I just purchased Dolby Atmos for my Turtle Beach 600 Gen 2 headset, and it's worth every penny! It added so much bass, loudness and clarity that I literally felt like I was in the game!
@@gobishy8011 i just went to custom, and turned every level up! Just enable everything and apply. Your headset will remember your settings everytime you use them, so you won't have to do it over again.
For those that are encountering problems with xbox one and the access app looping back and forth, I found that uninstalling and re installing along with rebooting xbox seemed to work for my problem
This app is great but there isn’t enough videos for the best setting like I want to hear footsteps loudly in warzone with the bass lowered so things like helicopters aren’t as loud I can’t figure it out on my own and I’ve only seen 3 videos on the best settings for it but they all make helicopters and dialogue louder
I cant even get that. I'm stuck in a loop where dolby tells me I need to have setting set to dolby on my xbox, xbox tells me I need to have dolby installed
I unplugged my mic and quit out of dolby, and went back to settings and tried to change it to the dobly headset settings once I replaced my mic in. It stayed this time and I opened the dobly app and it said rady to use under products and settings were unlocked.
Uninstall the app, reinstall the app. Do not open the app once you reinstall it. Unplug every audio source from your xbox “including HDMI” and then unplug the power cable for 30+ seconds. Plug it all back in and restart the xbox. Dont turn anything else on except the xbox/controller, go to your audio settings and try to select Dolby Atmos (if you cant then plug in your headset/mixamp) then try selecting it again. If you selected Dolby Atmos and it actually stays on that setting then proceed to the Dolby Atmos app, from here it just tells you to follow basic steps and provides specific audio options for your headset. This “should” work, if not then keep rebooting the xbox and try starting things up in a different load order, you will only have to do this once until Dolby Atmos actually works. Good luck
Picked up a wired headset for late night movie watching (Xbox One X is our multimedia device) and though I rarely purchase apps I sprang for this one and it made a serious difference. Thanks for the walkthrough, it filled in the parts I wasn't sure about!
(Repost) Uninstall the app, reinstall the app. Do not open the app once you reinstall it. Unplug every audio source from your xbox “including HDMI” and then unplug the power cable for 30+ seconds. Plug it all back in and restart the xbox. Dont turn anything else on except the xbox/controller, go to your audio settings and try to select Dolby Atmos (if you cant then plug in your headset/mixamp) then try selecting it again. If you selected Dolby Atmos and it actually stays on that setting then proceed to the Dolby Atmos app, from here it just tells you to follow basic steps and provides specific audio options for your headset. This “should” work, if not then keep rebooting the xbox and try starting things up in a different load order, you will only have to do this once until Dolby Atmos actually works. Good luck
I found this in a forum In-game audio issues when using Dolby Atmos: If you experience audio problems when you’re using Dolby Atmos, try turning it off: Press the Xbox button to open the guide and select System >Settings. Select Display & sound, then from the headset audio options, select Stereo Uncompressed. Frozen speaker settings after you disconnect a Windows Sonic or Dolby Atmos headset: In most cases, disconnecting or turning off a headset/device configured for spatial audio (Windows Sonic or Dolby Atmos) will return the speakers to their previous audio settings. However, certain hardware-such as wireless headsets using an intelligent transceiver plugged into USB-might still show the headset is connected even after it’s disconnected or turned off. Unplug the headset or the headset component attached to the Xbox. This should immediately return the speakers to their previous configuration without changing the headset or speaker audio settings. Plugging the headset or the headset component back in should restore the headset format you’ve chosen. If you’re still having problems getting Dolby Atmos to work on Xbox One, check the headset/speakers manufacturer’s website for more info.
I just paid for Dolby Atmos last week and now when I go into the Xbox settings to change the audio to Dolby, it says “Dolby Atmos For Headphones requires a license” can someone please help?
Doesn't work. If i plugin the headphones it still says "enable Dolby Atmos" When i press on "setup", it sends me to the settings, then i press "Dolby Atmos for Headphones. But i get again a message that i need to download the Dolby app where i just came fron.
I found this in a forum In-game audio issues when using Dolby Atmos: If you experience audio problems when you’re using Dolby Atmos, try turning it off: Press the Xbox button to open the guide and select System >Settings. Select Display & sound, then from the headset audio options, select Stereo Uncompressed. Frozen speaker settings after you disconnect a Windows Sonic or Dolby Atmos headset: In most cases, disconnecting or turning off a headset/device configured for spatial audio (Windows Sonic or Dolby Atmos) will return the speakers to their previous audio settings. However, certain hardware-such as wireless headsets using an intelligent transceiver plugged into USB-might still show the headset is connected even after it’s disconnected or turned off. Unplug the headset or the headset component attached to the Xbox. This should immediately return the speakers to their previous configuration without changing the headset or speaker audio settings. Plugging the headset or the headset component back in should restore the headset format you’ve chosen. If you’re still having problems getting Dolby Atmos to work on Xbox One, check the headset/speakers manufacturer’s website for more info. Let us know with a reply how it goes!
