How to Align | Aim | Adjust LED Headlights | Dual High/Low Beam Bulb?
HTML-код
- Опубликовано: 13 мар 2019
- How to align | aim | adjust LED headlights bulb dual high/low beam pattern H4/HB2/9003, H13/9008, 9007/HB5, 9004/HB1 lights for cars, trucks & motorcycles correctly? This video shows aiming, aligning, adjusting properly dual beam headlights (H4 HB2, H13 9008, 9004, 9007) step by step, so that you get the maximum lighting, yet you wont blind other drivers. Using the headlight adjustment screws and a wall you I give you the correct beam distances that apply to almost every make and model with dual beam 2-sided aftermarket led headlight bulbs. #ledheadlights #headlight #adjustment #alignment
Thanks for watching and if you like our videos, please give us a thumbs up, and subscribe to see more installation videos! New Videos every Thursday. 
Авто/Мото
This video shows you how to properly align dual beam headlights (high beam share the same bulb with low beam headlight) so that you get the maximum lighting, yet you wont blind other drivers. Thanks for watching and if you like our videos, please give us a thumbs up, and subscribe to see more installation videos! New Videos every Thursday.
Alla Lighting Automotive LED Bulbs thank you!
Can you do a close up video of this with more details? I cant see anything. It's like You're only pointing, not actually doing it
You all prolly dont care but does anyone know of a trick to log back into an instagram account??
I was stupid lost the password. I love any assistance you can offer me
@Santiago Chris instablaster :)
@Kaden Marco Thanks so much for your reply. I got to the site thru google and im trying it out atm.
Looks like it's gonna take a while so I will get back to you later with my results.
Helped me alot, especially the first 00:20 seconds talking about which led sits back further. thanks!!
Thanks for your watching and feedback, we are glad that it is helpful for you.
Exactly. Just a few minutes ago a guy, jeep talk, gave me his Led headlights he was going to put in he's wife's Renegade. He said he had trouble clocking them. Think, by watching this video the key is to rotate the ring 180. Glad to find this video right off so can't wait to see if these LED bulbs are better than the silver star.
Thanks for teaching the proper positioning of the low and high beam during installation.
Thanks for your watching and feedback, we are glad that you love the headlights installation video.
Thank You! Exactly what I needed to get mine working properly!
Thanks for this video. It just fixed a major headache I've been trying to sort out.
That is amazing, we are glad that is helpful for you. and thanks for your watching and happy Thanksgiving Day.
Thanks for the video. Oracle instruction are so vague on proper adjustments. This made it easier to figure out the proper way to align mine.
Good Video! Thanks! I didn’t know that and now I Do!
THANK YOU! This is exactly what I was looking for! Fixed my problem!
Thanks for your watching and feedback, we are glad that it is helpful for you.
You are a legend! 🙏
Easy on the background music sheesh
Thanks very much for your feedback.
Agreed. It was nauseating music and overpowered your instruction.
I got a little scared
@@julian_trillo💀
bunch of whiners
Thank you. You was very helpful.
Thanks for your watching and feedback, we are glad that it is helpful for you.
Unfortunately newer models don't use this pattern anymore but at least some do mark top and bottom
Thank you!
i tried it on new led bulb... and it worked... before the car in front of me is blinded because of the highbeam in normal switch... but now its already on the right position... thanks for sharing your DIY
That is great, we are glad it is helpful for you, thanks for your watching too.
Thanks for sharing .
It is our pleasure.
Awesome thanks 👍
It really works..
This is the knowledge
Exactly what I needed now off to fix mine
That is great, we are glad that helps you
@@AllaLighting I got a 2016 Honda Accord with projector for the low beams. I install a new pair of lasfit h11 and my passenger side shines bright and project’s most the road no problem but the driver side not so good small patch . Could it be a bad bulb or I still didn’t set the bulb at correct angle like the passenger side
@@tracyf9233 Thanks for your feedback, due to it is from a different brand, we don't know the feature of the product, so sorry we are unable to answer your question correctly, if the bulb can't adjust the beam pattern, then it should be the bulb's issue.
Awesome informative video bro 😊
Very helpful video, but why is my led with thick build idk how to say it in english but i bought the slim one it works better than the circle one,im sorry for bad english
What about on vehicles that use separate bulbs?
