Hi. A bobbin question I'm using tex 40 bobbin thread for my tex 80 topstitch thread on a twin needle machine. For the life of me the bobbin thread keep cutting off and won't continously lockstitch with topstitch thread. I'll get a few stitches in before the topstitch thread stop looping and I have to open up the machine constantly to pull the bobbin thread through the slots, groves and spring over and over to get the top thread to catch bobbin thread. Any advice?
Hi, Buy a doble needle machine, a sunstar km757. And since I bought it, the Hook on the outside bothers me a lot . I break the thread. What Will it be?. Thanks You very much for You reply
@@rosaangelicasuarez2841 hola. Compré una máquina dos agujas. Una sunstar 757 y desde q la compré el gancho de afuera me molesta, me rompe el hilo. Q será? Gracias por su respuesta.
10-4 on that. But please keep in mind - we are doing a demo video for our customers who may or may not have any experience in using this machine...not going for a threading speed test here but a thorough and slow demo showing the main threading points and procedures. Double tensions disks may seem redundant, but very useful when fine tuning stitch quality with thicker thread sizes. In any case, thanks for your input.
@@sunnysewing Given how important tension is for getting a good stitch on both sides of both stitches, I wouldn't call it redundant whatsoever. Then there's also the possibility of using different threads in each needle, whether that's by choice or by limitation of what you have on hand at the time.
@@Pharesm good points, also gives individual adjustment to each needles thread, so as you quite rightly point out one seam could be in tougher or thicker thread than the other stitch line, also you may be using only the Left or Right side needle for offset stitching a line ie using the other needle as a lineup for the other.
Can you adjust the height of the walking foot on this machine like you can on the THOR GC1541-S? And what is the thread size range you can use with this machine?
How much does this two stitching Christian cost. If you do not know Indian rupees in rupees, then tell us in the dollars as well as how much it will cost to send it from Varanasi to Uttar Pradesh, India.
Please may I know where this Sawing .machine is and the price of it? For I'm interested in buying one for my Sister.. Many thanks.. And Remain blessed Amen.....
i dont mean to be so off topic but does anyone know a trick to get back into an instagram account? I stupidly forgot my login password. I appreciate any tips you can give me
@Mark Raphael thanks for your reply. I found the site through google and im waiting for the hacking stuff atm. I see it takes quite some time so I will get back to you later with my results.
Hi. A bobbin question I'm using tex 40 bobbin thread for my tex 80 topstitch thread on a twin needle machine. For the life of me the bobbin thread keep cutting off and won't continously lockstitch with topstitch thread. I'll get a few stitches in before the topstitch thread stop looping and I have to open up the machine constantly to pull the bobbin thread through the slots, groves and spring over and over to get the top thread to catch bobbin thread. Any advice?
आप ने बहुत अच्छे से दिखाया है समझने के लिए
Ise fast toh mere sehar ka ganpaat tailor hai.🤦🏻♂️ machine mst hai 👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
8 minutes to thread the machine ? what the wonderful world !!
Intended to show how to do it
Die Spule ist hervorragend mit einem Magneten zu entfernen.
How do you adjust the bobbin tension? Or is it supposed to be really loose
Good job im from pakistan ❤❤❤❤❤❤❤❤❤👍👍👍👍👍👍💝💝💝💝💝💝💌💌🇩🇿🇩🇿
Me canse de solo ver a usted enhebrar esta maquina. Nooo ayyy...I'm exhausted of jyst watching you thread this machine. Too many steps. No wayy
I don't think you noticed the record was broken.
Muy bonitas. Máquinas y buenos travajos
Sir Good Morning.
Nice Machine
Buenas noches cuál es el costo de esta máquina y qué tan larga es su puntada
Hi, Buy a doble needle machine, a sunstar km757. And since I bought it, the Hook on the outside bothers me a lot . I break the thread. What Will it be?. Thanks You very much for You reply
"
En español
@@rosaangelicasuarez2841 hola. Compré una máquina dos agujas. Una sunstar 757 y desde q la compré el gancho de afuera me molesta, me rompe el hilo. Q será? Gracias por su respuesta.
Thank you sir
Very Good Iam Brazil ,Cravinhos sp
Dear,so beautiful machin its what is cost it & operation is also very
critical as I hope.
Exelente desde República Dominicana
what is called that material you sewing on?
What GPA do you need to operate this machine??
Walkingfoot center gage available?
Wow, that takes and incredible amount of time to thread. I can color change my Consew 339 in 1/4 that time. Double tension disks seem redundant.
10-4 on that. But please keep in mind - we are doing a demo video for our customers who may or may not have any experience in using this machine...not going for a threading speed test here but a thorough and slow demo showing the main threading points and procedures. Double tensions disks may seem redundant, but very useful when fine tuning stitch quality with thicker thread sizes. In any case, thanks for your input.
