If it wasn't for kind people like you, uploading great and clearly filmed videos like this, I'd never have learned how to sew in the first place.... THANK YOU so much for taking the time to help us all. ❤❤❤
Thank God for you. I took my machine apart to clean out the lint and oil it, and having zero tech skills I couldn't get it back together. Your video name and instructions were perfect. Thank you a million times over for posting. Kindest regards, Patricia
I couldn’t figure out how to reseat my bob in case in my machine so when I looked up how to do it I found your video and it was super helpful, thank you!
Oh my goodness thank you!!! I almost had a heart attack when I took mine out but realised that I couldn't put it back in!! Many thanks!! (I did all this with a lamb on my lap😂❤)
Me, too. I love my machine so much, mainly due to ease of loading bobbin, I'm not mechanical and was going to look up machine repair in my city but thought I'd ck RUclips first. Happy sewing, Patricia
Thank you very much for your help. I battled before after servicing the machine and now the same nightmare was happening. I decided to check on line and you came up first. Went in just as you explained. ❤
Thank you for your post. My bobbin thread was knotting and tangling up and as a new sewer, I didn't know why. I saw your post and decided to purchase a new bobbin case on Amazon and now it working fine. Still not sure why the bobbin thread was knotted and tangled but changing the case works. I have my machine now for just about a year. It is what it is, though. Thanks again.
THANK YOU SO MUCH. you saved my life. I got my first toploader machine and it needed oiled which was easy but then I couldn’t remember the way to put the case in. You’re the best
This video was kind of a life saver. I didn't know about the arrow and white dot. I have been trying to get this thing back in for two days now lol. Thanks
Thank you very much! You helped me understand the problem I had when the bobbin case (shuttle) was rotating freely in the metal base and then getting hit by needle. From you video I could clearly see that the bobbin case is being held in place by the metal stopper with a screw on top and the plastic knob on the bobbin case. There is very little contact area between the plastic knob and the metal stopper (bad design!) and the knob might have worn out a bit. So I have pushed metal stopper a bit further with a pair of pliers and off we go. Excellent video. Thanks a lot!
Mik Tara, I am having the same problem (the bobbin case spinning freely and the needle hitting the bobbin case, even after getting a new bobbin case!) I am not sure what you are explaining that you saw in the video and noticed on your machine that fixed the problem. Can you explain?
Thank you for this video! I had an E6 error with the thread and material jamming up in the base plate. I had to take the entire baseplate apart three times to finally find a 4x1 mm foam attachment that dislodge from the old bobbin casing. I noticed the new bobbin casings don’t have the foam attachments which makes sense as they can jam up your machine. I am happy to say my machine is working smoothly and it wasn’t a ball barring issue like so many other videos mentioned.
Thank you sooo much for this. I nearly had kittens when the bobbin unit came out on my machine as I was untangling caught up thread. I didn't even notice the white dot until watching your video. So kind of you for sharing this . ❤️ xx
thank you so much for this video.i m a beginner to sew.my machine is new and the bobbin was not turning.and after watching your video my bobbin is turning now.thank u so much
Thank you very much, I have the same exact one.i have been stressing over why my bobbin case is not staying in place,now I know it needs replacing.thank you.
Comment no. 2. Sorry. I don't mean to belabor the point, but I almost cried when my machine fit right back together and sews like a champ. Also, it cost about $5, I had to get a new clear plastic bobbin cover, from Amazon, in case anyone needs one. Thanks again. I subbed !!!!!!!
Thank you. Mine had jammed my machine and I did not know how to fix it lol I took the whole machine apsrt, greased the bearing and while turning the wheel I noticed the bobbin holder dancing in the hole. Lol
Thank you so much. I went to clean out my bobbin casing and couldn't remember how it went back in (and I've lost the sewing machine manual, of course). Without someone kind like you, I would not be able to finish my Christmas projects. By the way, do you have any tips on sewing leather? My leather is distorting when sewing.
