Brand New FLEX Miter Saw!! - Full Review
HTML-код
- Опубликовано: 26 июл 2024
- Episode #837 Today, we're doing a full review on the brand new FLEX double bevel miter saw! FLEX just keeps knocking it out of the park! This is by far the best miter saw I've ever used.
Router Bit Depth Gauge - makeawoodsign.com/products/ro...
Base Plates - makeawoodsign.com/collections...
Router Bits - makeawoodsign.com/collections...
Surface Bit - makeawoodsign.com/products/su...
Dewalt Router - amzn.to/3V6hM5C
Milwaukee Router - amzn.to/3RIb02O
Ferry Lights - amzn.to/3YJd92y
DeWalt Disc Sander - amzn.to/3e4aUVL
DeWalt Random Orbital Sander - amzn.to/3Cyo7PM
Spray Primer - amzn.to/3RGcXwT
Spray Clear Coat - amzn.to/3EgYS61
DeWalt Angle Grinder - amzn.to/3WZO4Qu
Kutzall Extreme Course Disc - amzn.to/3hOB9AT
Kutzall Medium Disc - amzn.to/3EDkl8m
Super Gloss Epoxy Resin - amzn.to/3AgPNXW
Dewalt Die Grinder - amzn.to/3SlnFuK
Kutzall Extreme Flame Burr - amzn.to/3kgdnPU
Foredom Rotory Tool - amzn.to/3XQYKQJ
Green Tape For Transfer - amzn.to/3ZqM7wP
Freezer Paper - amzn.to/3IE1R97
Tombow Adhesive Tape - amzn.to/47pdiMT
Mullet Tools Dust Collection - mullettools.com?aff=27
Use Code MAKEAWOODSIGN for 5% off
Email List - makeawoodsign.com/pages/subsc...
Starbond - bit.ly/3hcIhnq
Use Code Makeawoodsign at checkout to save up to 15% off on your purchase
Our website for Sign Carving Supplies: makeawoodsign.com/shop
We also have 2 online courses. We have a FREE Video Course. 7 Steps To Sign Carving Basics. Here’s the link ericrhoten.podia.com/
Plus, Ryan & I completed a paid course titled ericrhoten.podia.com/how-to-f...
Check these out and let me know if I can answer any questions for you.
If you don't know where to start, Here's our Small Beginners Sign Carving Kit
makeawoodsign.com/products/sm...
My favorite router bit makeawoodsign.com/products/pr...
My Dewalt DWP611 base plate makeawoodsign.com/products/ac...
Comments or Questions, my Email: eric@makeawoodsign.com
Vicki's Email: vickiwithdavesigns@gmail.com
Free router bit sharpening service now available. Learn all about it & all the Premium Membership Benefits.
ericrhoten.podia.com/membership
Here's a link to our Amazon Affiliate Store www.amazon.com/shop/makeawood...
“Get the Freshest CA glues on the market from Starbond. Here’s the link
bit.ly/3hcIhnq
Use Code Makeawoodsign at checkout to save up to 15% off on your purchase”
Instagram: MAKEAWOODSIGN
Facebook Page: makeawoodsig...
Links to the SCOTD albums on our F/B page:
SCOTD 4
pg/makeawood... 
Хобби
![Young Nudy - John Wayne (feat. Metro Boomin) [Official Video]](http://i.ytimg.com/vi/NY8HnYYo2fo/mqdefault.jpg)
I am a hobbyist and a DIYer. I need a miter saw for a few upcoming projects. I spent a good chunk of the last 48h reviewing Lithium battery operated miter saws. I concentrated my research on the more popular brands like Milwaukee, Bosch, Makita, Metabo, and DeWalt. I was pretty much set on the M18 Fuel 2734-21 Milwaukee 10" miter saw as a best compromise, until I saw this video, and a few other reviews of this same FX7141A-1J Flex 12" miter saw by other popular reviewers. I just placed an order on ACME Tools for this miter saw based in good part on your review. Thank you very much!!
