Excellent very educational video. Could you please make another one with the thermostat function. With DS18B20 and also with DHT11 I thank you in advance
please guide me master. I plan to install 2 DS18B20 temperature sensors. I don't use IR & LDR. what is the correct sketch for replacing the IR & LDR sensor with a DS18B20 temperature sensor. thank you very much, may you be blessed
Guru you need to mention which ESP32 to use in the sense what kind of PSRAM and Flash memory cause I am getting the error Compilation error: text section exceeds available space in board and I am at a loss since I cant even return the item. I had Put this question on another video but you haven't replied yet. Please reply.
I have succeeded in making it with the tutorial provided. how to display on dashboard esp rainmaker? because after I entered the ESP Rainmaker dashboard, the board was not recognized. Thank You
I ha e ESP-32S module , I upload successfully 4 ch relay program but now my wifi link not work. Before uploading program Red and Blue LED are blinking. Do you have any suggestion to reset module to get wifi active.
Sketch uses 2026525 bytes (154%) of program storage space. Maximum is 1310720 bytes. Compilation error: text section exceeds available space in board I am getting this error even if I selected ESP32 Dev Module and RainMaker Partition. Please Help!
Hello, I turn off the wifi and change the state of the relay, after returning the wifi signal the Esp RainMaker app does not update with the changes made offline
How to define standard device type in the code ? for example in the documentation we can see tv speaker outlet etc. But when i use it in the code it says that it is not the standard device type .
excellent projects i have don 4 projects but i am facing 1 problam if i change wifi router how to connect i am tryed with boot button long pressing, bluethooth is connecting after that wifi network details not getting can you please tell me what can i do
Hello, thanks for this video/project. You are a genius. Circuit and code is very well working perfectly, but sometimes, all the relays switches ON without any intervention from Alexa or Rainmaker App. Once all the relays are ON either app or alexa cant switch them off, they have to be switched off by powering off the circuit. Do you know the reason for the same?
How does an electronic circuit work without Neutral The Chinese are also working to control the lighting of smart homes Can you explain this type of circuit to be used in the projects you design?
It is very useful project for startup company but need also the meter Reading shown in mobile phone like on esprainmaker. Upgrade it to show power consumption details
i have worked on this using rainmaker but when i disconnect usb cable(which is conected between laptop and esp32) after that it is not working can you please let me know how can i makethis project work by just connecting esp32 to a power adapter or power bank so it can be portable
Thank you for the project sir, how many devices can be used in this project sir? I want to try this for my home automation, and I have many devices like 12 lamps and fans
Hi, good job, and I hope someone can help me with this question How many devices can we use in ESPRAINMARKER for free, and once we reach that limit what will be the price per device, because the website is not clear enough about prices :v
Hi, I am experiencing problem with this set-up how can I fix it? hope to here from you soon below are the errors: E (123720) esp-tls: [sock=48] connect() error: Host is unreachable E (123720) esp-tls: Failed to open new connection E (123720) TRANSPORT_BASE: Failed to open a new connection E (123724) MQTT_CLIENT: Error transport connect E (123728) esp_mqtt_glue: MQTT_EVENT_ERROR
As usual Gr8 Project bro... Adding EEPROM will make this project even better. Waiting for it.
Sir please also add blutooth control and eeprom memory in this project.
Can you add EEPROM code in this program to remember last status.
I had watched a video with EEPROM Code used in a project of ESP32
Excellent very educational video.
Could you please make another one with the thermostat function.
With DS18B20 and also with DHT11
I thank you in advance
please guide me master.
I plan to install 2 DS18B20 temperature sensors. I don't use IR & LDR. what is the correct sketch for replacing the IR & LDR sensor with a DS18B20 temperature sensor.
thank you very much, may you be blessed
Please the RainMaker project adding Fam dimmer.
Working on it. May take some time
How the 220v is converted to 5v can anyone explain it please
Guru you need to mention which ESP32 to use in the sense what kind of PSRAM and Flash memory cause I am getting the error Compilation error: text section exceeds available space in board and I am at a loss since I cant even return the item. I had Put this question on another video but you haven't replied yet. Please reply.
Is can we use "ESP32 D1 Mini" instead of "ESP32" with Rainmaker?
