I fixed mine with new cells. But it was also doing the same thing as yours, and stalling after a short while, but starting up again. I noticed that I was very low on inverter coolant and had thdt flushed and replaced, as the constant stalling seemed like a symptom of overheating.
Not true at all. The space on the sides of Camrys and Avalon's, not to mention all the shielding make this very difficult to do. You can pull that off on Prius but not these. Plus the temp sensors and what not on the bottom would be at more risk of damage.
@@wasian4 thank you sir. But I have question please I removed the bad one reading 6.45 and place one 7.77 and check all modules again all is fine . And reinstalled back to car and the check engine lights is gone and I drove my car three days and the check engine light is back again. Why? Thank you
Electrical Insulated Gloves amzn.to/4bAJGgU
Electrical Insulated Socket Set amzn.to/3VUDHO9
Hi dear, quick question please, is the temperature is important for cell ? Thanks
Link to removal part before this ?
How long does this system need to discharge the voltage
Years and years haha
What problem was you having with yours. Mine is stalling after only a few miles. But starts right back. Says check hybrid system
I fixed mine with new cells. But it was also doing the same thing as yours, and stalling after a short while, but starting up again. I noticed that I was very low on inverter coolant and had thdt flushed and replaced, as the constant stalling seemed like a symptom of overheating.
Can we just remove the batteries and drive it on gas only???
I was wondering the same thing or bypass it or something
Hi everyone , can someone help me to know if 7.5 are good or bad ? I have 2 , 7.2 and 1 7.3 .
But im not sure about 7.5
I have toyota prius 2010
Couldn’t hear you
You need patience to work on HYBRID . You are lucky it wall worked out. The power there is no joke
Sir , you don’t have to remove all cell to reach to the bad cell you have to remove the first one only to access the bad module 😊
It depends where the module is…
Not true at all. The space on the sides of Camrys and Avalon's, not to mention all the shielding make this very difficult to do. You can pull that off on Prius but not these. Plus the temp sensors and what not on the bottom would be at more risk of damage.
@@wasian4 thank you sir. But I have question please I removed the bad one reading 6.45 and place one 7.77 and check all modules again all is fine . And reinstalled back to car and the check engine lights is gone and I drove my car three days and the check engine light is back again. Why? Thank you
The audio sucks had it all the way up still could barely hear him wtf
amzn.to/4cg8n3v Replacement Bus Bars & Bolts