@@aziza7660 yeah. And also turn on the virtualize too. Its loud af after you update the settings. Just be sure to make your audio on your dashboard max volume too.
I found this in a forum In-game audio issues when using Dolby Atmos: If you experience audio problems when you’re using Dolby Atmos, try turning it off: Press the Xbox button to open the guide and select System >Settings. Select Display & sound, then from the headset audio options, select Stereo Uncompressed. Frozen speaker settings after you disconnect a Windows Sonic or Dolby Atmos headset: In most cases, disconnecting or turning off a headset/device configured for spatial audio (Windows Sonic or Dolby Atmos) will return the speakers to their previous audio settings. However, certain hardware-such as wireless headsets using an intelligent transceiver plugged into USB-might still show the headset is connected even after it’s disconnected or turned off. Unplug the headset or the headset component attached to the Xbox. This should immediately return the speakers to their previous configuration without changing the headset or speaker audio settings. Plugging the headset or the headset component back in should restore the headset format you’ve chosen. If you’re still having problems getting Dolby Atmos to work on Xbox One, check the headset/speakers manufacturer’s website for more info.
Do i need to run the dolby access app running in background? Even if headset format already says Dolby Atmos for headphones. Or am I good I don’t have to open the app every time I play
I plugged headphones in to Xbox controller. I've been back and forth with setting in xbox and Dolby app. It will not work as intended. It's saying I have to change I'm xbox setting so when I select Dolby in xbox settings, it will not pick up headphones and just guides me to Dolby app and the app just points me to xbox settings. It is just not working for me. I have hyper x cloud 2 and I tried my Sony m3 headphones and no matter what. Nothing is working on xbox sound settings or Dolby atmos app. Help please 🥴
What is the best sound setting forWitcher 3 on Xbox? The sound from the horse footsteps are much quieter than on the PC version. Also the hit sound when fighting with the sword. No matter which sound option I choose: Windows Sonic, Dolby Atmos or DTS: X. I use a Steelseries 9X Headset. Sound is up to 100% and chatmix is full on game.
I can get Dolby atmos for headphones just fine. But when I play online with friends in party chat they say they hear a lot of static through my mic with my wired headphones. Is there a setting to fix this issue?
Can you get the free subscription card if you buy the Astro TR headset by itself without the mixamp? Or can you get the free subscription card if you just buy the mixamp by itself and not the headset?
thanks for the video! I'm new to Atmos and not really familiar with the Intelligent Equalizer in Game Mode. Do you recommend warm, detailed, or balanced for single player games?
I just bought Rigs 800 pro max whatever it called I tried to charge it at night as soon as I go to bed it literally stops charging how can I solve that problem and another thing how can I activate the headset to the Dolby
I cant hire the audio on audio and music tab! Got my headset a couple days ago! All it says is “use your headset or other device to change the volume. Ive done everything else downloaded the app , changed everything the way its suppose too! And still cant hire the headset volume!
Works well... But for warzone.. Ive no idea what eq to use... Generally keep it on gaming. But as there's no sound on the eq ive no clue what to set what's what
So I have Astro headset have Dolby access and have code. Go to settings to enable. It sends me to app. Try to enable on app. Sends me to settings. Back and forth. Headset is connected
Hi folks, I recently have been experimenting with my Nova’s and have also downloaded the Dolby Atmos app on Xbox, however I created a custom equaliser profile on the DAC and have since downloaded Atmos, what I am now wondering is if the equaliser settings on the DAC are going to conflict with the Atmos app settings? No one seems to have ever asked the question when I search online?
Thanks for the video! Now I'm debating on just getting Dolby atmos instead of getting a whole new headset for it. Or will it not work with an old pair of headphones?
I've been using the Dolby app for my headphones bc it came with a code, and recently the Dolby app stopped working with my headphones, the "Enable Dolby Atmos" thing still shows even after I plug in my headphones, idk what's wrong
Yeah, this is the rub -- different sound drivers (amplifiers, televisions) process sound differently. So to universally say "this is better than that" isn't true -- and the are definite advantages/disadvantages of various solutions. In general, wired signals are more powerful than wireless (so Xbox Controller is less powerful than TV) but is TV better than Xbox? It depends on your audio latency and how powerful the signal is, so your mileage will vary. And most important, you have the "golden ear" so you have to use what sounds best to you. :) Good luck!