Hi
Can you please send the BOM and pick and place files for SMT services to use this pcb
Thank you so much indeed. Please how to implement local network control (without internet) from the app.
Thank for yoru video.
I have a problem. Temperature not auto update in ESP RanMarker App. Can you help me. Thank you
I have succeeded in making it with the tutorial provided. how to display on dashboard esp rainmaker? because after I entered the ESP Rainmaker dashboard, the board was not recognized. Thank You
Hey! Thank you very much for this project! I have a question, how to turn off the LEDs on the esp32 so that they do not glow all the time?
is this project save the previous data before the power shutdown?
is it possible to make same system through esp5266 node mcu wifi module
Can extend more outputs with shift registers ic in esp8266 ?
EpRom function avaleble in your code for sudden main supply gone then previous state remains
Is there any way to program node mcu with rain maker
Future projects can make walking lights for stairs
Where we want to buy that pcb board in online...
Please do you sale ready it's?
Sir please make project which can be control with the New Blynk app, Google, Alexa, IR and Manual using NodeMCU esp8266 and use also EEPROM
I ha e ESP-32S module , I upload successfully 4 ch relay program but now my wifi link not work. Before uploading program Red and Blue LED are blinking. Do you have any suggestion to reset module to get wifi active.
Sketch uses 2026525 bytes (154%) of program storage space. Maximum is 1310720 bytes.
Compilation error: text section exceeds available space in board
I am getting this error even if I selected ESP32 Dev Module and RainMaker Partition. Please Help!
In this project can you use preference.h liberary.....It is posible???
can i change the lamp into the socket plug ?
any need to change the wiring ?
hello
can someone tell me which SimpleTimer lib used in this projetc?
Kya ye project supply jane pr apne privious State ko follow karta h ?
could you please share the schematics of the board design you have given in the video link this will help me a lot thanks in advance
I need connect really in side right and conect the switch in side left
What distance control it
Can we use same circuit with multiple Esp32 in rainmaker
What then if light goes out what will be the relay state and what will be the state of relay after light comes .
Please add eeprom in this particular projects or send me the code link
Celling fan on off is off all light and not working any switch and remot and esprainmaker app also ???
thank u sir for making this project with my request🥰😍😊
Glad it helped
Bro can you explain it for me 😭
@@srikanthpatel100 yes how can i help you?
@@alreansajid9418 bro can you give your contact number I want to make this project I am confusing 😔
How to give 5v supply@@alreansajid9418
Esp rainmaker its lifetime cloud? We can to purchase some lifetime key or not?
Please add fan dimmer in this project make vedio and upload
Make changes in code to connect automatic with network when wifi come back
It will connect automatically if network available
Hello, I turn off the wifi and change the state of the relay, after returning the wifi signal the Esp RainMaker app does not update with the changes made offline
Can we add bt to it
you make only esprainmaker remote control
Add EEPROM and manual switchs as two way switch . Nice 👌
What is eeprom
How hard reset esp8266 v2
Please make a vedio for it
Thank you bro
Sir kindly add preference library in this code .... Please make a video about it
How to define standard device type in the code ? for example in the documentation we can see tv speaker outlet etc. But when i use it in the code it says that it is not the standard device type .
Which PCB manufacturer in India would you recommend to buy the PCB
excellent projects i have don 4 projects but i am facing 1 problam if i change wifi router how to connect i am tryed with boot button long pressing, bluethooth is connecting after that wifi network details not getting can you please tell me what can i do
Hello, thanks for this video/project. You are a genius. Circuit and code is very well working perfectly, but sometimes, all the relays switches ON without any intervention from Alexa or Rainmaker App. Once all the relays are ON either app or alexa cant switch them off, they have to be switched off by powering off the circuit. Do you know the reason for the same?
How does an electronic circuit work without Neutral The Chinese are also working to control the lighting of smart homes Can you explain this type of circuit to be used in the projects you design?
With a capacitor u can do it
@@dhanushkadxx can you please explain how to do this
☺👍..is there a feature for the doorbell? Tq
I am facing q issue while connecting with rainmaker app
Device disconnected
You always good again great project
If u do fan speed control, water level sensor, door sensor. Etc ......
