Having the same problem a few other folks are having im following this video to a T but I can’t get the fader to adjust properly even when the faders supposed to be completely off I can hear the track faintly going. I feel the cut does not even work please help just purchased and new to hobby. Also purchased your tone arm thanks
It’s easy if you haven’t figured it out. Use a screwdriver, take off the plate, unscrew the crossfader, pull out the wire loom, plug it in on the other side, just make sure you rotate it before you screw it back down.
Does the vinyl audio from the STX filter out the lower frequencies? I wanted to sample 7” & 45s with my STX but noticed that the low end is missing from the line out, headphones, and the external speaker as compared to my other standard turntables or the Bluetooth connection using the same songs.
Is there a trick to make this work? When I run this procedure exactly, I still can’t tighten up the cut in on my fader in the right hand position? Does this only work if I’ve moved the fader to the left?
Dealing with the same exact problem it’s like I no matter what I can’t get it to work. The cut line is in the middle and I still her faint audio even when the fade is completely turned off
![[TF2] The Russian Bear Trap](http://i.ytimg.com/vi/YFNSwz2_rOA/mqdefault.jpg)
I thought I would have to get used to the maximum setting with too much cut in 🙌🙌🙌🔥🤣 Thanks for this Video ❤️
Selling those tonearms soon?
This was fire..!!! I want to have one soon..!!thanks jesse dean for updating.. keep skratching....!!! 🙏🏼🔥🎧 #skratchlife 🇵🇭🇨🇦
Ordered your Stanton digital fader from Open Format then found this video. Oh well gonna have 2 faders in my STX 😅
Awsome more STX vids please 👊🏽💪🏽
Having the same problem a few other folks are having im following this video to a T but I can’t get the fader to adjust properly even when the faders supposed to be completely off I can hear the track faintly going. I feel the cut does not even work please help just purchased and new to hobby. Also purchased your tone arm thanks
It doesnt work, I cant adjust it like that, the best I can do is set the cut in to fully sharp, any ideas?
It’s doesn’t work. I Turning all that handle. But still don’t listen sound. I make this procedure already 10 times. Totally same as on video.
Thanks bro for your info. Hey Jessie is that table belt or motor driven
lol!
can you play 12" on it?
No, it’s not possible.
No
Thanks!
Thank you
Hey Jesse i'm struggling to see how you disconnect the fader from the right port and install it in the left port any help please?
Me too?
It’s easy if you haven’t figured it out.
Use a screwdriver, take off the plate, unscrew the crossfader, pull out the wire loom, plug it in on the other side, just make sure you rotate it before you screw it back down.
@@CameronWaldon thanks man it turned out to be pretty straight forward in the end. I just was nervous with my big shovel hands.
Does the vinyl audio from the STX filter out the lower frequencies? I wanted to sample 7” & 45s with my STX but noticed that the low end is missing from the line out, headphones, and the external speaker as compared to my other standard turntables or the Bluetooth connection using the same songs.
Is there a trick to make this work? When I run this procedure exactly, I still can’t tighten up the cut in on my fader in the right hand position? Does this only work if I’ve moved the fader to the left?
Dealing with the same exact problem it’s like I no matter what I can’t get it to work. The cut line is in the middle and I still her faint audio even when the fade is completely turned off
Hi Sir, will be okay to provide tutorial on how to relocate fader? Much Appreciated!!
Are the tonearms for the STX available?
Run it back
Ahhhh
Need this bruh. Sent you an email