your project is Awesome!! I have a question.. Can I use ttp223 touch sensor instead of manual switch .. ? I am waiting hear from you!! Please reply ASAP!!
Hi can we read an analogue value at the esp pin and relay it to alexa interface. Value to display eg: room temperature, automation based on conditional switching of output based on the value read at esp pins?
Hello Subhajit first of all, congratulations for the projects you develop and share. Having developed and prototyped pcb of similar projects, I wanted to ask you what software you use for the creation of pcbs. I wanted to start from yours, done very well, and modify it to add a section in which to insert the Power Supply Module Hi-Link HLK-PM01 AC-DC 220 V to 5 V, you can share the starting file, not the gerber, to allow me this change? Obviously I would share the work done again Thank you
How about the power supply of really board and esp32 .... It working properly .. but the problem is power supply is very big I choose 5 v.10 amp. Power supply it doesn't fit inside the metal box ..is there any idea to solve the problem .. please mention the accurate power supply for the boards
I congratulate you on all your projects, I have set up one of yours. I would like to know if you could join two of the projects you have? This one and the one for the led strip regulator. Thank you for your great work.
Hi dear friend Can I use IR remote to control for example 20 relay , That is mean I have to use button 1 twice to get number 11 And I have to press buttons 1 and 5 to get number 15, How can I make the code And thank you so much 🙏🌹👏
Hi..your video is awesome.. Is there any library for google assistant like the you have used for alexa integration..Can you make a video on integrating google assistant with esp module without blynk r adafruit r without using any 3rd party integrations..
@@TechStudyCell I mean, if I create two automation projects for two rooms like this one I did and give each switch a name that distinguishes it from the other, will it work?
I need control 4 device via alexa, Google voice and manual switch. Not via any 3rd party app directly via alexa, google Can you please share the information above requirements.. please.. I have seen a video but its for 8 device
This project hv one problem... after boot up its need to connect wifi at Least once... then remote or manual mode works...no matter now wifi connected or not... but if ifter boot it left not connected the no modes works...
Hi dear good product now every errors are solved except after 24 hours the wifi led is getting offline ,then we need it restart , after restarting it it works again 24 hours any way good thank you
HELLO I LIKE YOUR PROJECT. HOW DO I USE ANY WIFI WITHOUT HAVING TO PROGRAM ARDUINO THE PASSWORD AND USER. HER THAT THIS PANEL OF YOURS CONNECTS TO ANY WIFI?
"Cannot connect to wifi. So manual mode" their is a bug here if initally we dont conntct it to wifi we cannot use the manual mode. If used the IR remote button program crashes with an error Guru Meditation Error : Core 1 panic'ed (loadProhibited) Any solution??? Thankyou 😀
Hello friend, I am watched ur all home automation vedios :) .pls help me in our house we building a big home automation and I am want Google assistant+blynk+bluetooth+infrare d pls we trust u a lot pls help us
![[IN HINDI] ESP32 - Google Assistant | Amazon Alexa | Manual - Home Automation IOT Project](/img/1.gif)
your project is Awesome!! I have a question.. Can I use ttp223 touch sensor instead of manual switch .. ? I am waiting hear from you!! Please reply ASAP!!
Adding IR control is awesome work
👌👌👌👌👌
Thanks
@@TechStudyCell
Can you please do
Google assistant + Blink App
with 8 relay module for us..?
( GOOGLE + BLINK TO 8 RELAY )
Hi can we read an analogue value at the esp pin and relay it to alexa interface. Value to display eg: room temperature, automation based on conditional switching of output based on the value read at esp pins?
Awesome Work,
Please Add GOOGLE ASSISTANCE + BLINK APP TO 8 RELAY MODULE
PLEASE SIR ❤️ 🙏🙏🙏
Hello Subhajit
first of all, congratulations for the projects you develop and share.
Having developed and prototyped pcb of similar projects, I wanted to ask you what software you use for the creation of pcbs.
I wanted to start from yours, done very well, and modify it to add a section in which to insert the Power Supply Module Hi-Link HLK-PM01 AC-DC 220 V to 5 V, you can share the starting file, not the gerber, to allow me this change?
Obviously I would share the work done again
Thank you
Hello subhajit,
Can i purchase PCB of these project directly from you..adding power module on the board is a good suggestion from Gianpic69
How about the power supply of really board and esp32 .... It working properly .. but the problem is power supply is very big I choose 5 v.10 amp. Power supply it doesn't fit inside the metal box ..is there any idea to solve the problem .. please mention the accurate power supply for the boards
hi min, any video using google home or google home mini to control it?? please share if have,
Can this project be upgraded to use the EEPROM on the pin state?
