How To Setting Timing Hook For Juki Twin Needle Lu-2860-7 || Technical Access.

How to setting timing hook for juki twin needle Lu-2860-7
About this video.
Needle-to-blade point of hook timing
1. Set the stitch dial to “0”.
2. Loosen clamping screw of the lower shaft set collar. Loosen two setscrews of the hook shaft
base on the top face of the bed. Adjust the clearance between blade point of the hook and the nee- dle to 0.05 to 0.1 mm by moving the hook shaft base to right or left to change its position. Then, tighten two setscrews of the hook shaft base.
3. Turn the handwheel counterclockwise to make the needle bar ascend by 2.3 mm from the lowest position of its stroke.
4. In the state described in align blade point of the hook with center of the needle and tighten clamping screw of the lower shaft set collar. At this time, a clearance of 1.5 mm is provided between blade point of the hook and top end of the needle eyelet.
5. Align the largest scale mark of the standard stitch dial with the marker dot on the machine arm. Check to be sure that blade point of the hook does not come in contact with the needle
(Caution) The operation panel could come in contact with the thread stand when tilting the ma- chine head. To protect the relevant parts from contact, shift the thread stand to a position at which the thread stand does not interfere with the control panel.
About this channel
Hello friend ,Welcome my channel techinical access i technician for sewing machine i related this job 8year i create this channel 21 june 2020,my channel motivation is easy to understand i made video only for sewing machine how to replace parts and fixing problem for juki high duty wrinkle machine overlock machine industrial sewing machine pattern stitching machine richpeac 2head machine Airbag machine durkopadler and juki machine trimmer machine Like Juki jack mitsubishi pfaff siruba sunstar durkopadler .
How to cleaning and polish hook for sewing machine
• How to cleaning and po...
How to setting cam moving knife for juki Lu-2810-7
• How To Setting Cam Mov...
How to remove error-08 for jack H5
• How To Remove Error E-...
How to fix coupling ac moto for juki
Lu-2810-7
• How To Fix Coupling Ac...
How to replace takeup spring for juki Lu-2860-6
• How To Setting Takeup ...
How to replace knife for jack-5559
• How To Setting Timing ...
How to replace and setting opener cam for juki Lu-2810-7
• How To Replace And Set...
How to fix timing movable knife for juki Lu-1510-7
• How To Fix Timing Mova...
How to fix timing hook for twin needle juki Lu-1560-6
• How to fix timing hook...
How to fix timing upper and lower looper for jack overlock 803D
• How To Fix Timing Uppe...
How to fix hook timing for jack shirley
• How To Fix Hook Timing...
How to remove error E302 for sc -922
• How To Remove Error E3...
How to fix and replace needle bar for juki Lu-1510-7
• How To Fix And Replace...
How to fix and replace hook for juki Lu-2810-7
• How To Fix And Replace...
How to fix hook timing and replace for juki Lu-1510-7
• How To Fix Hook Timing...
Disclaimer.
Copyright disclaimer under section 107 of the copyright act 1976,allowance is made for fair use for purpose such as criticism ,comment,news reporting ,scholarship ,and research.Fair use is a use permitted by copyright statute that might otherwise be infringing . Non-profit ,educational or personal use tips the balance in favour of fair use
Music.Took of kinemaster
Thanks for visit us plz subscribe tenchnical access and press bell icon for more related video.
#juki
#Lu-2860-7
#twinneedle
#Hook
#technical access

[@alibenmansour5908]

Please I need guid for my two needle machine to have good sewing

[@BDSewing24]

Good Video

[@xajejaabdulrahman5641]

Thanks for sharing this video

[@KfEntertainment2021]

Bahut axxa

[@MangalMedade-ky4bn]

Super bro

[@sarbjitkaur3820]

Esdi ly needle konsa use krte ho

[@saimsultan1409]

Bro double niddle k cutter ki setting btado

[@sarbjitkaur3820]

Bro Esme needle konsa lgate ho

[@freedragonfly]

What is the bias/webbing underneath for? Im curious.

[@mcdonald408]

Interfacing material for certain seams.

[@patricklester6456]

What is the attachment at the bottom feeding the interface material?

[@saimsultan1409]

Computerized jo hoti h