What if both sides have single LED strip just bigger one. I installed as facing 12 and 6 oclock and looks like high beam makes bare difference from low beam, so ima rotate and see if 3 and 9 oclock makes difference
How did it go? Did it look better at 3 and 9
I think all two sided Led for L/H beam headlight are positioned 3&9 bot reflector and projector.. for foglamps 2sided led 12&6 position
I love you.
Thank you
It was helpful
It is our pleasure.
Hopefully this helps in my f250. My high beams hit the ground when I turn them on. My headlights are aimed as far down as possible and people still think my brights are on and I can’t stand people who drive with their high beams on with no consideration for others. I don’t want to be mistaken as that kind of person. Thanks for the information.
Thanks for your information, if your truck's high beam share the same bulb with low beam, this probably happens the LED bulbs directioin installed incorrect, it will require the correct position to be installed. If you need our further assistance, please email us service@allalighting.com by providing your vehicle's Make, Year, Model, LED bulb's link (in case you buy somewhere), we will see whether we can help you out of it.
Some LED are just too bright, period. I appreciate your concern about blinding oncoming traffic, however, your lights may be too bright to prevent otherwise. As I think is the case.
@@rickofns We have different brightness of LED headlights bulbs, if you need our assistance to find the best one for your vehicle, please contact us directly by email service@allalighting.com or phone 909-606-2935, thanks in advance.
How do you adjust it on an H7 1:1 light?
Now it make sense why it seems like my high and low change position💀
Let's do the hula dance🕺🏾💃🏽
Is that simple cool thanks
Hi im using projector light, now i change to led bulb, then my led not getting brighter, so i need to push my led down so led getting brighter, it is just need to leveling my lamp or adjust the pusiton my led?
what if both the yellow chips are all equal and 1 beside each other... i have 2 set for my acura.. Aukee h11.. and aukee 9005(Drl and high beam)
Some version LED headlights bulbs are not adjustable, so we are not sure the one you bought are adjustable or not, sorry for not being able to answer the question, it is recommended to contact the seller to confirm it.
Groovin’ tunes anchor this informative vid. Thanks for teaching and entertaining. You rock!
Thanks for your watching and feedback, we are glad that it is helpful for you.
What if I have a single low beam (2 sided LED bulb) in a projector headlight. I noticed when i installed mine last night, there is a dark spot/line in the center of the projector when light is turned on.. Is it still 3 & 9 o'clock for projectors?
It is the same orientation for both reflector and projector housing, you should see a vertical dark line on projector lens if installed correctly.
How do u keep the bulb from wiggling? My clips wont get around the big end where the fan is? Just rig it around with electrical tape
If your talking about the middle part of the led add the fan it’s most of the time removable , adjust accordingly
Hello, question.
Is it normal that my left low beam light is lower than my right lowbeam light? My friend said that its okey because it will not cause glare on the approaching traffic.
I'm from Philippines and we drive on the right side of the road.
Thank you
Normally they should be the same position, yet if it has not much big difference, probably works, but it is better to adjust at the same position for better performance and not cause glaring
Hello Sir,
In our vehicle there are both reflector (low beam) and projector (high beam) for projector i have installed HID buld and for reflectors led bulb, so how we align the led.
Should I roll a spliff for this project? (The music lol)
I was waiting for the adjusting and aiming.. never came.
So the most forward led goes on top? Little confusing video btw
No, the LED chips side facing left and right. Sorry for the confusion.
Thanks I put my wrong I will fix it now
I can't seem to rotate mine, there's some kind of set screw
So if i want to adjust beam pattern i have to keep inserting bulb in check it take it out losen the screw rotate where i think it needs to go tighten the screw put the bulb back in and recheck ? ( my bulb has set screw) wow thats alot of work and specialy having to work on the car at night so i can keep checking the output sux 🤦♂️
sometimes it is interesting as well 😀
@@AllaLighting oh you got jokes lol 😂 not fun for me
Hi for a Subaru impreza limited 2013 Headlights High beam and low beam which would be the indicated
Here is the bulb size guide for your vehicle and shows related recommended bulbs for your vehicle: allalighting.com/pages/2012-2014-subaru-impreza-headlights-fog-signal-tail-interior-lights
Do i need to do this in projector headlight..What is the right direction for 9005 led bulb In projector headlight ??