@@sunnysewing Given how important tension is for getting a good stitch on both sides of both stitches, I wouldn't call it redundant whatsoever. Then there's also the possibility of using different threads in each needle, whether that's by choice or by limitation of what you have on hand at the time.
@@Pharesm good points, also gives individual adjustment to each needles thread, so as you quite rightly point out one seam could be in tougher or thicker thread than the other stitch line, also you may be using only the Left or Right side needle for offset stitching a line ie using the other needle as a lineup for the other.
Please I need one and how much?
not everyone uses one 10 hours a day
É uma maquina para costura pesada, achei a distancia entre as agulhas muito larga, tem como regular essa distancia?Amei
Tem nao
Please where can I get the machine in Nigeria and how much is it??
how much is this machine ?
Sangat hebat
Bagus sekali
Extra cette machine bravo
Se puede usar solo con una aguja?
Super mašinka!!!
Que marca de máquina es la demostración
Hi iam surprised to by onde machine that can allow me swing a lether ,sofá staff wich model i can get or recommend me to get
Coll.me
Coll.me
Coll.me
Belleza
Learning things really
Can you adjust the height of the walking foot on this machine like you can on the THOR GC1541-S?
And what is the thread size range you can use with this machine?
Technical Spec's
WALKING FOOT HEIGHT ADJUSTMENT DIAL: Standard
THREAD: TEX 40 to TEX 210
Como los puedo conþactar ara las piesas de la maquinas industriales onde estan loa almasenes yo vivo Ecuador santo domingo de los tsachilas
Best machine Loki GC-1540
Es very good. ahy nide 1. ,how mach.
Nice
Can you make a similar video about Thor 1341 please?
How can parches
Wow amazing
This can sew split leather 10 to 13 mm ?
خيط بطبقة وحدة مو طبقتين راح اتلم الخيط ومتضبط ابد
اين يباع هذه الماكنة
Machine sawing juki 5550 okey terbaik sekali okey terbaik sekali okey terbaik 😢😮😮😅😅machine ini jahit tepi okey terbaik 😢😢😮😮😮😅😅😊😊😊😊😅😅😊😊
Onde e lugar de venda de máquinas
Price... ?
Hook setting, and belt timing setting, reverse feed lever setting videos upload please
Very interesting
How to buying
Where can I buy this???
Oi bom dia aonde posso incontra esa máquina de costura
Can its left foot automatically???
Me Gustaría escucharlo en español
@sunnysewing
How much this machine?
Phillipines price?
I want that machine, how can I get it
Qual e preço desta máquina?
Mașină cu două ace e ușor,lucrați in kavar sau iuberdec cu mustață
Hi sir mere machine me daga fashayahe to kya kru
What is the price for this machine
Quality giving and rate
How much does this two stitching Christian cost. If you do not know Indian rupees in rupees, then tell us in the dollars as well as how much it will cost to send it from Varanasi to Uttar Pradesh, India.
Eu quero saber ó valor dessa máquina
No se puede escuchsr en español?
I liké it so much
Hi is this a locking stitch machine?
Good question. I'd like to know?
How much this machine
Can you attach a swing-down roller guide to this machine?
Please tell me the price of this machine?
Please may I know where this Sawing .machine is and the price of it? For I'm interested in buying one for my Sister.. Many thanks.. And Remain blessed Amen.....
What will it cost to get it in Nigeria
Jack machine ka power Jyada hone se kya karna hai
Onde comprar e qual valor?
Cái này tình trạng xài rồi há, 220v?giá bao nhiêu?
وكيل المنتج في الاردن وكم سعر
How much the cost
Double needle timing and needle bar ajestment anupuga
👍🏻
CUANTO es VALOR D MaQUINA ?
جميل جداً
please , how many price
So good
Dear what is cost of this machine,as I an Indian.
Iska price kya hai
Nice machine how is the price?
Cuanto cuedta una oberlot para toda clase de tela grasias
How much double machine
Tha Best
Cual es el precio deesa máquina?
Fire🔥🔥🔥🔥
i dont mean to be so off topic but does anyone know a trick to get back into an instagram account?
I stupidly forgot my login password. I appreciate any tips you can give me
@Kenneth Vincenzo instablaster ;)
@Mark Raphael thanks for your reply. I found the site through google and im waiting for the hacking stuff atm.
I see it takes quite some time so I will get back to you later with my results.
@Mark Raphael it did the trick and I finally got access to my account again. I'm so happy!
Thank you so much you saved my account!
@Kenneth Vincenzo Happy to help xD
3:15
سعر الماكينه كام
Qual é o valor dela
Rate I want to buy 4 piece
Máquina de bodadado qual o preço
How much Price for this unique machine pls
I want to buy price pls
Bed sheet ka length kaha milega
I love this machine ....how can I fet it please
Elle coût combien cette machine ???
Which made by
Oi quanto custa uma máquina dessa ?
لا توجد عندنا هذه النوعية.
How many rupees
Утебя есть машинка тупикал.GC6240B
How much and do I get it?