I've bought so many straws and pens and can't get any of them to fit each other, I did see someone on Tik Tok use balloon sticks but the ones I bought aren't narrow enough, the hunt goes on. These are lovely
I purchased my pen silicone molds with refills and caps from Amazon. The refills 5.5 inches, but the tip is so much smaller than the straw. What do you suggest?
Hi lovely idea!! Can u please share the link for the refill that you've used..i am not getting the refills that'll match the mould size..i am getting short one's
@njarmin8586 Aapko check karna padega whether beads fit honge refill daalne ke baad Beads aap pehle bhi daal sakto ho par mujhe doubt he ki shaayad refill fir karna mushkil hoga
@Tracy Jones Place the straw against the mold and cut it to length if it's long. Then place it inside the mold and make sure everything fits before pouring the resin. This straw was very thin so I was able to cut it
@omayrarivera1823 Are you asking about the Petri effect? It's made using alcohol inks.. dropping white ink on the coloured ink I have a few videos on it
SO smart!!!!! So simple yet so effective… I’m off to find straws NOW!! Thank YOU so much for this!!!!!!!!
I've bought so many straws and pens and can't get any of them to fit each other, I did see someone on Tik Tok use balloon sticks but the ones I bought aren't narrow enough, the hunt goes on. These are lovely
Good idea of stray for reusable pen.Was searching a lot for this.Thanks for sharing👍
This is beautiful
Very good idea.( re usable pen ).pen looks beautiful.
Was searching for this like vedio and got this first time
Thank you for sharing step by step in a well effective way ❤
You can use a coffee stir straw. I asked a local coffee shop if I could have some and they gave me a box.
Got to try that. Thank you so much 😊
def going to a local one to ask for some. can find those .4-centimeter straws to save my life.
I'm going to try the coffee straw because my straws (although the holes are small) are too big and don't conform to the tip of the pen refill.
Dove hai trovato il tappo-cappuccio della penna...complimenti per la penna, molto bella ed ingegnosa!!!
Wow 🤩 love the alcohol ink ones!
You are a genius 😮❤
Hallo wo bekomm ich die halme her ? Danke im vorraus 🎉
Hey thank you so much your so creative
Thank you for your kind words
Awesome tutorial.. ty
Beautiful can you do a video on the petri
Yes, will make one soon
Well done. Very smart idea 👍
Thank you! 😊
I purchased my pen silicone molds with refills and caps from Amazon. The refills 5.5 inches, but the tip is so much smaller than the straw. What do you suggest?
Hi lovely idea!! Can u please share the link for the refill that you've used..i am not getting the refills that'll match the mould size..i am getting short one's
@vinita picha maxwriter
Very helpfull❤🎉🎉🎉
Truly nice!
U can grab 2 straws and mix n match no lines
can you do this with just this style pen or can it be done with other designs x
There are pen molds with different designs available
Where did you buy the caps?
Wow super
Refillable pen mai beads se name likh sakte hain?
@njarmin8586 Aapko check karna padega whether beads fit honge refill daalne ke baad
Beads aap pehle bhi daal sakto ho par mujhe doubt he ki shaayad refill fir karna mushkil hoga
You use paper straw?
Where do you buy the nib covers?
How much this pen
What is the diameter of the straw? I think I missed it. Also, what brand? Thank you in advance.
Thanks alot dear
Mra resin k pen harsh q nai bnta
hi.. can we put d refill without d plastic straw?
Yes you can
Pls can I know why the pen is not strong, it's too soft after I made it
I think the resin has not cured fully. Wait for a few days to see if it hardens
Thanks
I think u must have used hardner in a less quantity plz mix a right ratio
Plz link me the mould I want buy
amzn.to/3PRSNCx
Where did u get the mold ?
amzn.to/3rgpYWB
Do you put the name on the side that is up in the mold? And add resin? New here. Thank you
@Carmen Aviles For this pen..yes i put it on the side that was up since the design is same on both sides
Hi are you able to cut the straw in case it's too long
@Tracy Jones Place the straw against the mold and cut it to length if it's long. Then place it inside the mold and make sure everything fits before pouring the resin.
This straw was very thin so I was able to cut it
How did you make the 3d effect?
@omayrarivera1823 Are you asking about the Petri effect? It's made using alcohol inks.. dropping white ink on the coloured ink
I have a few videos on it
Oh ok thanks. I’ll look for the video.
What pen refill do you use? Any specific kind of link to the ones you use?
I bought a few and one of the refills turned out to fit the best.
Pls mention the best fit refill link
@@gladies61 yes please mention. The refills I get from Amazon, do not write well.
Hi there! Do you have a link for the refill pens?
Hey I got it from my local stationary shop. Had to search for the correct one. The one I used is a brand called maxwriter.
Can we use paper straw?
@humnaqamar4102 paper straw will not work because the resin will go through
Absolutely brilliant
Penusable resin pen what ingredients use
The liquid i used is resin
Kindly tell mtlb toot jata
Which resin are u using?? Pls tell
@languagebuddy2967 Esuoxsy
Any refil used mam or specific pen use ?
@priyadharshini m maxwriter
What did you use for the name?
Vinyl stickers
@@CraftsWithKripa
Do you sell the vinyl? Is there a specific brand?
@@prshus2000 no I don’t sell it. You can get it through resin art suppliers or anyone who works with a cricut maker
Did you seal pen once you added name?
❤❤❤❤❤
Please tell the measurements
Pls say hindi