How to pressure wash a house start to finish
HTML-код
- Опубликовано: 5 окт 2024
- Check out our training page to grow your pressure wash business quickly! Use the promotional code below to save 25% on select courses
BILLY25
In this RUclips video I teach you how to pressure wash a house start to finish and with a step-by-step easy to follow process.
I have made millions of dollars pressure washing homes over the last 25 years and I can easily teach you how to do the same thing in your area without expensive marketing cost.
Pressure washing a house has a few technical steps and processes that you will need to follow but can be easily done without expensive equipment.
With a combination of soaps and setting hypochlorite this can be done with rather smaller equipment.
Some people here on RUclips don't even own a legitimate pressure wash business but yet claim to know it all and sell you things that you don't need. I am here to train you in a straightforward manner and have the success and track record to prove what I'm teaching.
Each one of my conversations and I have with you are in our Video Training will be straight forward behind the scenes look with nothing held back! Again, we hope to be your source in the future for all things pressure washing and Parking Lot Striping !
Check out our training page to grow your pressure wash business quickly! Use the promotional code below to save 25% on select courses
BILLY25
One of the best House washing videos I have seen! I have been soft washing for 4 years and love it. Watched hundreds of videos over the years. This one was amazing.
I appreciate you
That was an excellent video Billy. Even seasoned pressure washers could pick up a tip or 2. I can definitely feel the difference in pressure when the S/H comes out if wand. On mine it's like a small burst just for a split second, and also the same thing when when the soap finishes for the rince.
The way you break down pressure washing is priceless Bill👍🏿👑😎
Thank you!
Just starting out and this is the best stucco washing video I’ve seen so far.
Thank you if you need any help finding niche market I'll put a link here below
www.billydavidsonvip.com/PowerWash
Very good info Billy. Love the content. I just added some services into my business this season and you gave me and continue to give me great insight. I'll be getting some of your courses a try as well. Thanks Billy!
We are here to help you whenever you are ready
Thanks for all the great info you share. Very helpful to the newer guys like me! 🙏👍
Amazing video man!! Very informative and will help alot for starting my pressure washing buisness.... God Bless
Excellent video Billy. Thank you for making it.
Awesome video! Very informative!
Really good video! Really informative. I enjoy every video you post you drop so many Nuggets. Keep them coming!
I can feel the soap coming in and the fresh water.
Can you do a video on what electrical you will see on a residential/maybe commercial site, and what to do about it
Great job Billie! How much a house like that cost to wash?
Another great video Billy! And no I can not yet feel the difference yet between SH and H20.
Good stuff Bro! You just saved alot of people From insurance claims!!
Thank you! We love purple power! If you ever need to get in touch with me my phone number is 985-345-0778
How is everyone's season going
Awesome video Billy!!👏👏👍👍
Love the vid. I’ve done around 30 jobs so far. One including a 14,000 sqft Walmart with a 2.3GPM 3300PSI pressure washing. I really need a better equipment set up. I’m using a diaper cannon that shoots out 0.5% which means I have to scrub every inch of the Walmart/houses. I have a bigger Walmart coming up and would love a new setup before then. I have about 3500CAD to work with. Please help. I have a truck I can put them set up in.
Great video. Very detailed.
You can definitely feel the difference when it changes back to fresh water.
Billy, thanks for the video. Do you typically wash houses or commercial buildings (apartments) with a 1% SH mix and if you do take it higher how high would you take it to 3? I have an apartment complex coming up. Mostly brick with some stucco. I been researching and see to use 3% on stucco. Thanks.
Very informative video thank you.
Great video! Can you put a link where you got the scrub brush?
www.lowes.com/pd/Ettore-Poly-Fiber-Soft-General-Wash-Brush/3592112
Thanks!
I like how you say soiled. LOL
What is the piece of equipment you use to reach 2/3 story siding??
Xjet or jrod
Hi Billy, thanks for your videos they are informative. When you speak about lowering the pump pressure do you mean at the unloader or the rev throttle?