Can you add fan speed regulator control to this project
It is very useful project for startup company but need also the meter Reading shown in mobile phone like on esprainmaker. Upgrade it to show power consumption details
Please add fan speed control to Home Automation using Rainmaker
Working on it. May take some time
Device disconnected
Error is coming when rainmaker app connects to wifi
Blue turns on but deivece disconnected
Hello brother,,,ir remote not working... please give me a solution
By using this circuit can I turn on switch automatically with temperature sensor ? When an optimum level of temperature reaches.
yes. but you have update the code
@@TechStudyCell thank you.
which portion needs updation ?
Is there is any tutorials available in your channel ?
Hii sir ......do the video smart switch works on smart life app
Hii! Could you please let me know!!! What is the purpose of LDR here?
to see it is dark or day
i have worked on this using rainmaker but when i disconnect usb cable(which is conected between laptop and esp32) after that it is not working can you please let me know how can i makethis project work by just connecting esp32 to a power adapter or power bank so it can be portable
deep explain plz this is not perfect
This circuit not compatible ac celling fan ???
Can we update from anywhere in the world?
You are a great brother
Can you help me create an electronic trash can system with ESP32 and GPS??
can we use nodemcu for programming instead of ESP32
no
@@TechStudyCell Thank you bro
friend ,,,please can you make video control relay and module sim800l with commend sms and dtmf.
Thank You....🙏🙏
Pls. Add last status of light. Eeprom.
Thank you for the project sir,
how many devices can be used in this project sir? I want to try this for my home automation, and I have many devices like 12 lamps and fans
_It's can add latching action_
Hi, i couldn't find the "simpletimer" library... do u have the link, awesome video!
at the top of the libary in search simpletimer
keep geting this error-- Compilation error: no matching function for call to 'SimpleTimer::setInterval(int)'
Bro can you please add one more parameter based on temprature contro also plzzz
Plz sir tell me how can i add touch sensors in place of that push buttons plz sir plz i request you
yes do changes in the code plz
Você e o melhor do mundo! Eu acho que de toda Galaxy sideral 😁😁😁
Can I use 5v 1amp for supply
5V 2A
How to download library and install
does it has eeprom
Hi,
Can we add ultrasonic sensor water level monitor in this project?
yes you can
Would you please make a 4ch automation with esp 8266 and esp rainmaker
You have to use ESP32 for rainmaker
how many node can be add to the esp rainmaker app? is there any limitation?
5 to add more node email on rainmaker to add more
Hi, good job, and I hope someone can help me with this question How many devices can we use in ESPRAINMARKER for free, and once we reach that limit what will be the price per device, because the website is not clear enough about prices :v
Sir there is too problem but I don't understand why it come I do perfect everything
Can connect to 2 or more esp 32 to one rainmaker app
I have faced issue while connecting multiple ESP32
Brother, please add ethernet port for excellent internet connection with this setup, please, please, please.
Again a great video :-)
Short question: Can you also make a video where only 4 relays are controlled with the appropriate PCB ?
Okay. I will share the code in article by next week. Thanks
sir
how i can istall drivers wich esp you are using in video???\
kindly reply fast
thanks.
Alguem sabe como resolver este erro? Compilation error: SimpleTimer.h: No such file or directory
BRO PLEASE ADD FAN CONTROLL IN THIS PROJECT
thank you sir, very good project, does rainmaker app also work for nodemcu esp 8266?
No
good job and excilant sir
Thanks
Software ??
Perfect combination
BRO WE CAN ADD NODEMCU ESP8266 INSTEAD OF ESP32,BRO WHILE IT WRITE AS NORMAL CODE, AND IT WILL WORK OR NOT BRO
No
Hi, I am experiencing problem with this set-up how can I fix it? hope to here from you soon
below are the errors:
E (123720) esp-tls: [sock=48] connect() error: Host is unreachable
E (123720) esp-tls: Failed to open new connection
E (123720) TRANSPORT_BASE: Failed to open a new connection
E (123724) MQTT_CLIENT: Error transport connect
E (123728) esp_mqtt_glue: MQTT_EVENT_ERROR
plz watch the techiems rainmaker problem videos to fix it
Kindly add fan speed control in this project
Can we add 10 relay in this circuit ?
Yes
changes in the code also
Good job
Thanks
perfect 👍👍Sir make arduino iot cloud and alexa base bike on and off system and gps tracking for bike using esp 32
i need esp8266 projet smart home