I have a pair of TR a40s and the box they came in said that they have Atmos built in but the app keeps asking me to buy a sub to dolby Atmos. What do I do?
Ps5 have dolby atmos available for audio output. But i cant download the dolby access app on my console ? I want to be able to customize my own EQ . This sucks man. I dont have $250 to spend on sony playstation headset
I cannot hear Any three dimensional audio on my headphones and I cannot place the direction of where sound is coming from. Any fix for this. Playing on Xbox series X with Astro a 50s
Someone please help me!! I have just purchased some A40’s. I have installed and entered the Dolby Atmos code and I also have the Astro command centre. If I edit my EQ settings in the Astro command centre is that all I need to do? Or do I need to change the settings in the Dolby app? I’m trying to get my get the perfect settings for footsteps but can’t seem to get it right. Thanks in advance!!!
I have the astros a40tr the white mixamp, I can’t use my optical cable with my series x, I was looking at buying the Dolby app but is there a way to get the tournament EQ the astros have through this app or similar
With my headphones connected when I press the info button on my TV it shows stereo selected and not Dolby sound. Now when I remove the 🎧 it will show Dolby sound selected. Is that normal?
I have bought the Gear up rig 400pro and my microphone doesn't seem to work however the speakers are 100% fine aside from not allowing me to talk with friends
Can anyone tell me why my Mic isn't working? This is a birthday gift from my brother and I'm trying to set this up. The sound and everything works but I can't figure out why I can't talk through the Mic..... Please help
Please help - randomly dolby vision is no longer an option in the dolby app under products. I've paid for it, it was working fine yesterday, but now does not show dolby vision. I only see dolby atmos for headphones and for home theater.
@@vypermajik randomly yesterday when I got on my Xbox it says dolby vision again under the products section. I didn't do anything different or change anything, not sure what happened but I guess I'll take out. Assuming an app glitch of some sorts.
vypermajik I have the same headphones and installed it and everything but one day it disconnected and now it won’t work..I tried a lot of things and get get it back on
vypermajik I have the same headphones and installed it and everything but one day it disconnected and now it won’t work..I tried a lot of things and get get it back on
Sorry De'Angelo. It's a lot of information to explain without losing interest. According to RUclips metrics, rarely do people make it to the end. Am I THAT boring? ;)
Thank u for it but how do I use a promo code bc I recently bought a headset and it gave me a promo code i can use which will let me use the dolby access for 2 years but idk where it is
unknown 2593 If you’re taking about the code to redeem, its via the Xbox Store Page and then Redeem Code. You can also sign into your Xbox account and go to Xbox.com/redeem.
Thank you so much that actually helped my apologize I just joined the xbox live community 3 months ago and I bought a headset since I play R6 competitavly and I thought headset will help instead of just the TV I really appreciate and keep up the amazing videod
I redeemed the code 2 years ago and it recently ended, I just bought another headset (rig) with a sealed code but it says "you already own this" why can't I redeem the code or renew the code?
Bruhhh thx u so much, I bought a pair of rig 800 cans and they come with code but I didn't kno there was extra steps lol for a bout a month I haven't been getting the best value out of these now I am. Thxs again for making this video
It should run okay through optical but on my opinion always remove excessive connections as necessary. So if it’s possible to go straight from console then do that.
Once you buy the license do you have to keep paying on it? And does it work for multiple headsets? And do you have to buy it again for like a TV Dolby access app?
It’s account bound. So one buy, per account. So carries from console to console, headset to headset - as long as your account is signed in, you can use it. And it’s a one time fee. Hope this clarifies. 😎
I like using Atmos. However using my Gen 4 Astro A40 TR’s w/ mixamp pro TR, playing COD Warzone, my team can’t hear me. I have to switch it back to stereo uncompressed for headset format, stereo uncompressed for HDMI audio, bitstream out for optical and Dolby digital for bitstream format. But whenever I have the Dolby Atmos app active my team can’t hear me no matter what
Anthony Rimmele Wow, I haven’t heard that one before (no pun intended!). I use a similar setup except on PS4 and I have been fortunate. I have struggled with Xbox settings before but usually it’s in what I hear vs what I transmit. Are you able to replicate the problem on PC? Wondering if your mike is faulty?
vypermajik I just game online via Xbox one. My mic isn’t faulty because whenever I switch headset format back to stereo uncompressed I’m able to communicate with my team. I’ve been extremely fortunate to have no bugs within my Astros since I purchased them... as soon as I posted this comment I realized that I was checking the box underneath headset format for optical or HDMI. I still haven’t played with a team but I’m hoping that I don’t have to retract my question due to negligence on my part lol I was just following the instruction set up from Astro. I guess I’ll let you know but I definitely appreciate your speedy response
the audio works for me fine. it’s just the mic. the mic doesn’t work and idk why. and i play rainbow 6 competitive and using the xbox app isn’t always fun for a mic. so is it a setting too or?