We do it from the throttle
@@billydavidsonvip excellent, thank you so much for clearing that up. I'm on the fence, just not sure yet when to make the jump but your videos have cleared up alot of things for me.
how long after applying SH do you rinse it off with regular water?
Usually about 15 minutes
Any idea how to wash stucco or brick I have a 8 gal a minute would I need a xjet?
Depending on the severity of the dirt, mildew, you may be able to downstream it.
Not getting any downstreaming with 150 ft of 3/8 hose. works great with 100 ft. tried several tips up to a 60 tip and several different guns. I have a 5.5 gpm pump. any things to try.
You can use an open
Ball valve to downstream with anything over 100 feet of pressure hose. Also you can move your downstream injector up the hose closer to the gun, this works really good but you'll have to use a bucket to draw your solution out of. One mistake you can make is dumping your bucket over
I batch mix with a drop stick I can feel it when my helper switches from sh to water
Exactly. So many guys have told me they cannot feel it when the water starts to flow out.
Thanks Billy. Quick question, when you were rinsing you were using the JRod. How did you stop the downstream injector from pulling SH?
We usually just have to run back to the truck and pull out our siphon tube. I know there are some remote systems out there as well and I'm anxious to try it soon
Yeah Man!!
You mentioned at the beginning of the video that sometimes the 90 in the gun will prevent SH from coming out. I am having that problem, when I have a normal soap nozzle on I don’t have an issue, when I put a nozzle for 2 stories on, no SH. Thoughts on how to fix this? I have the correct nozzle sizes for my jrod.
Yes you're creating too much back pressure for the downstream injector to work. You could try idling down your machine to have power and that should start the draw through the siphon tube. The two-story nozzles constrict the water flow to projected up higher but often times it causes the downstream injector not to work correctly
@@billydavidsonvip thank you very much for the advice. New to the game, gonna check out your courses when I get a few bucks in the bank. Thanks again!
@@billydavidsonvip sorry to bother again… so I idled down to a little less than half, I have removed the gun and hooked the lance to a quick connect into a ball valve, same outcome. Works on the regular soap tip I have in the jrod, but won’t work for the high pressure 2 story nozzle. Any other thoughts? I really appreciate the help!
@@rickycarter6433
The only other possibilities that I can think of is that the two-story soap nozzle orifice is too small possibly designed for a lower gallon per minute machine causing too much back pressure or either the Downstream injector is faulty
@@billydavidsonvip that’s what I’m thinking, I have a 4gpm washer and the size is 00100. It was part of the jrod I bought on Amazon for a 4gpm unit. I will check it out. Thanks again for your help! Keep up the videos they are great!!
Where can I get those long hose sleeve at the end of the hose? Does that come with the hose? I found that on suttner page can’t find that for sale. Is that extra protection in case the hose burst 💥?
Yes it comes attached to the hose when we purchase yet, but that's an awesome question maybe someone can help us out by reading these comments. I would love to be able to buy a dozen of them just to have it on the truck. They definitely help with the hose not bending at the weak point
@@billydavidsonvip wha hose brand is that? Thanks
Why is the application bottom to top?
If you start at the top the cleaning solution can drip down in small droplets and start to evaporate really quick within the matter of seconds. The H2O will evaporate out of the small droplets and caused the concentration of cleaning solution to increase rapidly. Therefore in this situation as described you can etch paint or even possibly remove sections of paint where the droplets evaporated. Starting at the bottom ensures that any droplets will always drip on a common wet edge
Billy what percent my 4gpm Honda put out sh if I put straight sh in a bucket
I would recommend doing a bucket test but most likely about a 1 to 12 ratio so if you're using 12% bleach you should get about 1% out the nozzle on a 150 foot hose
Lol 2 yrs late to this video but PLEASE tell me that you no longer downstream stucco, a 1%, 2%, even 3% is NOT strong enuf to thoroughly clean stucco.
Where can I get sh?
Where are you located
It only took me 2 jobs before I noticed the difference between sh and fresh water.
It's almost a different rumble that I can feel through my wand
@@billydavidsonvip yes sir 👍🏻