Can’t really hear the clicking noise on video , but I can tell you this, my Maverick Q flux has been amazing! I beat the snot out of it! I had a bit of crunching sound after running it in a bunch of gravel. Thought it might of been the diffs, but I ended up taking the support beam off to adjust my slipper and I found a bunch of Little Rock wedged in around the drive shaft and got them all out. Noise gone. Slipper was slightly out of adjustment. The thing has been one of my favorite rigs to run and jump. Sadly I finally cracked the body shell after hundreds of good and hard jumps! I love this thing as much as my Rival mt-10.
A bit hit and miss these Mav’s,shame as they look decent as well , the big rally version I’ve got has been great but the old XT truggy broke arms for fun . Nice to see a vid though mate 😊 Keep them coming 👍😎🏁
2:54 🤭 😅 car seems to be running great apart from clicking, wonder if its something to do with a wheel? car does look great and it does rip,and slides round corners great, what was that other rc ? 👍👍
@@rcplaytime Yeah it does slide nice , i had its Max 16 tooth pinion it boots pretty nice . Good guess with the wheel but No . I thought same. This before i put new gearbox housing, Nee Bearings , and New Diff Gears . When it crunched and i kicked it. Ive since put some extra shims in. I haven’t had time to run it yet. So fingers X. The other Rc Was its Brushed/Less convert MT. Odd it doesn’t have these problems. But the Tyres dig in more on this surface and its High centre of Gravity make it a Rolly polly . Or just my driving .
@@SoundStream101 It is rather a pain, without knowing the car it would be hard to explain what keeps happening. I have Had it apart so many times i had to buy new screw because the head on the original became Stripped. I found crunchy bearings so changed them & Not that. I built it to how it is supposed to be . As per Manual i checked and checked again. Its really Annoying. B
@@rcnitroflux2361 Its what really irritates me , they drive well, the plastics and body shell have improved immensely . But the drive components seem to be a mixed bag of Quality control, The monster truck i bought brushed had been ok for a few months but it began clicking on braking , And the other red / black xt i bought brushless. Has been an absolute turd Replaced Spur gear, Slipper shaft pads . Slipper shaft Bearings , bought 2 lots of Diff crown and Crown pinion. Chipped a tooth in the original amd the replacement , The crown pinion is screwed on to the input shaft, via 2.6mm screw that stripped like butter. Cant get a replacemnt only 2.5mm. Which keeps coming unwound ive used thread lock and Super glue. I replaced the diff case , The Case bearings , the Diff Bearings. The input shaft, And another new crown gear and crown pinion, I am too scared to find out. That repair cost me over £60.
Yep,I,ll support you on, that, bro, they are SHIT, listen to Mark 1 rc , I knows how much, Time, effort & £ has been put into making it right, from new in box, you shouldn't have to from new in the box,rc,,, ,rek rc, also agree,s they are shit too, some big boyz channels should be honest, but they won't, because then rc companies won't send them car,s, so can some big boyz channels start being honest about rc cars please
Can’t really hear the clicking noise on video , but I can tell you this, my Maverick Q flux has been amazing! I beat the snot out of it! I had a bit of crunching sound after running it in a bunch of gravel. Thought it might of been the diffs, but I ended up taking the support beam off to adjust my slipper and I found a bunch of Little Rock wedged in around the drive shaft and got them all out. Noise gone. Slipper was slightly out of adjustment. The thing has been one of my favorite rigs to run and jump. Sadly I finally cracked the body shell after hundreds of good and hard jumps! I love this thing as much as my Rival mt-10.
A bit hit and miss these Mav’s,shame as they look decent as well , the big rally version I’ve got has been great but the old XT truggy broke arms for fun .
Nice to see a vid though mate 😊 Keep them coming 👍😎🏁
Thanks for the honest review Mark, looks like I'll need to spend some more and get the MT10
Pity, great looking truggy.
@@TheflyingkiwiRC thanks mate it has good potential to be a decent little truck.
When it works ☺️
Mysterious. Do you see any wear in the gears?
Hope you can solve the problem with the RC car. It looks like a really nice car.
@@G9RCCar thanks mate i hope so too
@@mark-1rc502 no problem Bro
2:54 🤭 😅 car seems to be running great apart from clicking, wonder if its something to do with a wheel? car does look great and it does rip,and slides round corners great, what was that other rc ? 👍👍
@@rcplaytime
Yeah it does slide nice , i had its Max 16 tooth pinion it boots pretty nice . Good guess with the wheel but No . I thought same. This before i put new gearbox housing, Nee Bearings , and New Diff Gears . When it crunched and i kicked it.
Ive since put some extra shims in. I haven’t had time to run it yet. So fingers X.
The other Rc Was its Brushed/Less convert MT. Odd it doesn’t have these problems. But the Tyres dig in more on this surface and its High centre of Gravity make it a Rolly polly . Or just my driving .
I had hopes for this rc but it failed .... I know exactly how you feel .. i gave up on mine
That sounds like you got one of them diffs are in backwards. Or the input shafts ain't shimmed right properly 🤷🏼♂️ hope you figure it out
@@SoundStream101
It is rather a pain, without knowing the car it would be hard to explain what keeps happening.
I have Had it apart so many times i had to buy new screw because the head on the original became Stripped.
I found crunchy bearings so changed them & Not that. I built it to how it is supposed to be . As per Manual i checked and checked again. Its really Annoying.
B
Do they both have same issues bud run pretty good tho
@@rcnitroflux2361
Its what really irritates me , they drive well, the plastics and body shell have improved immensely .
But the drive components seem to be a mixed bag of Quality control, The monster truck i bought brushed had been ok for a few months but it began clicking on braking ,
And the other red / black xt i bought brushless. Has been an absolute turd
Replaced Spur gear, Slipper shaft pads .
Slipper shaft Bearings , bought 2 lots of Diff crown and Crown pinion. Chipped a tooth in the original amd the replacement ,
The crown pinion is screwed on to the input shaft, via 2.6mm screw that stripped like butter. Cant get a replacemnt only 2.5mm.
Which keeps coming unwound ive used thread lock and Super glue. I replaced the diff case , The Case bearings , the Diff Bearings. The input shaft, And another new crown gear and crown pinion,
I am too scared to find out.
That repair cost me over £60.
Yep,I,ll support you on, that, bro, they are SHIT, listen to Mark 1 rc , I knows how much, Time, effort & £ has been put into making it right, from new in box, you shouldn't have to from new in the box,rc,,, ,rek rc, also agree,s they are shit too, some big boyz channels should be honest, but they won't, because then rc companies won't send them car,s, so can some big boyz channels start being honest about rc cars please