Up and down or left and right ? Or its the same result???
The led chips should face left and right, NOT up and down.
Anyone know why my
Low beams are bright but my high beams just seem kinda dim although they seem to shine farther. Have this on my car and truck, the high beam seems like it’s aimed normal just a little higher than low
Mine too, the high beam seems like it's useless , any suggestions??
Did you figure it out ?
Hello - my LED Head lights Have a slight issue the full beam is the deep and the deep one is the full beams... will this fix the issue?? Like everything works etc but this light aiming issue is bothering me...
Due to different light bulb have different adjustment, please take pictures of the led headlights bulbs you have and email us service@allalighting.com: the issue details plus the pictures for further assistance, thanks in advance.
After this video, I feel like I dropped about half my intelligence..
If i buy X-HL Vision 9008 H13 LED Bulbs Headlights, will they work DRL also or only lowa and high beam?
i have nissan nv200 (2015).
it is important for me to have DRL, i bought a set from sealight but they work only for low and high beam. so i want to make sure before buying the stuff from you guys. Thanks
Thanks for your message, would you please advise the working power of the DRL for your vehicle? and we will see whether we have compatible kits. Thanks in advance.
@@AllaLighting I believe it is 6V in each side.
Background noise made me feel like I'm getting a tour guide on the islands
Sooo…if my high and low beam are operating in the opposite way, i should twist them 180 degrees?
Yes
Thanks for your question, we are sorry that we missed your message, in fact, it depends, but you can try to twist them 180 degrees to see whether it is helpful, but mostly it is not like this way. If you still can't find solutions, please specify the issue detail, vehicle's information and LED bulbs type purchased and email us service@allalighting.com for further assistance.
I cant get mine perfectly vertical but low beam forward and high beam back I can do
it happen to me when low beam mode, the light turn the high beam. But when I switch on the high beam, it become low beam instead.
@@MyspanaMJ Probably the installation incorrect, please contact us by email service@allalighting.com by provide order number (if you don't purchase from us, please provide the product link), vehicle's make, year and model and issue details for further assistance.
Omg...I can't seem to find a video that clearly shows the correct direction that the headlights should face...so...which direction should the flat part be? Facing side to side (out...?) Or facing up and down? I have separate bulbs for the high beams.
If they are separate high and low bulbs they should be flat to the sides like a wall
@@rdizzleoriginal ok thank you! THAT makes sense!
What if I am unable to get the high beam strip in the bottom position, only the opposite is possible, there’s no way to adjust it any different
It depends on your bulb type, some bulbs are unable to adjust, if you need further assistance, please provide bulb type, vehicle's information and issue details and email us service@allalighting.com for further support. thanks in advance.
I’m confused. The high beam and low beam on my car are two completely separate bulbs
Yes, for many vehicles, the high bean and low beam are separate bulbs, for check what bulbs fit your vehicle, please click allalighting.com/pages/bulb-finder-shop-by-vehicle-led-light-bulb-car-truck , and you will find the related bulb size and products.
I think the part you call a chunk is really called a Chuck??
The "chunk"? Is that the technical name?
sorry, it is chuck
Dude, whats with the mariachi band music, it sucks in case you werent aware
Is it best to use your high beams while following a car so he knows youre there and doesnt stop suddenely?
No, usually it is low beam turn on, high beam should be used at night, whenever you're unable to see enough of the road ahead to drive safely, like Low visibility in urban areas, interstate highways, never use in foggy, rainy or snowy days.
I hope you are joking.
No wonder I feel like nothing happens when I change to high
It may be wrong I'll check
Any updates?
Good informational video but horrible music.
I used to do this but not anymore, there are already 360 deg LED bulb out there where it mimics the light distribution of Halogen, just use 360 led bulb, better intensity and light output plus no dark spots like 2 sided LED
Who makes those?
@@apa7611 there are several companies who did 360 degree LED bulb, like Audew 360 deg LED bulb/headlights, you can google it
@@rio20d
I am. The ones I installed last night not the 360 ones suck! The beam pattern looks like Shit! Going back too my original lights.
Thank you
@@apa7611 you can adjust the beam pattern with 2 side usually its 9 to 3 clock direction ( side by side) but that's the problem with 2 sided LED bulb, with 360 deg bulb you dont really have that problem because its omni direction ( light distribution all around)
@@rio20d
I wish I hear about those 360 ones before, oh well. i will just return the ones I just bought and get the 360 ones.