I just purchased Dolby Atmos for my Turtle Beach 600 Gen 2 headset, and it's worth every penny! It added so much bass, loudness and clarity that I literally felt like I was in the game!
what’s your settings for bass?
@@gobishy8011 i just went to custom, and turned every level up! Just enable everything and apply. Your headset will remember your settings everytime you use them, so you won't have to do it over again.
I'm glad you liked the application. I think it's a must-have.
Is it a one time purchase or a subscription?
@@SavageSKUM I got rig headphones and got 2 years free
For those that are encountering problems with xbox one and the access app looping back and forth, I found that uninstalling and re installing along with rebooting xbox seemed to work for my problem
Thank you bro, hopefully it works for me
This app is great but there isn’t enough videos for the best setting like I want to hear footsteps loudly in warzone with the bass lowered so things like helicopters aren’t as loud I can’t figure it out on my own and I’ve only seen 3 videos on the best settings for it but they all make helicopters and dialogue louder
I cant even get that. I'm stuck in a loop where dolby tells me I need to have setting set to dolby on my xbox, xbox tells me I need to have dolby installed
I unplugged my mic and quit out of dolby, and went back to settings and tried to change it to the dobly headset settings once I replaced my mic in. It stayed this time and I opened the dobly app and it said rady to use under products and settings were unlocked.
Same idk what to do
Fucking same. God damnit I hate Xbox
Uninstall the app, reinstall the app. Do not open the app once you reinstall it. Unplug every audio source from your xbox “including HDMI” and then unplug the power cable for 30+ seconds. Plug it all back in and restart the xbox. Dont turn anything else on except the xbox/controller, go to your audio settings and try to select Dolby Atmos (if you cant then plug in your headset/mixamp) then try selecting it again. If you selected Dolby Atmos and it actually stays on that setting then proceed to the Dolby Atmos app, from here it just tells you to follow basic steps and provides specific audio options for your headset. This “should” work, if not then keep rebooting the xbox and try starting things up in a different load order, you will only have to do this once until Dolby Atmos actually works. Good luck
@@lyecon2771 ya I did that now it Works thanks
Picked up a wired headset for late night movie watching (Xbox One X is our multimedia device) and though I rarely purchase apps I sprang for this one and it made a serious difference. Thanks for the walkthrough, it filled in the parts I wasn't sure about!
So glad it helped and that you enjoy!
(Repost) Uninstall the app, reinstall the app. Do not open the app once you reinstall it. Unplug every audio source from your xbox “including HDMI” and then unplug the power cable for 30+ seconds. Plug it all back in and restart the xbox. Dont turn anything else on except the xbox/controller, go to your audio settings and try to select Dolby Atmos (if you cant then plug in your headset/mixamp) then try selecting it again. If you selected Dolby Atmos and it actually stays on that setting then proceed to the Dolby Atmos app, from here it just tells you to follow basic steps and provides specific audio options for your headset. This “should” work, if not then keep rebooting the xbox and try starting things up in a different load order, you will only have to do this once until Dolby Atmos actually works. Good luck
It really worked. Thank you so much
Does this really enable Dolby's sound or just display its title in the settings?
Does it work for DTS X ??
Reinstalling for the 5th time
I prefer the movie equalizer and set it to detailed even for games. It makes the sound much louder and deeper than Game mode.
If you are stuck in a loop uninstall then reinstall the restart console then go to settings audio then turn dolby on then boot up dolby app
I found this in a forum
In-game audio issues when using Dolby Atmos:
If you experience audio problems when you’re using Dolby Atmos, try turning it off:
Press the Xbox button to open the guide and select System >Settings.
Select Display & sound, then from the headset audio options, select Stereo Uncompressed.
Frozen speaker settings after you disconnect a Windows Sonic or Dolby Atmos headset:
In most cases, disconnecting or turning off a headset/device configured for spatial audio (Windows Sonic or Dolby Atmos) will return the speakers to their previous audio settings. However, certain hardware-such as wireless headsets using an intelligent transceiver plugged into USB-might still show the headset is connected even after it’s disconnected or turned off.
