NOTE: For showcase builds and for aesthetic reasons I always use 4x DDR5 (remembering the good old DDR4) without XMP or EXPO, but this time I had one faulty stick with RGB and had to finish the video with 2x 16GB, which in the end is the correct way to build in this scenario. Just wanted to give you that information. Thanks for watching. 🤗
Nekoliko pitanja , koja ti je ovo pasta , imam ih nekoliko njihovih doma ali niti jedna nije crvena , vidim da si kasnije stavio šaraf za gpu sag , zar ne dobije ovo kućište nosač ko većina lian li kućišta i kakav je airflow ?
@@Helstar666 To ti je Kryonaut Extreme. Dobije se, ali iskreno, izbjegavam koji put to u ovakvim ne-recenzijskim videima, jer mi je ovo jednostavnije samo staviti i miran sam. Ono treba šarafiti i podešavati, a ovo i dalje izgleda sasvim ok. :)
Appreciate the video but would be really, REALLY useful if there was more explanation of how all the fans + AIO were setup and configured hardware/software. Thanks for your efforts.
@@PCCrazyDario Thanks for the prompt reply! Couldn't find the video in your channel. Would appreciate if you can point me to the relevant review? p.s. Music giving me 90s vibes lol
Awesome build. I plan on building almost the exact same setup over the next couple of months. I’ll go with the 120mm Infinity fans, and I just got my 7800XT Sapphire Nitro+ in yesterday! I’m so torn between the O11 RGB and the O11 Vision. I love the third glass panel on the Vision but I’m not crazy about the open space above the mobo. I guess could be filled in with a LCD screen of some sorts. I’ll probably buy all my other components and buy the case last, I’ll let some people upload builds and hopefully get some ideas from them.
Yeah, O11 VISION is visually pleasing when it comes to three sides of TG to watch your parts, but O11D EVO RGB has more space for fans, airflow and radiators for sure. :)
I just got the case today and will be building in it shortly, can you please tell me what fan configuration you used on all your fans? Bottom, the side and the rear, pretty please 🙏
@@PCCrazyDario Thanks so much, are there any issues with mounting the AIO with the tubes facing up instead of down? Almost all o11 Dynamic builds i've seen have the aio mounted that way but I've heard it can cause air bubbles and damage the aio
Thank you for the build, I’m curious on the AIO did you replace or add the LCD fans…Im building something similar and just interested as it’s my first build and air flow a new thing to me.
It is possible, but I totally forgot to try that out. Would look way better I am sure. Next time when I build a PC with GA II LCD 360, I will try that just to see how it looks in general. Thanks!
At Micro center, i don’t know anything about PC so i told the guy what i wanted, and i trusted his word, now i’ve been researching prices and reviews and everything he put together according to all the reviews i been reading is a solid build
@@jancelhuembes7204 i live in a place where the prices are abit weird in person and i dont have micro centre i really need those deals from microcentre lol im thinking about a 1600 dollar pc but prob waiting till middle to end of year till i get it
@@PhenomenalNFT Yes, you can go with bottom 3x 140mm fans. I presume you would be going with push/pull combo on the side. You have 116.5mm space on the side bracket when you push it towards the bracket at the back . This means, from the edge of the bracket to the GPU.
There is no controller needed for the GA II LCD AIO since it connects directly from the pump to the USB2.0 on your motherboard. I used the controller for the UNI FAN TL that comes in their triple pack. Basically, all fans inside the case are connected to one controller.
I will use a similar setup for my first PC build which going to be a all white build with nzxt h6 flow case, amd 7950x3d cpu, rx7900xtx taichi white Gpu, nzxt elite 360 aio and lian li tl LCD fans 🔥
Thanks! As for the second part of the comment, I'll add my thoughts as well. It's not O11 that much as the saturation of other fish tanks on the market and C/P of this case design. If that didn't exist, then O11 would be just another different epic looking case. My two cents. :P
Thank you. Actually I didn't. Since it isn't a review video and don't have to present it, I'd rather use something that doesn't need to be screwed in the case. This is much faster and easier, yet still look ok.