Can u tell me about that how can i repair my brother machine problm actually fabric couldn’t move, fabric is not jammed but couldn’t move behind or frontly
The brush attached to my bobbin case came off while the machine was running. I managed to recover the brush, but I’m unsure whether I should reattach it or just replace the entire bobbin case.
Thanks so much. I had the bobbin case completely wrong. Now I'm having this problem where the bottom thread sometimes gets all tangled up. Does anyone know what to do? My tension is on 4 and I was using the zigzag stitch. I like to double stitch the elastic and that is usually when the problem occurs.
Thank you. But can you make one on how to thread it? Have an unused machine collecting dust bc no one on RUclips thinks it's important to make a video like that. They breeze right over it, like everyone should know how.
Hola tengo un problema estaba bordando y se enredo todo el hilo en la bobina y tuve que sacarlo todo lo volví a colocar y ahora suena muy raro cuando cose la máquina
namastay I'm from India same problem to my meani meachain also can I solve this 2 my machine? how can i buy etc bobbin. all advice not 2 buy even though I bought any mechanic not solving the problem eagerly waiting for ur valuable advice
If it wasn't for kind people like you, uploading great and clearly filmed videos like this, I'd never have learned how to sew in the first place.... THANK YOU so much for taking the time to help us all. ❤❤❤
Like seriously
Thank goodness for you, I accidentally took out the bobbin case and I couldn’t figure out how to put it back in!
Thank you so much for posting this. I cleaned and oiled my machine and couldn't work out how to replace this - you're video is so clear and helpful
Hi! Just wanted to thank you for this. I've been searching everywhere for a video like this and could not trouble shoot.
Thank God for you. I took my machine apart to clean out the lint and oil it, and having zero tech skills I couldn't get it back together. Your video name and instructions were perfect. Thank you a million times over for posting. Kindest regards, Patricia
I am very much a beginner when it comes to sewing. This video just helped me fix a problem I've been dealing with for a week! Thank you!!
It makes my day to know that this was helpful. Thank you for letting me know. Happy sewing!
What was the problem¥
Thank you, my machine got jammed and I had to take out the bobbin case!
I couldn’t figure out how to reseat my bob in case in my machine so when I looked up how to do it I found your video and it was super helpful, thank you!
Oh my goodness thank you!!! I almost had a heart attack when I took mine out but realised that I couldn't put it back in!! Many thanks!! (I did all this with a lamb on my lap😂❤)
Literally same just happend too me!!
@@ratatouille5521 lamb too?
Me, too. I love my machine so much, mainly due to ease of loading bobbin, I'm not mechanical and was going to look up machine repair in my city but thought I'd ck RUclips first. Happy sewing, Patricia
@@ratatouille5521 2
Haha same and after struggling I open RUclips 😂
Thank you very much for your help.
I battled before after servicing the machine and now the same nightmare was happening. I decided to check on line and you came up first.
Went in just as you explained. ❤
You just saved my life i love you endlessly. Couldn’t even google the problem for so long because i had know idea what i was dealing with.
Thank you for your post. My bobbin thread was knotting and tangling up and as a new sewer, I didn't know why. I saw your post and decided to purchase a new bobbin case on Amazon and now it working fine. Still not sure why the bobbin thread was knotted and tangled but changing the case works. I have my machine now for just about a year. It is what it is, though. Thanks again.
I found replacement bobbin cases for $4 on aliexpress. Just changed mine and the machine runs better than when I first bought it. Amazing
THANK YOU SO MUCH. you saved my life. I got my first toploader machine and it needed oiled which was easy but then I couldn’t remember the way to put the case in. You’re the best
This video was kind of a life saver. I didn't know about the arrow and white dot. I have been trying to get this thing back in for two days now lol. Thanks
I was trying to put my bobbin case for whole afternoon and when I saw ur video it was ao easy. Thanks a tons. 👍
Thank you very much! You helped me understand the problem I had when the bobbin case (shuttle) was rotating freely in the metal base and then getting hit by needle. From you video I could clearly see that the bobbin case is being held in place by the metal stopper with a screw on top and the plastic knob on the bobbin case. There is very little contact area between the plastic knob and the metal stopper (bad design!) and the knob might have worn out a bit. So I have pushed metal stopper a bit further with a pair of pliers and off we go.
