My vehicle didn't come with a factory back-up camera. However, I have read in the comments of other videos that the factory back up camera can be used with this radio. Unfortunately, I do not know what that entails. Sorry.
how did you secure the camera to the trunk door with that interior wall in the way? i don’t see how you would be able to slip on the nut onto the camera thread
Good question. I made sure the hole I drilled was just large enough for the threads on the camera to grab. I then "screwed" in the camera and applied a bead of sealant where the camera butted against the trunk.
I'm in Alaska, but I apologize that I only work on family vehicles. You can do it though man, just visualize and have faith in yourself. The drilling is the most difficult thing for some to imagine. Just drill small holes and gradually get bigger. You can always drill a hole larger, but you can't make it smaller.
Thank you. Just what I needed to make the job easier.
Just the video i was looking for before i install my backup camera! 👍🏻
If you have any issue with the connection up by the radio or with the software settings, there's another video on my channel that may help.
What wire did you connect it to when you got it to the front? And how
That's touched on in my other video - "wiring, closer look" at timestamp 21:34
ruclips.net/video/vjJeJl06_H4/видео.htmlsi=nb_gk0-SVxhHtSC8
Where do you go to change the setting to PAL?
@@brianshimohata7047 that's in my other video at about the 31:50 timestamp ruclips.net/video/bJKTv2tyNGI/видео.htmlsi=-9of9DI7zkTznGyW
Hey thank you so much for the video how do you select ntsc instead of PAL?
Hey brother, that's in my software video at about the 31:50 timestamp. ruclips.net/video/bJKTv2tyNGI/видео.htmlsi=ZR-yHenfxAV6SYXi
is there no way for the stock camera to be used?
My vehicle didn't come with a factory back-up camera. However, I have read in the comments of other videos that the factory back up camera can be used with this radio. Unfortunately, I do not know what that entails. Sorry.
how did you secure the camera to the trunk door with that interior wall in the way? i don’t see how you would be able to slip on the nut onto the camera thread
Good question. I made sure the hole I drilled was just large enough for the threads on the camera to grab. I then "screwed" in the camera and applied a bead of sealant where the camera butted against the trunk.
If you happen to drill the hole too large, the camera has a double sided tape seal. Use that and you would just press it into place.
Where are you based at? Could you just help me do this? I can pay you dawg🤧
I'm in Alaska, but I apologize that I only work on family vehicles. You can do it though man, just visualize and have faith in yourself. The drilling is the most difficult thing for some to imagine. Just drill small holes and gradually get bigger. You can always drill a hole larger, but you can't make it smaller.