For what it’s worth, (7 years after the video)? Your video showed more & gave better visual information than all the bullsh*t from other car vortex RUclips babblers. Seeing is believing. I can absolutely see that applying outside vortex generators further down your window would change the airflow in a positive manner. It would just require more “testing”. Great visual video! Thank you.👍🏻👍🏻
the vortex generators attached the flow at the middle of the back glass, but the side ends are still turbelent. have you tried putting additional ones on the extreme edges of the roof to solve the turbelence at the side ends ?
I saw that too. Julian Edgars aero videos say that the center V.G.'s Should be inline with car but sometimes having the outer ones slightly angled outward improves results. Perhaps adding some angle to the outers would improve laminar flow.
palopaluca I chose the shape due to the evidence that they actually work. I based the spacing off their recommendations on their website, I believe it's 1" spacing.
For what it’s worth, (7 years after the video)? Your video showed more & gave better visual information than all the bullsh*t from other car vortex RUclips babblers. Seeing is believing. I can absolutely see that applying outside vortex generators further down your window would change the airflow in a positive manner. It would just require more “testing”. Great visual video! Thank you.👍🏻👍🏻
Excellent visualization. Thanks for sharing.
It looks like a spaghetti dance party.
Will also help keep rear screen clean👍
the vortex generators attached the flow at the middle of the back glass, but the side ends are still turbelent. have you tried putting additional ones on the extreme edges of the roof to solve the turbelence at the side ends ?
I saw that too. Julian Edgars aero videos say that the center V.G.'s Should be inline with car but sometimes having the outer ones slightly angled outward improves results. Perhaps adding some angle to the outers would improve laminar flow.
I think the vortex generator shows it delays gear change in this video.
I've been wanting to do this also! Any noticeable increase in down force from the wing?
At high speeds you’ll know bro 😏
Obviously effective
is there Any improvement in MPG?
I'm not sure improved MPG is what he was after given the rate of acceleration demonstrated in the video :D
You must be very proud of the message at the bottom of the screen. 🐓
The question is how many do I install and what's the best shape?
palopaluca I chose the shape due to the evidence that they actually work. I based the spacing off their recommendations on their website, I believe it's 1" spacing.
If i pull a trailer. Should these be removed and stuck into the trailer?
just put them inside your trailer and shut the door.
LMAO Czerofucksgiven
nice sound.
now it makes sense, thanks
were they placed at same or different angle ?
DK L same across the back portion of the roof, maybe 2-3" offset from the rear windshield
LSX_M3 great! Thanks for the info. I an glad they actually work on regular cars.
работают)
I think it looks better in back of the car rear bumper the roof look nasty
That’s not the purpose of them brain waste.
The purpose is not to look good, if you install aero parts to look good then you're a ricer I'm afraid
@@Fred_the_1996 that thing don’t make your car faster to much shark fin on roof come on
Does it create lift force?
I believe so.