Rear bars are functional, super helpful, but DAMN they just complete every car they go on don’t they!! It looks so good Patrick! Been waiting for this one 🙌🙌
In all seriousness get a 6 pin Deutsch plug and then have two tails of trailer wire coming out of one side. Same with the bar use Deutsch plugs so the bar is quick connect and waterproof electrically. Solder and tape/heatshrink is good but you've got to cut it if things need replacing.
Great job guys, though I would've put the grease seal and lower bearing in the housing first because if you look carefully the grease seals are now not sitting in properly there cockeyed !! Easy fix though. Seeya Rob.....................I've been a mechanic all my life and I'm 65yrs old.
Mate , the seals for the swing arm bearings are meant to be pressed into the bottom of the swing arm capturing the tapered roller bearing in the arm before you install them. Yours are just floating under the arms and will allow water and dirt to get in there.
Needs rear mud flaps. I use Kaymar rear bars on the 4WD's I have owned and if you have no rear mud flaps the rear bar gets mud into all the hard to get to places for cleaning. Also, when on rock/ stoney tracks they kick up and make short work of the paint on the rear bar.
I think you will find also that the bearings on the rear bar swing arms are the exactly the same as you front wheel bearings so in emergencies can be swapped
I was so happy when I got the cruiser company rear bar for my 105 it definitely completes the look but it also opens up so much possibly for lighting, 12v and touring functionality. Looks mint mate
Another superb episode and a topic of real interest to me. Well done boys. PS. Modding a 4WD is never complete. There are things that always needs to be change, improved, or upgraded, as new things always come up in the market. 😁
Another great vid 👍 Would reccomend some type of grip on the top part of the bar. One day you'll be in the mud and hop up to grab the trax, slip and destroy your shin(s). I've still got the shin dent 15yrs later.
Do yourself a favour and install a reversing camera on the righthand side of the left arm, as close to the centre of the car as possible. Supermarket car parks can be a bit of an adventure otherwise. If you do much towing, get a second camera pointing at the tow ball, with a change over switch. You'll thank me afterwards.
I love you Aussies, you get excited over a rear bumper like I don't get me wrong I like my front bumper too, sweet ride. I have a 93 Toyota 4 Runner on 35's and the 5.29 gears but my ride has no binby bouncer's up front.
Congrats Patrick! The 80 is looking mint and mean. Ready for a good trip away. Me personally, I hope to get stuck out there and never have to come home. Cheers mate 👍
I Love Your Videos and you inspired me to make 4wd content i will be posting my first video this weekend. And i think you need a snorkel, but the rear bar came up nicely.
Have to update my bar so bad, those MHM style bars are sick, i need quarter protection bad, you're going to love that bar man, even my cheapo one can slam into stuff
Nice work, looks a treat! Dunno if you’ve seen it or not but Tim bates put in a siphon system for his water jerrycan. Did one myself and it works really well. If your interested look him up or give me a yell, cost bugger all.
Just be careful with your GVM all that steel adds up I’ve got a GU with a 3t GVM, just a roof rack, winch & cradle, 35” tyres and alloy bar it’s up around 2850kg. Great content as always guys those rigs are looking great 👍🏻
The rear bar looks awesome. The cruiser is coming along amazingly. Definitely be able to get off grid for a fair amount of time with all the upgrades. Bet you can’t wait to do a really big trip.
the cruiser has had some nice upgrades lately, bumper is sweet. just needs 2 emu wings for convenience to access the rear Paddy. Liam, gotta ask mate wen does the patrol ute get some luvin as well. even Dan waved the magic wand over the patrol wagon. the thing is u 3 lads have show cased other companies/manufactories than the standard same ol. i say well done lads n keep up the gud work.
Emu wings will probably be the next "exciting thing" for the 80. Though The Cruiser Company also sell "Lift Up" windows for the 80. But IMO, they are not as well though-out as the Emu Wings. The CC Lift Up window while having a bigger opening, require some body drilling to fit, unlike the Emu Wings where it does not require any. The CC Wing, also uses a very DIY looking piano hinge, but I do like their flush fitting locks over the Emu Wings.
Mate, good video thanks! I have 80 VX and a question. So on the back boot lower flap I see you replaced the original carpet with black plastic cover. You made yourself or bought the add on? Cheers!