Unplug the headset or the headset component attached to the Xbox. This should immediately return the speakers to their previous configuration without changing the headset or speaker audio settings. Plugging the headset or the headset component back in should restore the headset format you’ve chosen.
If you’re still having problems getting Dolby Atmos to work on Xbox One, check the headset/speakers manufacturer’s website for more info.
I want to know what is really good for R6 custom settings I don’t know what’s for what on the tabs.
Same
Same 😂
Same
Same.
Lsame
I just paid for Dolby Atmos last week and now when I go into the Xbox settings to change the audio to Dolby, it says “Dolby Atmos For Headphones requires a license” can someone please help?
Doesn't work.
If i plugin the headphones it still says "enable Dolby Atmos"
When i press on "setup", it sends me to the settings, then i press "Dolby Atmos for Headphones.
But i get again a message that i need to download the Dolby app where i just came fron.
Same can someone hel
Help
I got it to work by uninstalling and reinstalling it a fiew
I found this in a forum
In-game audio issues when using Dolby Atmos:
If you experience audio problems when you’re using Dolby Atmos, try turning it off:
Press the Xbox button to open the guide and select System >Settings.
Select Display & sound, then from the headset audio options, select Stereo Uncompressed.
Frozen speaker settings after you disconnect a Windows Sonic or Dolby Atmos headset:
In most cases, disconnecting or turning off a headset/device configured for spatial audio (Windows Sonic or Dolby Atmos) will return the speakers to their previous audio settings. However, certain hardware-such as wireless headsets using an intelligent transceiver plugged into USB-might still show the headset is connected even after it’s disconnected or turned off.
Unplug the headset or the headset component attached to the Xbox. This should immediately return the speakers to their previous configuration without changing the headset or speaker audio settings. Plugging the headset or the headset component back in should restore the headset format you’ve chosen.
If you’re still having problems getting Dolby Atmos to work on Xbox One, check the headset/speakers manufacturer’s website for more info.
Let us know with a reply how it goes!
Joshel PG hey bro i need help i could hear but not talk what do i do ?
Go to custom settings if you want loud sound. And crank all the bars all the way up. You wont need an amp.
I'm a Xbox noob currently. How exact would I customize the volume settings? Turn them ALL the way up? No fine-tuning variation at all?
@@aziza7660 yeah. And also turn on the virtualize too. Its loud af after you update the settings. Just be sure to make your audio on your dashboard max volume too.
AzizA any help to hear where my footsteps are coming from?
When I change the headset format to Dolby it says that I need to download Dolby atmos for headphones but it is already downloaded
I’m also having this problem. It’s an endless loop because it doesn’t register that I have the app downloaded and enabled
Same issue.
I found this in a forum
In-game audio issues when using Dolby Atmos:
If you experience audio problems when you’re using Dolby Atmos, try turning it off:
Press the Xbox button to open the guide and select System >Settings.
Select Display & sound, then from the headset audio options, select Stereo Uncompressed.
Frozen speaker settings after you disconnect a Windows Sonic or Dolby Atmos headset:
In most cases, disconnecting or turning off a headset/device configured for spatial audio (Windows Sonic or Dolby Atmos) will return the speakers to their previous audio settings. However, certain hardware-such as wireless headsets using an intelligent transceiver plugged into USB-might still show the headset is connected even after it’s disconnected or turned off.
Unplug the headset or the headset component attached to the Xbox. This should immediately return the speakers to their previous configuration without changing the headset or speaker audio settings. Plugging the headset or the headset component back in should restore the headset format you’ve chosen.
If you’re still having problems getting Dolby Atmos to work on Xbox One, check the headset/speakers manufacturer’s website for more info.
Same
It would be handy that when tweeking with the settings that u have sound or music so u hear what u are doing
Agree!
Great point! You just gave me an idea, maybe I can adjust and hear what I’m adjusting while the Spotify app is playing. About to try that now.
Do i need to run the dolby access app running in background? Even if headset format already says Dolby Atmos for headphones. Or am I good I don’t have to open the app every time I play
Hello: once you've set it up once, you're good to go. You can always check, but you shouldn't have to open it before launching a game.
@@vypermajik Gotcha thank you!
Oweee dAddy💯
If anyone gets this app for siege please try the music setting with detailed! Honestly it’s the best setting
It feels way more surround! Definitely makes the difference
Fr?
Just the comment I was looking for my g hopefully it works
Is Dolby Atmos better than DTS:X when playing Warzone?
Atmos is better
Very good explanation!
