Rear Differential Service Kia Sportage 2004-2010
HTML-код
- Опубликовано: 14 ноя 2013
- In this video we show how to service the rear differential on a 2004-2010 Kia Sportage.
If you have any further interest please visit www.2carpros.com/questions/new where you can ask any car questions.
*Disclaimer: Please use all safety precautions Авто/Мото
Always loosen the FILL plug first. If you drain and can’t get the fill plug out you’re hosed.
You have to get it out one way or another. Can't just leave the old fluid in there forever. Thanks for watching!
thanks nice tutorial
Thanks for the video!
Remove fill cap first, then the drainage. Drained liquid with no way to fill if the fill screw gives you trouble.
Pro tip there sir!
On the money with that tip.
Nothing worse than draining a differential THEN finding out the fill plug is seized...
Right on
@@kalani1987left off
can you do a oil change for the 2010 diesel turbo
What fluid did you use owner's manual calls for shell spirax ax 80w-90 can't find it anywhere
How many oil liters we have to use?
Kakvo ulje stavljate u deferencijal a kakvo u menjac?Hvala.
Hi guys trust u r well i drive a kia sportage i have it 3 mnths its a automatic i want to ask how do i change the bulb in the gear selector pls
Hi, how many liters required to full this box?
The appropriate amount 😂😂😂😂
Is there a filter for transmission oil?
For the transmission yes but this video is on the rear end. Thanks for watching!
what size socket this needs
Paused the vid at the end - closed wrench he used is 15/16
1. Always remove diff fill plug first could be seized. 2. Never use an impact to tighten bolts really big mistake on this. Torque to specs when possible. 3. Motocraft oil in kia? Otherwise great vid.
You have to get that plug out no matter what. Using an impact is fine honestly we have been doing it for years. The brand of oil doesn't matter as long as the viscosity and synthetic rating meet the requirement. Thanks for watching!
I understand your point but why not show viewers the correct way to do this procedure for DIY people(myself). You see my point.
@@williamacosta6337 shut up asshole aleast he showed us
Socket size is 24