Awesome stuff and looks awesome .btw what number plate light did you use ? and btw the number plate bolts careful they dont rub into the Jerry can and water container could be a problem down the track 😃 ... but big thumbs up
Wow. So far 2 things. When manufacturing such expensive part, I don't understand why they don't make it so we don't have to cut into flares?? I am pretty sure it is possible. 2nd thing, when reading bearings, it's better to do it that you hold bearing other way around, wide side towards your palm with grease. Just try it and tou will see how much easier it is.
Hope you don’t mind me replying, I have the exact rear bar on my 105 and it added 51 kilos with 1 arm and spare tyre and the old spare mechanism removed.
You could I guess but what's the point, with a tyre carrier and Jerry carrier the back of the car is already slow enough to get into, I took my Jerry holder off because it was so annoying
In Saudi Arabia, we take advantage of the spare tire place below and install a 50-liter water tank made of stainless steel
Rear bars are functional, super helpful, but DAMN they just complete every car they go on don’t they!! It looks so good Patrick! Been waiting for this one 🙌🙌
Is your 4wd finally complete? yeah nah it goes on and on. By the way the rear bar looks the goods and compliments the 80 nicely.
Hahaha. My thoughts exactly. 🤣
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 💜 nude.snapgirls.today/barbie 💜 PRIVATE S*X
LET'S MAKE LOVE BABY 💜
#ライブ配信の再編ありがとうです!#この日のライブ配信は、#かならりやばかったですね!1#万人を超える人が見ていたもんね(笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした!#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです!#この日のライブ配信は、#1万人を超える人が見ていたも ん(#笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです!( #笑)#垃圾
In all seriousness get a 6 pin Deutsch plug and then have two tails of trailer wire coming out of one side. Same with the bar use Deutsch plugs so the bar is quick connect and waterproof electrically. Solder and tape/heatshrink is good but you've got to cut it if things need replacing.
Great job guys, though I would've put the grease seal and lower bearing in the housing first because if you look carefully the grease seals are now not sitting in properly there cockeyed !! Easy fix though. Seeya Rob.....................I've been a mechanic all my life and I'm 65yrs old.
That Haircut transition too Patty.... lockdown FREEDOM.
Mate , the seals for the swing arm bearings are meant to be pressed into the bottom of the swing arm capturing the tapered roller bearing in the arm before you install them. Yours are just floating under the arms and will allow water and dirt to get in there.
First thing I noticed
Needs rear mud flaps. I use Kaymar rear bars on the 4WD's I have owned and if you have no rear mud flaps the rear bar gets mud into all the hard to get to places for cleaning. Also, when on rock/ stoney tracks they kick up and make short work of the paint on the rear bar.
Yeah agreed, Pat put a little message up at 8:08 saying he's gonna get em
Agree and for legal reasons needs a rear flap to be roadworthy illegal to flick water/mud up to cars behind you
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 💜 nude.snapgirls.today/barbie 💜 PRIVATE S*X
LET'S MAKE LOVE BABY 💜
#ライブ配信の再編ありがとうです!#この日のライブ配信は、#かならりやばかったですね!1#万人を超える人が見ていたもんね(笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした!#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです!#この日のライブ配信は、#1万人を超える人が見ていたも ん(#笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです!( #笑)#垃圾
I got the same 80 to a tea mate. looks like a nice bar. Cheers for the content
Couldn't agree more guys, great video as always! Love how much of the work you do yourselves! Great bar
I think you will find also that the bearings on the rear bar swing arms are the exactly the same as you front wheel bearings so in emergencies can be swapped
That's handy to know cheers
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 💜 nude.snapgirls.today/barbie 💜 PRIVATE S*X
LET'S MAKE LOVE BABY 💜
#ライブ配信の再編ありがとうです!#この日のライブ配信は、#かならりやばかったですね!1#万人を超える人が見ていたもんね(笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした!#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです!#この日のライブ配信は、#1万人を超える人が見ていたも ん(#笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです!( #笑)#垃圾
I was so happy when I got the cruiser company rear bar for my 105 it definitely completes the look but it also opens up so much possibly for lighting, 12v and touring functionality. Looks mint mate
Thanks mate!! :)
Another superb episode and a topic of real interest to me. Well done boys. PS. Modding a 4WD is never complete. There are things that always needs to be change, improved, or upgraded, as new things always come up in the market. 😁
so true
I have a Cruiser Company rear bar and tyre carrier on my 105 and I love it. Glad to see you like yours too 👍👍
You know it's a real 4wd when there's dirt falling out while working on it
It is an awesome looking bar, with so many practical uses. But in the end It just looks tough.!!!. enjoy . Great vids guys
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 💜 nude.snapgirls.today/barbie 💜 PRIVATE S*X
LET'S MAKE LOVE BABY 💜
#ライブ配信の再編ありがとうです!#この日のライブ配信は、#かならりやばかったですね!1#万人を超える人が見ていたもんね(笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした!#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです!#この日のライブ配信は、#1万人を超える人が見ていたも ん(#笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです!( #笑)#垃圾
Another great vid 👍 Would reccomend some type of grip on the top part of the bar. One day you'll be in the mud and hop up to grab the trax, slip and destroy your shin(s). I've still got the shin dent 15yrs later.