I plugged headphones in to Xbox controller. I've been back and forth with setting in xbox and Dolby app. It will not work as intended. It's saying I have to change I'm xbox setting so when I select Dolby in xbox settings, it will not pick up headphones and just guides me to Dolby app and the app just points me to xbox settings. It is just not working for me. I have hyper x cloud 2 and I tried my Sony m3 headphones and no matter what. Nothing is working on xbox sound settings or Dolby atmos app. Help please 🥴
Hmm. I've had that issue once before, but a hard reset fixed it. As in, turned the console completely off, unplugged it, then started all over.
@@vypermajik yeah shortly after I reset it for the second time and it finally worked. 👍
But my question is how to put a code for the Dolby atmos for a free trial
Exactly! Where do I put in the code??
Go to the Microsoft store on Xbox and put the code in
Where do I find the code for my a50s
great video bro! waiting on my series s and headset to get delivered, can't wait :)
It won’t let me change hdmi audio in speaker audio?
What is the best sound setting forWitcher 3 on Xbox? The sound from the horse footsteps are much quieter than on the PC version. Also the hit sound when fighting with the sword. No matter which sound option I choose: Windows Sonic, Dolby Atmos or DTS: X. I use a Steelseries 9X Headset. Sound is up to 100% and chatmix is full on game.
Works fine on my steelseries arctis 9x
I just got a pair of 7x. What Dolby settings do you use? A lot of ppl said putting it on custom and keeping the preset flat is the best.
@@majk4636 ya I can’t figure out a good setting with my 7x.
So mine doesn’t have a enable button? Confused atm
I can get Dolby atmos for headphones just fine. But when I play online with friends in party chat they say they hear a lot of static through my mic with my wired headphones. Is there a setting to fix this issue?
Tbh I’d just recommend finding a wireless headset if that’s in your budget.
Wireless is the best way!
Do you have a settings in this software for call of duty ? I’ve get gunsounds loud and clear but can’t get footsteps
Great guide and very detailed, cheers mate 👍
Thanks brother. It actually worked for RIG 500 PRO
So glad it helped you!! 👊
Can you go through step where you got the green check enabled on the bottom left on settibgs
Can you get the free subscription card if you buy the Astro TR headset by itself without the mixamp? Or can you get the free subscription card if you just buy the mixamp by itself and not the headset?
Is dolby access a one-time purchase?
Yes
thanks for the video! I'm new to Atmos and not really familiar with the Intelligent Equalizer in Game Mode. Do you recommend warm, detailed, or balanced for single player games?
Detailed, all the way.
I just bought Rigs 800 pro max whatever it called I tried to charge it at night as soon as I go to bed it literally stops charging how can I solve that problem and another thing how can I activate the headset to the Dolby
I cant hire the audio on audio and music tab! Got my headset a couple days ago! All it says is “use your headset or other device to change the volume. Ive done everything else downloaded the app , changed everything the way its suppose too! And still cant hire the headset volume!
Works well... But for warzone.. Ive no idea what eq to use... Generally keep it on gaming. But as there's no sound on the eq ive no clue what to set what's what
So I have Astro headset have Dolby access and have code. Go to settings to enable. It sends me to app. Try to enable on app. Sends me to settings. Back and forth. Headset is connected
My Xbox got a free trail for this should I get it 🤔
Do I also put the hdmi option below Dolby atmos for headphones or I don’t need to?
Unless your headphones are connected with an HDMI cord then nah
The mix isn’t picking up how do I fix that?
Hi folks,
I recently have been experimenting with my Nova’s and have also downloaded the Dolby Atmos app on Xbox, however I created a custom equaliser profile on the DAC and have since downloaded Atmos, what I am now wondering is if the equaliser settings on the DAC are going to conflict with the Atmos app settings? No one seems to have ever asked the question when I search online?
Please replay
I have a Logitech g933 and i use on xbox one its supposed to have dolby atmos license but i cant activate dolby atmos for some reason
My dolby access do not have the apply or enable buttons and I have bought the app. Why don't I have it??
Thanks for the video! Now I'm debating on just getting Dolby atmos instead of getting a whole new headset for it. Or will it not work with an old pair of headphones?
I tried changing headset format to dolby and it says I need a licence even though I already bought dolby
Will Dolby run automatically when I time on my headset and my game. Or will I have to run application first every time?
