. thank you very much, hope to see my message. God bless and happy new year.
Hey, What is Your actual problem? In general You just write (clone) blank codeplug and radio will be operational again. On this video I had hard time because I did not have this blank codeplug delivered with my CPS and no one was using this radio around me). I don't have any codeplugs for non EMEA radios, P8668i is most like AA version. Ask someone who have same radio to read it, save codeplug and send it to You if it's not included with CPS (there is folder that have some basic codeplugs to start). If You want get access to codeplug content and read RAS-keys -I'm not aware of any method doing it with modern firmware.
Where are you located ?
Europe, we use PMR for unlicensed business and licensed for more professional use. Radio You got are not allowed here so I never work on them & don't have any access to firmware thru my distributor - so I won't be able to help You.
Hi. Do you have a codeplug for the dp4601e. I've looked in the CPS and don't have a sample copy of it. Thank you
I checked - have only for DP4601 (without E) i'm not sure if CPS will allow to load it.
@@ElectronicNoobBlog I'd it okay if you sent me a copy. My CPS don't have this it's only a few but nothing close to it.
@@sr-xv7eu Here You go -> electronicnoobblog.com/motorola-mototrbo-dp4601-sample-codeplug/
@@ElectronicNoobBlog gave it a try. Didn't work. I tried recover but said no matching packages
@@ElectronicNoobBlog i have a dp4400e and i cant find a sample file for it do you have one that i could use please
can u send me firmware update package
It can be bought from Motorola (sorry I can't share it since it will put me into troubles) - buy it or search internet...
@@ElectronicNoobBlog you can help me .? I have code problem with my DP4800e
@@MegaDonstefan same here with the dp4800 .. did you find a solution ?
@@raduardeleanu4800 no sorry
amazing! work for me with DP4401!
Great!
@@ElectronicNoobBlog i form Malaysia, can please give me software tunner CPS 😉??
hi , i have dp4401 too , do you have file or link for unlock mine?
i did all the steps, but when i try to go back to recover it cannot find the package that I save. why is that?
where the hell do i get this software?
I am having the same problem it tells me no matching package exists
Sample DP 3601 only Vhf no Uhf
I need this software my friend
No matching package(s) exist.16:35
492
MOTORBO
Tuner
Hi I am facing this problem on my dp 4600 please help Replacement board detected . Please program Serial Number for replaced board using MOTOTRBO Tuner to continue .
Where can I download the program؟ MOTOTRBO Tuner
I never installed MOTOTRBO Tuner alone in recent revisions like 16+ - it was part of CPS. When You install CPS there is question what part to install - one of them is Tuner - just tik [x] and it should appear on desktop.
@@ElectronicNoobBlog
Sorry but I can't find it can you help me please
@@ElectronicNoobBlog Followed everything in video but when I go to recovery it still pops up no matching packages... Is I'm missing something?
Thanks🤝
Welcome 👍
Thanks
Welcome
Error #1057