Excellent video. Thanks a lot!
Mik Tara, I am having the same problem (the bobbin case spinning freely and the needle hitting the bobbin case, even after getting a new bobbin case!) I am not sure what you are explaining that you saw in the video and noticed on your machine that fixed the problem. Can you explain?
I have same problem. 🙁
Thank you for this video! I had an E6 error with the thread and material jamming up in the base plate. I had to take the entire baseplate apart three times to finally find a 4x1 mm foam attachment that dislodge from the old bobbin casing. I noticed the new bobbin casings don’t have the foam attachments which makes sense as they can jam up your machine. I am happy to say my machine is working smoothly and it wasn’t a ball barring issue like so many other videos mentioned.
Laura Im quaking my boots!!! Thank you for this blessed video xx
Thank you for this! Mine popped out when I was changing the bobbin thread and couldn’t remember how to put it back in
Thank you sooo much for this. I nearly had kittens when the bobbin unit came out on my machine as I was untangling caught up thread. I didn't even notice the white dot until watching your video.
So kind of you for sharing this . ❤️ xx
Thank you so much for this video!! I spent 10 minutes trying to figure it out before this video and I got it on the first try after.
thank you so much for this video.i m a beginner to sew.my machine is new and the bobbin was not turning.and after watching your video my bobbin is turning now.thank u so much
Thank you L. I have a hard time put it’s back in . Yours video was easy to understand.
Thank you so much for sharing this video!! I took mine out to get some fabric that got stuck and couldn't figure out how to get it back in properly.
Thank you very much, I have the same exact one.i have been stressing over why my bobbin case is not staying in place,now I know it needs replacing.thank you.
Thank you. I never would have noticed those little white marks for lining it up. That was my issue when trying to fit it in there!
Gahhhh tysm for mentioning the white triangle. SAVED ME SO MUCH TIME!!
My machine Brother CE 1100PRW. A little bit different but it’s working. Very helpful video, thank you so much
Mine is spinning out of place causing the needle to pierce the bobbin Suttle.
How can I stop this?
Yes. Thank you..great tutorial..I too was going crazy trying to put my bobbin case in..thank you thank you 🥰🙏
Comment no. 2. Sorry. I don't mean to belabor the point, but I almost cried when my machine fit right back together and sews like a champ. Also, it cost about $5, I had to get a new clear plastic bobbin cover, from Amazon, in case anyone needs one. Thanks again. I subbed !!!!!!!
I thought I broke my sewing machine omg thank you :) I was able to fix my machine
Thank you soo much!!! I was very lost till I watched your video 😊😊😊😊💕💕💕💕💕
Thank you so much for this video. It showed me I have it in the right way.
Thank you so much. I had a hard time figuring out out to put the bobbincase back. :)
Thanks I was finding how to put it back. Sudden headache. 👍
THANK YOU!!! you wouldn't believe my frustration!
Thank you for this. Very simple and amazing
Thank you for your tutorial. I was able to understand my bobbin issues; tension issues. Peace n Blessings
Thank you so much! You just saved me $45.00 😊
Thank you so much for posting this video helped us out tremendously
Thank you. Mine had jammed my machine and I did not know how to fix it lol I took the whole machine apsrt, greased the bearing and while turning the wheel I noticed the bobbin holder dancing in the hole. Lol
Just saved my marriage! Hahaha. This video helped so much!!! Thank you
😊 Thank you so much for sharing!!! It really helped me a lot!! Thank you 😊
Thanks a lot for guidance, it was really helpful
Thank you so much friend, I just ordered one hope it works
Merci beaucoup grave vous notre canard marche ❤ notre machine coudre sa marcher 😊🎉
Thank you so much i was have problem in inserting the bobbin case in its place and u solve my problem ..