Kya ye mai daily use karsakte hu means ye bigad nahi jaega na?
Great job. I'm struggling to find the components online to solder on pcb.. Plz provide a link to buy all components
best home automation ever
thanks for sharing all the detail
also add google home support
Thanks
@@TechStudyCell If possible try to make wifi login page and add google home support
Awesome project...Thank you.
Welcome
Ir control is awesome 👍👍👍🔥🔥🔥❤️❤️❤️
Thanks
Thanks for the video bro.In your first code of ir hex generator the 9600 baud rate do not work, 115700 is working please correct me if I am wrong.
Please check the baud rate mentioned in the code, then select.
Sir, will it work with 16 nos of relay?? If it then make a video on 16module relay kit.
How to include eeprom facility?
Thanks for such a great video. Can we use Node Mcu instead of esp32?
Yes. But with NodeMCU you can control 3 relays. Will make video on it
I congratulate you on all your projects, I have set up one of yours. I would like to know if you could join two of the projects you have? This one and the one for the led strip regulator. Thank you for your great work.
After sync all the device can we work with Alexa from the other network
hola, una duda, yo no tengo el echo dot... porque la app del telefono no detecta por si sola a la ESP8266 sin el echo dot?
Thanks bro its really very helpful. Keep it up.
You are welcome
Can you please make video for Google assistant+remote+Bluetooth+manual
Hi dear friend
Can I use IR remote to control for example 20 relay ,
That is mean I have to use button 1 twice to get number 11
And I have to press buttons 1 and 5 to get number 15,
How can I make the code
And thank you so much
🙏🌹👏
Are you selling your PCB's, I would like to buy.
buy someone managed to assemble the project on a pcb, does anyone have the links to related components?
Can you build the same project using FIREBASE instead of blynk? It would be very helpful ☺️
Okay. Noted
Could you please make an automation video being a garage gate with course limits (Gate fully open and fully closed) with ESP32 and NodeMCU ESP8266
Can we add google assistant without sinric or ifttt?
Jde to pak ovládat podle času, jako časový spínač?
Bonsoir je n'arrive pas à connecter blynk sur mon ESP32
Full ready circuit board 👍
Its really amazing and thanks to share all this very helpful things with us. Can we do same thing with sinric pro.
Already made video with Sinric Pro ESP32
Very good information
Thanks
Nice project... So can you make it using alexa and Bluetooth app
Hi..your video is awesome.. Is there any library for google assistant like the you have used for alexa integration..Can you make a video on integrating google assistant with esp module without blynk r adafruit r without using any 3rd party integrations..
Sorry. Still I have not found any alternative for Google Assistant
Please try to do so for Google mini users
This is very good but plzz make it for Google assistant also without using any third party services like ifttt
Can you build the same project using multiple esp32 pls..
ok noted...
how to change the sketch if using the Arduino mega wifi robotdyn board? Thanks
Can this project work only with alexa mobile app without any other alexa device?
No. You need one Alexa device
Nice video thanks
Welcome
4 relay module only, is it possible.?
I think there is no difference between code for buttons and code for switches.so can we upload any 1 of them for both?
Is it possible to automate two or more rooms... and connect them to one Alexa echo dot device???
Yes
@@TechStudyCell I mean, if I create two automation projects for two rooms like this one I did and give each switch a name that distinguishes it from the other, will it work?
I need control 4 device via alexa, Google voice and manual switch.
Not via any 3rd party app directly via alexa, google
Can you please share the information above requirements.. please..
I have seen a video but its for 8 device
Sir apka previous video me me ehi wala idea apko batana chahata tha ki sab tarah ki control ek hi esp32 me laga dijiye
Hi Friend Im one of your subscribers Can you please make a video also with LAN Base Internet Controller.
Thank you and God bless
awesome bro i am great fan
Very useful. Thanks for sharing 👍👍
Welcome
sir. eik video push button aur blynk par banaye plz..8 relay wala..aur wifi code upload karne ke bad mobile se dale.aur wifi reset button option be ho
Very cool project thanks.
Welcome
nice!! thank you!!
Welcome
nice, can it also be done with google home?