Fans with LCD screens? What is this world coming to? I'd be inclined to do a similar build with all AMD hardware and the Hyte Y70 Touch. So much RGB and LCD screen goodness, don't know if I could handle fun and beauty of that magnitude.
Hello ! Thank you for the vidéo ! I will doo the same build with little modification ! Graphic card : XFX Radeon RX 7900 XT (Founder edition) Processor : Processeur AMD Ryzen 7 7800X3D Motherboard : AMD AM5 Pro B650-S WiFi RAM : DDR5 G.Skill Trident Z5 RGB Noir - 32 Go (2 x 16 Go) 6400 MHz - CAS 32 SSD1 : WD_BLACK SN850X 1To M.2 SSD2 : WD_BLACK SN850X 2To M.2 HDD : Seagate Exos X16 12TO Power supplies : MSI MPG A850G PCIE Case : Lian Li O11 Vision - Noir AIO Watercooling (on side) : Lian Li GALAHAD II LCD 360 Fans (on galaghad) : Lian Li UNI FAN TL LCD Series Reverse pack de 3 with controller - 120 mm Fans (behind) : UNI FAN TL LCD Series Regular 120mm x2 Fans (bottom) : UNI FAN TL Series Reverse 120mm x3 Cable RGB : Lian li Strimer Plus V2 RGB + RGB PCIe VGA V2 Vertical mounting Kit graphic card : Lian li G4-4-V2X Vertical GPU Kit What you think about this ? Do you think the vertical graphic card will be ok with the kit ? (i never did it before) I will change the fans of the galahad like you ! Unfortunately there is no galahad with TL LCD fans :( And i will sell the basic fans of the galahad i think ! Thank you ;)
The best part is when you ignore the fact that the case has 3 glass panels which is the whole point and keep it open when taking the shots of the complete build lol
I ALWAYS record every single build without the side tempered glass because of the reflection. The main show and difference from other cases for this particular one is the front and top tempered glass and with them placed I didn't have any reflection from other stuff laying around in my studio. Videos such as these are mainly focused on the looks and believe me, reflection from the glass in this video would only ruin the visuals of the inner parts.
I did also build last week with 7900x and Galahad trinity performance with push pull fans and 39 at idle was the max with undervolt, and also i think that lcd have few degrees higher temp in idle compared to performance
@@Helstar666 I think for a reason the Performance version is called that way. It would have been really strange if the LCD would outperform the Performance version. :) Thanks for the input on the temps. :)
NOTE: For showcase builds and for aesthetic reasons I always use 4x DDR5 (remembering the good old DDR4) without XMP or EXPO, but this time I had one faulty stick with RGB and had to finish the video with 2x 16GB, which in the end is the correct way to build in this scenario. Just wanted to give you that information. Thanks for watching. 🤗
Nekoliko pitanja , koja ti je ovo pasta , imam ih nekoliko njihovih doma ali niti jedna nije crvena , vidim da si kasnije stavio šaraf za gpu sag , zar ne dobije ovo kućište nosač ko većina lian li kućišta i kakav je airflow ?
@@Helstar666 To ti je Kryonaut Extreme. Dobije se, ali iskreno, izbjegavam koji put to u ovakvim ne-recenzijskim videima, jer mi je ovo jednostavnije samo staviti i miran sam. Ono treba šarafiti i podešavati, a ovo i dalje izgleda sasvim ok. :)
It looks beautifull. I'm definitely gonna make it one day.
Appreciate the video but would be really, REALLY useful if there was more explanation of how all the fans + AIO were setup and configured hardware/software.
Thanks for your efforts.
This was a showcase build or timelapse. I have dedicated review videos regarding the fans and AIO, hardware + software explained. ;)
@@PCCrazyDario Thanks for the prompt reply!
Couldn't find the video in your channel. Would appreciate if you can point me to the relevant review?
p.s.
Music giving me 90s vibes lol
@@PCCrazyDariocould you link me to the review
Great editing with the asmr coming in eventually.
