Pulse Induction Metal Detector "Spirit Pi 4 Pro A"/ New version
HTML-код
- Опубликовано: 28 сен 2024
- Pulse Induction Metal Detector "Spirit Pi 4 Pro A"/ New version
The new version of metal detector is ready. We will have three different versions with the same board. This version of this metal detector will be the most simple, this version does not need a screen or a smartphone, works with a speaker. The second version will be with LCD screen and the third with smartphone. For all three versions we will use the same board only change the sketch for arduino.
If you want to support my projects you can do it here:
www.paypal.com...
My web page:neco-desarroll...
#SpiritPi #PiMetalDetector
Hi, can you tell me where I can find the complete adjustment procedure, what info should be on the LCD for the adjustment, I can only adjust pin 1 of the ic if the coil is not connected otherwise et1 pen1 always 11.4v. I have already tried a few settings and I can detect only large objects but the sensitivity is still low I have to keep the object within a few cm before the detector reacts.
Hi Sergey, I watched all your movies about the Spirit PI 4 Pro in both the English and Spanish versions, what strikes me is that in the Spanish versions you tell things that I don't find in the English spoken movies, because I don't speak Spanish speak or understand it is difficult to know what you mean. Is there a video of yours somewhere that contains all the information?
Nice work
lovely cat
will you make normal coil detector
If put arduino where did you connect what part?
I have an idea. Can you make a functionality in the app that will log the return signal strength and the gps location to a csv? There might be an option to configure the interval in s or ms, or even log the position if the signal has changed with a certain value... Of course, this will require steady hands, but can be used to make a heatmap of an area.
Waw good 👍👍
hi friend very nice video when you will show how to build it
Soon
nice vid bro but
if you can make a metal detector with discrimination
This type of metal detector can have discrimination
And do you have an open source app if yes where can i find it because i want to add some tweaks
Use 7.5jk pulse i think you will be impressed
show
Sy mau pesan.Bisakah.?
Hola la verdad descargue tus archivos y me sacaron las ganas de todo, xq los abris y no se leen, salen raros, escritos con dificultad, los graficos no salen, las carpetas vienen vacias, la verdad malisimo.
How much friend
What do you mean?
You sale this circuit board
@@mass6692 not yet, for now i only show how to build it, it use cheap components and easy to assemble, i will show in the next vidro how to build it
@@n.e.c.o-en7717 ok friend 30 dollar loss
ruclips.net/video/CEdJxjpNc1Q/видео.html
Gentlemen, I would like to know if to all those who made the metal detector this has worked since the first moment. Unfortunately I, despite having mounted both cards, I cannot make them work. I followed all the Neco tutorials but I'm still in the initial state. Can you tell me if you had any problems. In this case I would be more peaceful. Thanks for your answers
hey bro .. i would like to ask about coil .. if any size of coils compatable with this type of pulse indction?
Yes, but if it us very big size (50cm ) or more may be you need to adjust the circuit
@@NecoRuChannel plz can you explain? and what is the recomended coil size and its turns .. i already make this circuit but no response :(
@@electrotech2389 Right now i make a tutorial " How to make this metal detector step by step". The coil diametr 20 cm, 25 turns, the wire 0.5mm. You need to adjust R3 , you must get in GND and Pine 1 of the U3 7.5 votls. And resistance R16 must be 20k
Okayy bro i understand just a little bit.. If i got 7.5 volt on the the number one of U3 but nonresponse too... WHAT IS THE SECOND VARIABLE RESIDTOR DO?
@@electrotech2389 If the pin 1 of U3 is "0" some thing wrong in the power part. Make sure when you put a speaker near from the coil you can hear some sound
Hi Neco, do you have a diagram and gerber file to use the common AI-thinker ESP32-Cam micro-controller boards?
Thanks in advance for any suggestions.
Hi, just like Claudio Scatena I can't get my built detector to work, in the video R3 adjusts the voltage on pin 1 of U3 to 8.00 volts, but with me that voltage always remains at 11.42v. If I control R3 the voltage on both pin 2 and pin 3 of U3 changes but there is no change on pin1. If I disconnect capacitor C1-2 I can adjust the voltage to 8.00 volts what is the problem ????
تمام این کلیپ ها کسو شعرن Greatliar
how can i order this item please help...??
Show parabéns agora e esperar um com discriminação abraços
Thank you! I am working on discrimination! Hope soon i will finish
@@n.e.c.o-en7717 hola buen dia quisiera saber si puedo una una bobina doble de detetora de metales pirata ruso porque tiene dos dispositivo y dos negativo
Will build one and report. Thanks
Thanks! If you will have any questions please ask!
@@n.e.c.o-en7717
your Gerber vs black white print is different
no track on the bottom side from Gerber files
should I follow the black-white print?
@@detectormaniaindonesia8131 What do you mean? I order with this gerber file in JLCPCB service and get good quality pcb. So there is every thing OK
So how to make one?
Bonjour j'ai envie de réaliser un détecteur de métaux PI
Je souhaiterais avoir plus d'informations
nice electo sounfd !!
The 8 bit sound horror! Like detecting on an atari!