No
Time out waiting for packet header, even i selected DOIT ESP32 DEVKIT V1
Programming the ESP but Alexa app not found it. I try searching in 10 time sir please help me why it problem.
You are awesome
This project hv one problem... after boot up its need to connect wifi at Least once... then remote or manual mode works...no matter now wifi connected or not... but if ifter boot it left not connected the no modes works...
Will the manual switches work if the nodemcu is off ?
No. You can control appliances from switch without internet
How can i flash my esp showing error like size reduse sketch code error
Hi dear good product now every errors are solved except after 24 hours the wifi led is getting offline ,then we need it restart , after restarting it it works again 24 hours
any way good
thank you
HELLO I LIKE YOUR PROJECT. HOW DO I USE ANY WIFI WITHOUT HAVING TO PROGRAM ARDUINO THE PASSWORD AND USER. HER THAT THIS PANEL OF YOURS CONNECTS TO ANY WIFI?
Hello... I want some help from you... Is there anyway where I can contact you... It would be awesome if you can clear my doubts and guide me
You can ask your doubt here.
"Cannot connect to wifi. So manual mode" their is a bug here if initally we dont conntct it to wifi we cannot use the manual mode.
If used the IR remote button program crashes with an error
Guru Meditation Error : Core 1 panic'ed (loadProhibited)
Any solution???
Thankyou 😀
Getting error 'class WIFICLASS' has no member named 'mode' .......plz help me sir... please
Can we use google assistant instead of alexa device
No
Muy buen proyecto como seria para ponerle un acces point
is it possible to do blybk + bluetooth + ir in node mcu esp8266
Esp8266 don't have Bluetooth...
I don't have an Echo with me.....What can i do so.......?
ESP_RMAKER_PARAM_RANGE was not declare in this scope error 😭😭?
Thanku nice ..can you please make home automation using firebase realtime database with manual fedback system ....
Yes, sure
@@TechStudyCell 🥰
Please make video on gsm module
Okay
Bro plz make this project to control without Alexa echo dot
Sir i am not able to get the HEX code please help
Sir Is it possible this works without the echo dot
No.
I want to connect extra blue led for wifi connection and red for wifi disconnection by gpio pin please help
Wifi not reconnecting automatically please help
Very nice project sir
Can we add Node MCU Esp8266 in place of esp32 what are changes in code.
Sir super...
Thanks
I can't get any hex codes but continuously some code is blinking in serial monitor 😢 please help me
Zero crossing issue is there please check that and solve, if it's there then we can't using permanent esp8266
Same coding can be use for nodemcu 8266?
No.
@@TechStudyCell can u provide coding for Nodemcu 8266 for this project...plz request
Sir plz give me for esp8266
Sir plzzzz make same with eps8266
sir plz give me code for alexa with IR for nodeMcu 8266...plz sir must replay
Can we close the Alexa app in mobile after all the devices are connected?
Yes. You can close the Alexa App
@@TechStudyCell Do I need to reconnect all the devices again if I turn off echo dot??
This project is work on esp8266 ?
you have modify the code and circuit for ESP8266
@@TechStudyCell pls Share the circuit and code for esp8266
you can add to this as well as this Blynk
Error = Class WifiClass 'has no member name 'mode' please help sir
Same here bro
Does this work with Google home
No
Sir now please make vedio with firebase
Okay. Noted
I tried with a VS1838 and it didn't work :(
Make a code.for reconnecting wifi automatically, This project is awesome the only issue is auto reconnection..
It may take some time to reconnect.
Alexa no search the devices. And I also try different time
Ciao bel video non ci sarebbe un modo per trasmettere in italiano ..👍
Hii
Remove push button in custom made pcb and add HILINK AC to DC PCB Mountable Step Down Power Module DC 5V so
Kindly provide complete code
You can download the code from the article. Link given in description
tt go t call door sensor on blink app
fan dimmer on alexa using ESP 8266
(r1-r8) iska matlab kya hai
Using ESP8266 bord
Ok. will make video on it. You can also check ruclips.net/video/OJ4CzWyRQr4/видео.html
blynk + ir on esp8266 is possible plz make video about it
IR not working
Hello friend, I am watched ur all home automation vedios :) .pls help me in our house we building a big home automation and I am want Google assistant+blynk+bluetooth+infrare
d pls we trust u a lot pls help us
Pls my friend help us
Sir I want PCB and I pay you
Please send email to connect.techstudycell@gmail.com
😂😂
Please, something else than home automation. It's not much interesting now. Peace.