👏🏾
Cheers. Yeah, soon I'll release the videos hehe ;)
人类的科技结合，再创造出无限可能。beautiful~
Awesome build. I plan on building almost the exact same setup over the next couple of months. I’ll go with the 120mm Infinity fans, and I just got my 7800XT Sapphire Nitro+ in yesterday! I’m so torn between the O11 RGB and the O11 Vision. I love the third glass panel on the Vision but I’m not crazy about the open space above the mobo. I guess could be filled in with a LCD screen of some sorts. I’ll probably buy all my other components and buy the case last, I’ll let some people upload builds and hopefully get some ideas from them.
Yeah, O11 VISION is visually pleasing when it comes to three sides of TG to watch your parts, but O11D EVO RGB has more space for fans, airflow and radiators for sure. :)
Really love the look of the chrome version but the thermals scare me
I just got the case today and will be building in it shortly, can you please tell me what fan configuration you used on all your fans? Bottom, the side and the rear, pretty please 🙏
Nice! As for the configuration, side and bottom intake, two rear as an exhaust. It worked well for me and Lian Li actually suggests that.
@@PCCrazyDario Thanks so much, are there any issues with mounting the AIO with the tubes facing up instead of down? Almost all o11 Dynamic builds i've seen have the aio mounted that way but I've heard it can cause air bubbles and damage the aio
@@PCCrazyDario Will 1 rear exhaust fan work?
@@IllyrianM9will not hurt the aio.
@PCCrazyDario Hi, did u replace default fans in aio with lcd ones at 6:05?
Thank you for the build, I’m curious on the AIO did you replace or add the LCD fans…Im building something similar and just interested as it’s my first build and air flow a new thing to me.
You are welcome and thanks for the comment. I removed the original fans, placed them back in the box and used the TL LCD Reverse Blade ones. :)
All I've been seeing online are white 011 vision builds but in my opinion the all black looks sooo much sleeker.
Sure does look nice. :)
bend over
Was it not possible to have the tubes up and not down on the aio so it wouldnt cover the ram?
It is possible, but I totally forgot to try that out. Would look way better I am sure. Next time when I build a PC with GA II LCD 360, I will try that just to see how it looks in general. Thanks!
Man im addicted to watching people build pcs which i want but cant afford :D
Financing my friend, i actually scored a sweet deal yesterday paid a couple hundred dollars less
At Micro center, i don’t know anything about PC so i told the guy what i wanted, and i trusted his word, now i’ve been researching prices and reviews and everything he put together according to all the reviews i been reading is a solid build
@@jancelhuembes7204 i live in a place where the prices are abit weird in person and i dont have micro centre i really need those deals from microcentre lol im thinking about a 1600 dollar pc but prob waiting till middle to end of year till i get it
Great build! Does Lian Li 011 Vision support 3x140mm fans at the bottom?
Also, I am thinking of building push-pull AIO with this case using TL LCD for push and TL fans for pull. Won't there be any problems?
@@PhenomenalNFT Yes, you can go with bottom 3x 140mm fans. I presume you would be going with push/pull combo on the side. You have 116.5mm space on the side bracket when you push it towards the bracket at the back . This means, from the edge of the bracket to the GPU.
Out of curiosity the reason you can’t run 4 sticks is due to anything mhz over 6000 or even 6000?
So you replaced the INF fans on the AIO with TL120s instead? If so, do the TL fans work with the included controller?
There is no controller needed for the GA II LCD AIO since it connects directly from the pump to the USB2.0 on your motherboard. I used the controller for the UNI FAN TL that comes in their triple pack. Basically, all fans inside the case are connected to one controller.
@@PCCrazyDario got it, thanks. Lovely looking build by the way. I’m looking to replicate.
this is almost my exact build i just need help with the wiring if anyone has a video or link pleas please lmk
Aesthetically great build but the negative air pressure is kind of a nogo for me.
Cheers and of course, all to personal preferences. :)
I will use a similar setup for my first PC build which going to be a all white build with nzxt h6 flow case, amd 7950x3d cpu, rx7900xtx taichi white Gpu, nzxt elite 360 aio and lian li tl LCD fans 🔥
That will be one hell of a build for sure. :) Congrats!
amazing build
@@AdiAgeraRS Thank you very much!