Just set it once and your good forever
I've been using the Dolby app for my headphones bc it came with a code, and recently the Dolby app stopped working with my headphones, the "Enable Dolby Atmos" thing still shows even after I plug in my headphones, idk what's wrong
What headphones u have
Do you think it's correct to use dolby atmos for headphones on my TV speakers? It sounds much louder and powerful than the home theater version atmos
Yeah, this is the rub -- different sound drivers (amplifiers, televisions) process sound differently. So to universally say "this is better than that" isn't true -- and the are definite advantages/disadvantages of various solutions. In general, wired signals are more powerful than wireless (so Xbox Controller is less powerful than TV) but is TV better than Xbox? It depends on your audio latency and how powerful the signal is, so your mileage will vary. And most important, you have the "golden ear" so you have to use what sounds best to you. :) Good luck!
@@vypermajik thanks so much , dolby atmos for headphones sound so much better
I have a pair of TR a40s and the box they came in said that they have Atmos built in but the app keeps asking me to buy a sub to dolby Atmos. What do I do?
Ps5 have dolby atmos available for audio output. But i cant download the dolby access app on my console ? I want to be able to customize my own EQ . This sucks man. I dont have $250 to spend on sony playstation headset
Do yu need a head set or can i use my tv speakers
I cannot hear Any three dimensional audio on my headphones and I cannot place the direction of where sound is coming from. Any fix for this. Playing on Xbox series X with Astro a 50s
Someone please help me!! I have just purchased some A40’s. I have installed and entered the Dolby Atmos code and I also have the Astro command centre. If I edit my EQ settings in the Astro command centre is that all I need to do? Or do I need to change the settings in the Dolby app? I’m trying to get my get the perfect settings for footsteps but can’t seem to get it right. Thanks in advance!!!
I have one question how do you hook up dolby vision becase my TV has it but it doesn't stay on the button please help
Whenever I put my audio setting to Dolby Atmos for headphones it changes it back to windows when I leave.
I have the astros a40tr the white mixamp, I can’t use my optical cable with my series x, I was looking at buying the Dolby app but is there a way to get the tournament EQ the astros have through this app or similar
With my headphones connected when I press the info button on my TV it shows stereo selected and not Dolby sound. Now when I remove the 🎧 it will show Dolby sound selected. Is that normal?
I have bought the Gear up rig 400pro and my microphone doesn't seem to work however the speakers are 100% fine aside from not allowing me to talk with friends
Do you no longer need the Dolby atoms for headphones app? It it just this one you need now?
I don’t know what to search to find the best audio for any game I search for what you recommend but nothing comes up that I’m looking for
I have a set of Razer kraken they have fantastic bass on everything apart from my xbox can I get more bass on them using this?
Yes, absolutely.
@@vypermajik and how do I do that dont really no?? Is there an option to boost or raise bass?
I did your setting it sounded good at first but now what I realized is everything overlaps until it turns into a loud noise it wasn't that good
I plug in my Astro Tr and it's not recognizing them??
Can anyone tell me why my Mic isn't working? This is a birthday gift from my brother and I'm trying to set this up. The sound and everything works but I can't figure out why I can't talk through the Mic..... Please help
My rig 500 pro one xbox one s keeps beeping when I plug it in and this is a expensive headset and idk what I did
Does this work with the Astro M80 mixamp?
Very simple demonstration. Thanks vyper.
My pleasure :)
Please help - randomly dolby vision is no longer an option in the dolby app under products. I've paid for it, it was working fine yesterday, but now does not show dolby vision. I only see dolby atmos for headphones and for home theater.
Do you see it in the Microsoft Store via your PC?
@@vypermajik randomly yesterday when I got on my Xbox it says dolby vision again under the products section. I didn't do anything different or change anything, not sure what happened but I guess I'll take out. Assuming an app glitch of some sorts.
@@vypermajik appreciate the response though thank you.
Does it still reset Everytime?
Mine never did... others had issues though.
@@vypermajik I checked it doesnt reset lol🙏❤️
I have a rig 500 hx and the audio works fine but the mic doesnt
i played with the settings and iam testing 3 brand new good headsets ! the app does nothing i dont hear any diffrence
I have a rig 800 and I have it on but it still doesn’t give me the setting it sais enable Dolby atmos
If you got the same headphones I did there was a code to redeem on the Xbox One. Did you do that?
vypermajik I have the same headphones and installed it and everything but one day it disconnected and now it won’t work..I tried a lot of things and get get it back on
vypermajik I have the same headphones and installed it and everything but one day it disconnected and now it won’t work..I tried a lot of things and get get it back on
Why would you start off with the end stuff first and put the beginning stuff in the end that’s kinda confusing bro
Sorry De'Angelo. It's a lot of information to explain without losing interest. According to RUclips metrics, rarely do people make it to the end. Am I THAT boring? ;)
I plug in my headphones and it still says in the settings tab about the warning to have your headphones plugged in. What do I do
How do I do it with wireless/bluetooth as I have rigs 800lx
If i leave it at game mode do i now have surround Sound because it Sounds so different when i select movie Mode?