Do yourself a favour and install a reversing camera on the righthand side of the left arm, as close to the centre of the car as possible. Supermarket car parks can be a bit of an adventure otherwise. If you do much towing, get a second camera pointing at the tow ball, with a change over switch. You'll thank me afterwards.
I love you Aussies, you get excited over a rear bumper like I don't get me wrong I like my front bumper too, sweet ride. I have a 93 Toyota 4 Runner on 35's and the 5.29 gears but my ride has no binby bouncer's up front.
Yeah spot to put the bin bag !!!! Best mod🙌🏽🙌🏽 and another awesome video!
This 80 is actually becoming such a rig. Looks awesome mate!
Love a land cruiser especially an 80 series 🥰❤ such a good episode
mint man cant wait to put mine on
Awsome video mate keep the content coming 👍🏻
Thanks Phillip!!
Next upgrade will be a snorkel for sure….
Looking good buddy 👍🏽
Also should add a sheet or aluminium hinged to the back of the jerry holder for added fold down space
Congrats Patrick! The 80 is looking mint and mean. Ready for a good trip away. Me personally, I hope to get stuck out there and never have to come home. Cheers mate 👍
Nice bar! Put some locktite on those two swingarm stopper bolts so the corrugations don't lose them
"IS MY 4WD FINALLY COMPLETE?" haha they're never complete
@Burn So so true 🤣🤣🤣
Cool
No other words
Just cool lol
Also after school I need to start working on my car
I Love Your Videos and you inspired me to make 4wd content i will be posting my first video this weekend. And i think you need a snorkel, but the rear bar came up nicely.
Excellent stuff, I definitely want one of those for my 80M8T
Have to update my bar so bad, those MHM style bars are sick, i need quarter protection bad, you're going to love that bar man, even my cheapo one can slam into stuff
That is a gorgeous rear bar!
Complete? No way, there will always be changes and mods to do. All your mods are excellent choices. Keep up the good work.
Love the look of the bar! Been thinking of calling them up and asking if they can make a custom for my FJ.
You boys did a good job of that bar 🤩🤩
Looks mint, also handy to able to carry a second spare if u need
Awesome content building mine slowly but will get there 😊
Nice work, looks a treat! Dunno if you’ve seen it or not but Tim bates put in a siphon system for his water jerrycan. Did one myself and it works really well. If your interested look him up or give me a yell, cost bugger all.
Looks mint now mate, great job brother
Looks fully sic mate. Great job guys.
Just be careful with your GVM all that steel adds up I’ve got a GU with a 3t GVM, just a roof rack, winch & cradle, 35” tyres and alloy bar it’s up around 2850kg.
Great content as always guys those rigs are looking great 👍🏻
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 💜 nude.snapgirls.today/barbie 💜 PRIVATE S*X
LET'S MAKE LOVE BABY 💜
#ライブ配信の再編ありがとうです!#この日のライブ配信は、#かならりやばかったですね!1#万人を超える人が見ていたもんね(笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした!#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです!#この日のライブ配信は、#1万人を超える人が見ていたも ん(#笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです!( #笑)#垃圾
80 look mint mate love it
Looks awesome mate might put one on my patrol
If you were to keep the spare tyre underneath, could you still access it with this rear bar on?
Do the bolts for number plate intrude on your plastic jerry cans when doing the tracks?
Sweet buddy 😀
When do we get to see James new camper trailer ?
The rear bar looks awesome. The cruiser is coming along amazingly. Definitely be able to get off grid for a fair amount of time with all the upgrades. Bet you can’t wait to do a really big trip.
Looking good 😊
This 80 is starting to become a dream build 😂
the cruiser has had some nice upgrades lately, bumper is sweet. just needs 2 emu wings for convenience to access the rear Paddy. Liam, gotta ask mate wen does the patrol ute get some luvin as well. even Dan waved the magic wand over the patrol wagon. the thing is u 3 lads have show cased other companies/manufactories than the standard same ol. i say well done lads n keep up the gud work.