Same build I have except I got the steel legend motherboard
How much you spend on this build
looks really cool. well done
Thank you very much! Glad you like it. :)
Nice build love the fans just bought 15...OUCH!! Side note...Is anyone else sick of the 011 builds as I am?
Thanks!
As for the second part of the comment, I'll add my thoughts as well. It's not O11 that much as the saturation of other fish tanks on the market and C/P of this case design. If that didn't exist, then O11 would be just another different epic looking case. My two cents. :P
Nice build! Did you use the included gpu anti sag stand?
Thank you. Actually I didn't. Since it isn't a review video and don't have to present it, I'd rather use something that doesn't need to be screwed in the case. This is much faster and easier, yet still look ok.
Fans with LCD screens? What is this world coming to? I'd be inclined to do a similar build with all AMD hardware and the Hyte Y70 Touch. So much RGB and LCD screen goodness, don't know if I could handle fun and beauty of that magnitude.
i have a ANTEC NX260 Can i control the fans (off and on ).
Hello !
Thank you for the vidéo !
I will doo the same build with little modification !
Graphic card : XFX Radeon RX 7900 XT (Founder edition)
Processor : Processeur AMD Ryzen 7 7800X3D
Motherboard : AMD AM5 Pro B650-S WiFi
RAM : DDR5 G.Skill Trident Z5 RGB Noir - 32 Go (2 x 16 Go) 6400 MHz - CAS 32
SSD1 : WD_BLACK SN850X 1To M.2
SSD2 : WD_BLACK SN850X 2To M.2
HDD : Seagate Exos X16 12TO
Power supplies : MSI MPG A850G PCIE
Case : Lian Li O11 Vision - Noir
AIO Watercooling (on side) : Lian Li GALAHAD II LCD 360
Fans (on galaghad) : Lian Li UNI FAN TL LCD Series Reverse pack de 3 with controller - 120 mm
Fans (behind) : UNI FAN TL LCD Series Regular 120mm x2
Fans (bottom) : UNI FAN TL Series Reverse 120mm x3
Cable RGB : Lian li Strimer Plus V2 RGB + RGB PCIe VGA V2
Vertical mounting Kit graphic card : Lian li G4-4-V2X Vertical GPU Kit
What you think about this ?
Do you think the vertical graphic card will be ok with the kit ? (i never did it before)
I will change the fans of the galahad like you ! Unfortunately there is no galahad with TL LCD fans :( And i will sell the basic fans of the galahad i think !
Thank you ;)
The best part is when you ignore the fact that the case has 3 glass panels which is the whole point and keep it open when taking the shots of the complete build lol
I ALWAYS record every single build without the side tempered glass because of the reflection. The main show and difference from other cases for this particular one is the front and top tempered glass and with them placed I didn't have any reflection from other stuff laying around in my studio. Videos such as these are mainly focused on the looks and believe me, reflection from the glass in this video would only ruin the visuals of the inner parts.
Lol thought the same. Don't give the haters attention
zajebiste są te wentylatory od lian li wydajność pewnie taka sobie no ale opcja ekstra
Dla mnie głupota , wciskać mini ekranik byle gdzie , jak by mogli to w śrubki też by dodali 😅😅😅😅
That 3 way split screen sucks.
You mean on the fans? I can guess that is that, since there are no other seperated screens. :D
@@PCCrazyDario no. At 5:31
Why is that cpu idling at 46C lol
Because it is stock, no undervolting or anything. These CPUs run like that.
I did also build last week with 7900x and Galahad trinity performance with push pull fans and 39 at idle was the max with undervolt, and also i think that lcd have few degrees higher temp in idle compared to performance
@@Helstar666 I think for a reason the Performance version is called that way. It would have been really strange if the LCD would outperform the Performance version. :) Thanks for the input on the temps. :)
bad radiator displacement
may quay sat qua
nice 👍🏻
Thanks a lot! :)
Worst place AIO cooler
You got to be kidding me right... 🤣🤣🤣🤣
Educate yourself: ruclips.net/video/DKwA7ygTJn0/видео.html
First sentence says everything!
😂😂😂 ok. just a little thinking.
😊за место таких винтов можно купить 4090😅ну вид😎🔥🧯
Like the video please
Cheers! :)