Yeah, whatever setting you set, it remains there until you change it / disable it.
Thank u for it but how do I use a promo code bc I recently bought a headset and it gave me a promo code i can use which will let me use the dolby access for 2 years but idk where it is
unknown 2593 If you’re taking about the code to redeem, its via the Xbox Store Page and then Redeem Code. You can also sign into your Xbox account and go to Xbox.com/redeem.
Thank you so much that actually helped my apologize I just joined the xbox live community 3 months ago and I bought a headset since I play R6 competitavly and I thought headset will help instead of just the TV I really appreciate and keep up the amazing videod
Is this a one time fee? Or monthly?
Hi! One time.
Hi! One time.
If I have the astro a40tr's and the mixamp, should I turn off the dolby on my mixamp to make use of the dolby atmos on the xbox?
Yes I would!
I redeemed the code 2 years ago and it recently ended, I just bought another headset (rig) with a sealed code but it says "you already own this" why can't I redeem the code or renew the code?
Use another account
Does Dolby only work for special games?
Does this work for turtle beach 700 gen 2?
I dont get Enabled on the app all i get is Performce mode and it says on
came to make my headphones bass bosted
So when using dolby atmos in game do I put the audio settings to headphones or surround
I set everything to headphones personally
will this work with my wireless turtle beach head phones
Absolutely.
Bruhhh thx u so much, I bought a pair of rig 800 cans and they come with code but I didn't kno there was extra steps lol for a bout a month I haven't been getting the best value out of these now I am. Thxs again for making this video
Glad it helped :)
Will this work if I plug my headset's optical in directly to my tv's optical out? Xbox Series X doesn't have an optical out
It should run okay through optical but on my opinion always remove excessive connections as necessary. So if it’s possible to go straight from console then do that.
Got it working. had to setup atmos for home theater on Xbox Series X instead of headset.
Once you buy the license do you have to keep paying on it? And does it work for multiple headsets? And do you have to buy it again for like a TV Dolby access app?
It’s account bound. So one buy, per account. So carries from console to console, headset to headset - as long as your account is signed in, you can use it. And it’s a one time fee. Hope this clarifies. 😎
@@vypermajik yes. Thank you.
@@vypermajik I didn’t know this, for so long I thought it was subscription based and man was I missing out
What headset you use to connect controller & Dolby ?
Will this work with the Steel series Arctis 7x wireless headset?
Mine doesn’t say enabled
I got a40 and it still claims I need to buy it for my Xbox one
I like using Atmos. However using my Gen 4 Astro A40 TR’s w/ mixamp pro TR, playing COD Warzone, my team can’t hear me. I have to switch it back to stereo uncompressed for headset format, stereo uncompressed for HDMI audio, bitstream out for optical and Dolby digital for bitstream format. But whenever I have the Dolby Atmos app active my team can’t hear me no matter what
Anthony Rimmele Wow, I haven’t heard that one before (no pun intended!). I use a similar setup except on PS4 and I have been fortunate. I have struggled with Xbox settings before but usually it’s in what I hear vs what I transmit. Are you able to replicate the problem on PC? Wondering if your mike is faulty?
vypermajik I just game online via Xbox one. My mic isn’t faulty because whenever I switch headset format back to stereo uncompressed I’m able to communicate with my team. I’ve been extremely fortunate to have no bugs within my Astros since I purchased them... as soon as I posted this comment I realized that I was checking the box underneath headset format for optical or HDMI. I still haven’t played with a team but I’m hoping that I don’t have to retract my question due to negligence on my part lol I was just following the instruction set up from Astro. I guess I’ll let you know but I definitely appreciate your speedy response
Have you tried turning up your mic threshold in warzone?
the audio works for me fine. it’s just the mic. the mic doesn’t work and idk why. and i play rainbow 6 competitive and using the xbox app isn’t always fun for a mic. so is it a setting too or?
If you Have astro A40s I cab Help
How do you get this to work with wireless headphones?
Hi Stetson,
Very similarly actually. Make sure they are paired and on and the menu I showed should become available.
@@vypermajik It worked i just had to do a hard reset of the console then they started showing up! thanks!
Will Dolby Atmos work with my HyperX Cloud Stinger Xbox One license????
Yep.
@@vypermajik Thanks man
Its keep on saying my dobly atmos for headphones wasnt configured so i change it and it still says that any help?
Why can’t I change when I wanna have warm or detailed audio I got wireless Dolby atmos headsets