Thank you so much. I went to clean out my bobbin casing and couldn't remember how it went back in (and I've lost the sewing machine manual, of course). Without someone kind like you, I would not be able to finish my Christmas projects. By the way, do you have any tips on sewing leather? My leather is distorting when sewing.
Thank you so much! My bobbin exploded and dislodged the holder, didnt see the marks
Thank you thank you for your fantastic demonstration that I Did It❤❤
Your video saved my life. Thanks a lot.
Last step, lock the bobin case? (Not sure, with the right bottom clip?)
Thank u very much for such a helpful video.
Thank you. A true lifesaver
Thank you! You saved my sanity!
Absolutely Perfect Video!!!
Thank you. You were such a big help!
Wow. Thank you so much. Would you be able to share the link to this product on Amazon? I can't seem to find this make. Thanks again!
Good explanation thank you so much ❤❤
Thank you .I fixed my bobin
Will trustee pre threaded bobbins fit my brother se650 embroidery machine?
Hi, what problem were you having?
perfect thank you for doing this!
Yay thank you so much! This was very helpful! 🥰🥰🥰🥰🥰
Thank you. Very helpful video!.
Awww...thank you sooooo much....this is my nightmare when I clean my sewing machine...
Thanks for the tips 😊
thank you so much!! I couldn't figure out how to get it back in lol
good pmim from philippines i need that but ii did not know where i buy that kind of bobbin case i hope you can helf me.
Thank u for the info n help
Can u tell me about that how can i repair my brother machine problm actually fabric couldn’t move, fabric is not jammed but couldn’t move behind or frontly
The cost of bobbin
Thank you for your knowledge...very helpful!
Thank you so much for taking the time to write :)
Thank you very much I almost broke mine
Great video! I’m trying to find it on amazon. What description did you use to find the bobbin case? I trod bobbin case but all I get are the bobbins
Thank you! You saved my life... Or at least my sanity. 😜
Yes, this machines have a way to test our patience.d Getting into jams sometimes gets us to discover and learn new things.
You are a life saver!!
The brush attached to my bobbin case came off while the machine was running. I managed to recover the brush, but I’m unsure whether I should reattach it or just replace the entire bobbin case.
Thank you very much.
Thanks so much. I had the bobbin case completely wrong. Now I'm having this problem where the bottom thread sometimes gets all tangled up. Does anyone know what to do? My tension is on 4 and I was using the zigzag stitch. I like to double stitch the elastic and that is usually when the problem occurs.
When I zig zag stitch I usually have my tention at 2 1/2 so maybe try change the tension around
Hope this helped 😁
Thank you very helpful
Thank you. But can you make one on how to thread it? Have an unused machine collecting dust bc no one on RUclips thinks it's important to make a video like that. They breeze right over it, like everyone should know how.
Thank you 😭😭😭😭😭😭😭
I will repay you by subscribing 😭🙏
It’s very helpful video
my brother sewing machine during transportation got some problem. it is not rotating only motor works but not rotating the needleside
Thank you so much!!
Thanks a lot 👍
Hola tengo un problema estaba bordando y se enredo todo el hilo en la bobina y tuve que sacarlo todo lo volví a colocar y ahora suena muy raro cuando cose la máquina
THAT FUZZY STRIP IN MY BOBBIN CASE CAME OFF. ITS STILL LIKE NEW, HOW TO GLUE BACK?
Thanks you
Thank you
namastay I'm from India same problem to my meani meachain also can I solve this 2 my machine? how can i buy etc bobbin. all advice not 2 buy even though I bought any mechanic not solving the problem eagerly waiting for ur valuable advice
Thanks excellent.
Thank you THANK YOU!!
Merçi beaucoup
gracias laurita
perrichy13 De nada :) gracias por escribir!
Can i have link for brother jx2517 model rotatory hook?
Tnq Soo much
ممكن شرح مفصل لتركيب القطعة الأتية في فيديو لو سمحت