Right on, man! It's definitely a great saw. I think you'll be happy with your purchase.👍👍
Looks like a nice saw and is well-built. Thanks for your video it's informative. God bless you 😊
Thanks buddy! Same to you👍👍
Great review. Flex is flexing their muscles!!
You got that right, Frank!
Great job EZ E....🤘🤘🤘
Thanks DanO!
👍👍👍.Thanks Guys
Any time, buddy!
Great review! Flex is definitely going to be a strong brand. Any idea on price?
Yeah they are! The bare tool will be $599 and the kit will be $799
That Flex is Flexy AF!!
😂😂
Nice saw. Wish I could afford it. Lol
😂😂
Would you personally and honestly recommend this saw for demanding finish carpenter?
I had a similar question too
Another guy asked this same question and I want to say yes, because of the ability to fine tune all the angles and bevels, but we don't do any finish carpentry work, so I can't honestly tell you that it'll fit your needs.
Just looking at it it's basically a slightly modernized knockoff of Hitachi's original SCM from the late 80's. The good thing about that is they are basically as accurate as your ability to tune them because almost every component is independent of each other. The bad thing is that the ergonomics suck and your not going to be able to set this up in a hallway, which is always ideal when working with extra long stock.
I have asked a couple RUclipsrs that have tested this saw and neither could give me an answer to this question. How is the deflection when sliding on a 45 bevel? I make and sell beam style mantels and have had issues with miter saws deflecting too much. I first had a Kobalt and it was terrible, it would be off at least 5-10 degrees on the furthest side. I have since switched over to a Metabo and it is much better. I personally love Flex and the majority of all my power tools are Flex, and with the release of the Brad Nailer, I don’t use any other cordless brand. Regardless of how well the deflection test performs, I wouldn’t replace it with my Metabo simply because of the slide location. The Metabo positioned the slide forward so you can have the saw almost against a wall. I am asking, because if I start doing more installs, I would set up a mobile work trailer and keep the Flex saw it.
Hi Tom, as far as I can tell it stayed solid. I did a test cut (1/2" ply) and it seems to have kept the 45 bevel through the entire cut. It also stayed fairly square (90 degree to the fence) all the way out to max cut. I didn't however put it under stress conditions. I don't know if this helps, hope so. Been using this saw for the last month and it's performing great so far.
@@oldave100 works for me, thank you!
When is it available to buy. Can’t find it at Lowes
They actually haven't given a a release date, yet. But it should be pretty quick.
I want your honest opinion this miter saw along with FLEX 10" table saw are these two tools good together for finished carpentry? If yes or no why?
I want to say yes, because of the ability to fine tune all the angles and bevels. However, we don't do hardly any finish carpentry work, so I can't honestly tell you that it'll fit your needs.
As if I don't have enough tools. Well, another miter saw wouldn't hurt right. I mean it's battery powered. 😂
HAHA you can always use another saw!
Howdy Mr. Eric Mr. Ryan....Not a bad review.
However, with my preference, I'd never buy it. The main reason, it's a battery operated "MAIN" tool for a shop. To me, that's a No Go. I believe Flex should reverse the selling point of that tool. The "plug in" should definitely come with it, no if's and's or but's and the battery should be the optional part.
The other factor that kills the deal is that this is a "shop tool", not a "throw in the back of the truck go to the job site" tool. A sliding miter saw is "meant" to be placed in a specific location in the shop, a bench built specifically for that miter saw along with outfeed left and right supports. Once that's done, the saw never moves from its "home". This being the case, it makes a moot point for it to be battery operated.
Because of those factors. This saw is a VERY Hard Pass with me. I'll stick with my Dewalt.
To each their own, but I spent 15 years doing construction and on every jobsite I've ever been on there's been multiple chop saws so I think you're a little off on that observation
it look like the same crap as dewalt miter saw, i to had a lot of saw as well. up to now the best one still makita 40v.......
To each their own HAHA
im Bangladeshi
Right on, man! It's always cool when someone across the world watches our videos!👍👍