I installed them 2 sided ones 3-9 they’re bright but the beam looks like shit!
Thank you I really appreciate it
So where’s the kick pattern ?
Led tipe a produck
Another video that doesn't explain the LED kits with the shields on the side, I need to know if they should be installed facing up or down.
Sorry for the confusion, it should face left and right, not up or down.
The shields should be facing up with the led's on both sides at the 3 and 9 o'clock position.
@@dereckgregan5491 is this for just reflector housing or can this be for a projector too?
@@cirealreviews1776 reflector housing.
@@dereckgregan5491 how is it for projector? I installed a pair of LED bulbs in my projector and there is a dark line that runs right in the middle of the projector when you turn the light on.
Chunk? An industry inside word I guess for plastic ringy thingy that does not fit the LED bulb.
It would sure be nice if these Chinese import things came with SOME kind of instruction sheet and fit that for which it was intended, even though supposedly for this model and year truck.
I have my 2003 Ram 1500 dismantled, fuse box out, to access the rear of the lights. I just came inside, after having been eaten alive by no-see-ums, to view further instruction videos as it is also dark outside.
I guess I need to buy a lit garage and gloves before I attempt what should be one of the simplest replacement corrective maintenance jobs around.
Oh to have my '72 Beetle back...Please!!!
I look on the bright side though. Car designers do not design aircraft.
Sorry, it is chuck
@@AllaLighting
Oh, I was not correcting! Thanks anyway for the update. I was fine with "chunk"..... not knowing any different!
I was wondering why these Chinese made pieces of ****, never fit properly, malfunction, or never deliver what they advertise they do!
Have a good one!
Rotate that chunk lmao
Why is one light shown to be shining lower than the other one?
This is dual beam headlight bulb, the upper LED chips line for low beam, and lower LED chip line for high beam.
@@AllaLighting I think they mean why is the left side headlight a little lower than the right headlight.
I'm sure this is set that way to avoid blinding oncoming traffic. As seen with the hid housings, the level cut-off usually has the left side beam cut-off a little lower than the right side to avoid blinding oncoming driver (US roads), but with these halogen housings, you have to aim the beam a little lower on the left headlight for this same purpose.
Would have been better to show before and after of wrong and right so we would know what to look for
Great idea, we will improve soon, thanks very much for your great suggestion
It's "CHUCK" not "CHUNK" by the way. Otherwise, very helpful video.
Thanks very much for your comment and we will revise it in the future.
180° gets you back to original place. You mean 90° you are welcome
Regardless of it being a single or dual led light what is the correct orientation of the led? Should the LEDs be at 12 and 6 or 9 and 3 o'clock?
Did you ever find out? Because I need to know, too!
@@evandoucet1449 I didnt get a answer but from what I've seen on other videos it looks like 9 and 3
@@texascrossbowdude636 thank you!
@@texascrossbowdude636 how do you determine which is 12 and 6 on it? No numbers on mine
@@wAtCHiNUNOw2dAyy by picturing a clock in your mind along with the orientation of the leds
How do I align my leds with projector headlamps??? I can’t tell if they are correct or not
good,,,but the music,,,,,,,,,,,,,wowwwwwwwwwwwwwwwwwww
TOKKALO MUSIC APANDIRA BABU. ..
Good information but the background music needs to be removed. That's just so annoying when your trying to listen to what your saying.
You're.
MUSIC NOT NEEDED!! TAKE IT OFF!! THANK YOU.
Sorry to blow a comment but those led chips aren’t aligned correctly LOOK OF THE CHANGES ON THE POITIONS OF THE CHIPS RIGHT WHEN THE VIDEO STARTS AMD FLIPS IT ////both Led chips should be place identical on both sides SS these are opposite
The music is sooo annoying you are teaching!
Aspect ratio ??
I can't see what your even filming 😂
Great informational video, terrible music, Way too loud for a teaching video can't hardly hear what you're saying
Leave the music away . It's terrible.
Music is too loud. I had to stop watching
Dont put it on these headlights. Its dangerous for other.
Get rid of that music.😡
No mon
get rid of the horrible music
The music is so annoying
You do realize, headlights can be adjusted without taking out the bulbs?
Teach us sempai