Это видео недоступно.
Сожалеем об этом.

Coupling Assembly-4WD (Borgwarner) Repair

Поделиться
HTML-код
  • Опубликовано: 30 окт 2023
  • Hyundai / Kia (2004 up)
    Coupling Assembly-4WD
    NOISE DIAGNOSE AND FIX
    47800-39000 (BorgWarner 51-02-027-001)
    Coupling Assembly 4WD makes the same noise as the rear differential.
    RUclips music:
    Finland - TrackTribe
    Fingerprint - Mini Vandals
    Come Get With Us - TrackTribe
    Bloody Tears - Quincas Moreira
    Sunset Trails - DJ Williams
    Emerald Seas - Aaron Kenny

Комментарии • 31

  • @dmitriy.shashkov
    @dmitriy.shashkov Месяц назад +1

    Спасибо! Очень помог 👍

  • @RusS350z
    @RusS350z Месяц назад +1

    Подробное видео. 👍

  • @limitlessbuilds
    @limitlessbuilds 3 месяца назад

    Did you clean each disc before installing them or just left them how they were when you pulled it apart?

    • @latexihire
      @latexihire  3 месяца назад

      Yes, I cleaned the discs before installing 👍

  • @rscottieb
    @rscottieb 3 месяца назад

    Where did you get the replacement bearing

    • @latexihire
      @latexihire  3 месяца назад

      The bearings are fairly basic sizes, you should prefer branded bearings, e.g. SKF Available in standard stores

  • @cubaalzain2219
    @cubaalzain2219 2 месяца назад

    hello sir
    i have kia sorento 2023 2.5 turbo
    i have problem of warning light in the dash of 4wd
    tell me there is torque error
    code number : P195800
    after drive in car several minutes and light shows up on dashboard
    what i must to do to earse that light permanently.
    thanks Kindly ❤

    • @latexihire
      @latexihire  2 месяца назад

      Hey, there is no information about that fault.

    • @cubaalzain2219
      @cubaalzain2219 2 месяца назад +1

      @@latexihire thanks anyway 🌹

  • @werx_tv6759
    @werx_tv6759 Месяц назад

    Good afternoon, tell me how you managed to remove the package of friction discs assembled with the shaft; I can’t do it? I don't want to spoil the seal, I just want to change the oil.

    • @latexihire
      @latexihire  Месяц назад

      The video from 5:35 to 6:25 should be clear...?

    • @werx_tv6759
      @werx_tv6759 Месяц назад

      ​@@latexihireYes, as you can see in your video at this time, everything is clearly visible, but for some reason my clutch is exactly like that. I drained the oil and started further disassembly, and I can’t get the whole thing like in your video, what do you recommend? I can send you a short video to the manager so you can see and give advice

    • @latexihire
      @latexihire  Месяц назад

      @@werx_tv6759 Hi, I had a problem at 3:30 in the video -> the cover was stuck, I put oil in between and knock knock, the O-ring is stuck without oil...

    • @werx_tv6759
      @werx_tv6759 Месяц назад

      ​@@latexihireI managed to get everything together like in your video, can I just wash it and fill it with fresh oil and put it all back together?

    • @latexihire
      @latexihire  Месяц назад

      @@werx_tv6759 Yes, all parts washed/clean, new oils in.

  • @selprocr
    @selprocr Месяц назад +1

    Good video..how often do you recomend to change ATF on that coupling ? Manuals of that car only recomends oil changing on the rear differential but never mentions oil changing on the coupling. How long will last that ATF oil ?

    • @latexihire
      @latexihire  Месяц назад

      The oil in the unit lasts well for many kilometers, the recommended oil change is 300,000 km, I used basic atf oil but a better option is Castrol transmax z.

    • @selprocr
      @selprocr Месяц назад

      ​@@latexihire thanks for your response. You removed coupling due bearing noise. But in my case I am having some issue. The 4wd warning light on dash is flashing and I can see some oil leak around rear differential. Also the car has no power when the throtle pedal is pressed. And got in scanner the code (4WD control code P1726)
      So I ask my self if the main problem is in the coupling....?

    • @latexihire
      @latexihire  Месяц назад

      @@selprocr Hi I don't think the 4wd coupler is causing it, but one of these -> wiring, connectors or control box. The car can be driven without the 4wd coupler, as I did when I repaired the 4wd coupler part.

    • @selprocr
      @selprocr Месяц назад

      @@latexihire when you say "control box" what do you mean ? I am surpriced to know about car can drive with the traction bar removed.. I tought that was not possible. At this time I have not dissasembled nothing yet, maybe next week. Can be got in the market the coupling discs as a repair kit ? ..just in case.

    • @latexihire
      @latexihire  Месяц назад

      @@selprocr I mean the motor controller 4wd circuit box. There is no information about the clutch plates, they apparently last well.