Emu wings will probably be the next "exciting thing" for the 80. Though The Cruiser Company also sell "Lift Up" windows for the 80. But IMO, they are not as well though-out as the Emu Wings. The CC Lift Up window while having a bigger opening, require some body drilling to fit, unlike the Emu Wings where it does not require any. The CC Wing, also uses a very DIY looking piano hinge, but I do like their flush fitting locks over the Emu Wings.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 💜 nude.snapgirls.today/barbie 💜 PRIVATE S*X
LET'S MAKE LOVE BABY 💜
#ライブ配信の再編ありがとうです!#この日のライブ配信は、#かならりやばかったですね!1#万人を超える人が見ていたもんね(笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした!#今後は気を付けないとね5). .
!💖🖤❤#今後は気をライブ配信の再編ありがとうです!#この日のライブ配信は、#1万人を超える人が見ていたも ん(#笑)#やっぱり人参最高!#まさかのカメラ切り忘れでやら1かしたのもドキドキでした #今後は気をライブ配信の再編ありがとうです!( #笑)#垃圾
Do you know with this bar if you can still fit the OEM rear mud-flaps back on?
Mod the number plate ARVOS. Get rid of that old vic plate!😉
U guys are the BESTTTTT
Mate, good video thanks! I have 80 VX and a question. So on the back boot lower flap I see you replaced the original carpet with black plastic cover. You made yourself or bought the add on? Cheers!
Are the rear wheel arches still well attached to the body? Because you cut off the bottom mounting points...
How did you guys go about fitting the bearing caps? I’ve been struggling with mine
Love the early upload 👌🏼🤘
Put a emu wing on the driver side far back window?
Awesome stuff and looks awesome .btw what number plate light did you use ? and btw the number plate bolts careful they dont rub into the Jerry can and water container could be a problem down the track 😃 ... but big thumbs up
Brother can you add a link in the description, on where we can buy this rear bar.
that bar makes the 80 look so much better, are you planning on getting a snorkel?
How much does it weigh? Have you checked your gvm? Whats the big rig weighing in at? Great channel boys
good job
Any recommendations on mud flaps?
So your bin bag , is that for bouncing binbies off the rear tire?
Hey pat how’s the wiring side of it is it easy with the Indicators and the reverse lights ?
Have you smashed the tailpipe yet?
I see your 80 is missing a Bash plate to cover the steering damper, surely a bit of 3MM steel and rattle can red.
excelente... te quedo muy bueno
where do you live....the views are fricking amazing !!
How much was bar. Love the ease of installation
Thought you would have cleaned up the chassis and fresh paint before installing the the bar.
hey patrick do you have a dcdc charger in there?
Wow. So far 2 things. When manufacturing such expensive part, I don't understand why they don't make it so we don't have to cut into flares?? I am pretty sure it is possible.
2nd thing, when reading bearings, it's better to do it that you hold bearing other way around, wide side towards your palm with grease. Just try it and tou will see how much easier it is.
me to i love the mod
Changed the entire look mate
Epic vid, looks phat😮💨🤟🤟
Thanks Matt!
You still need a snorkel but besides that looking mint lads keep it up
Awesome vid, and when are we going to see James gq
Hi mate does this fit 105?
Patrick. How are the dual colour work lights holding?
Say rear bar once again!
yeah still great man! work a treat!!
How are the jerry cans fastened?
Love 80 series, yeah naa, 4wds never seen to be completed, my list still going 😂
Nice, how much does it weigh? Any suspension sag from the install?
Hope you don’t mind me replying, I have the exact rear bar on my 105 and it added 51 kilos with 1 arm and spare tyre and the old spare mechanism removed.
Nice, thank you.
Time for a razlar bull bar to match the look
If you haven't upgraded the brakes yet - you might want to with all this added weight.
What type of rear bumper bar is that
Can you paddlock the latches for added security into the back
You could I guess but what's the point, with a tyre carrier and Jerry carrier the back of the car is already slow enough to get into, I took my Jerry holder off because it was so annoying
Great work mate the back bar looks awesome
if we don’t see a staino snork soon
Couldn't wait to get rid of the swing away spare in my 80.
Sooooooo inconvenient 99.9% of the time
Gak ada 2 nya.vx 80 emang tajir
Time to get a snorkel and head to the tip I reckon.
What the name of the rear bumper bar
How much
From memory I still don’t think you have a snorkel do you lol
Snorkel next? The old 80 needs one.