CNC ROUTER, HOW TO, spindle tramming using a granite surface plate + DTI and skimming the bed flat
HTML-код
- Опубликовано: 22 июл 2022
- Video 706 CNC ROUTER, HOW TO, spindle tramming and skimming the bed flat Part 2. A Roger Clyde Webb easy learning CNC build tutorial
Thank you for watching
Help support my channel and become a Patron
www.patreon.com/user?u=15079773
The Australian Inventors Workshop™ 2022
Sponsored By
Thunder Laser Global
My CARVECO code 5% discount code is
ROGERWEBB5798
(ONLY AT THIS ADDRESS BELOW)
store-us.carveco.com/?ref=B40...
Everything @ Banggood DE 2.5% discount
(ONLY AT THIS ADDRESS BELOW)
aklam.io/9Dh0ux
My Fusion 360 20% discount
(ONLY AT THIS ADDRESS BELOW)
AMAX 3636, MIDI 4040, MAXI 1212, AMAX, CNC Router, Sieg X2 CNC Mill & Sieg 4 x 20 CNC Lathe + Mach 3.5 Info
Plans and parts listing available on my Patron pages
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 16! Disclaimer: These videos, commentary, and or advice are intended for entertainment and inspiration for adults over 16 -year-old. Woodworking and metalworking are dangerous. Always seek professional advice and training before using any power tools or CNC machines. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.
I would have measure each point of the granit slab with the gage fixed relative to the spindle. To be sure that the slab plane was the same as the xy plane of the machine x and y axis. Shim the granit in consequence , then proceed to traming. You did do it on camera but spoke about it in the beginning.
Peter over at CNC Nutz sets his depth of cut at 0 for his bed flattening program. He then zeroes the cutter on the bed and then adds the depth of cut to his zero in Mach 3. That way you can adjust the depth of cut on the fly to get just what you want without changing the program. I tried it and it worked pretty well.
greetings dear Roger. always rich information, watching the video here with my wife, she congratulates you and asks how you manage not to affect your objects on the shelves with dust, since you machine a lot of mdf too.
Tell her that he has his wife dust his shop every day - that'll get a reaction :)
I'm new to the CNC world, as expected I have two questions 1, I own a iGage dial indicator but trying to figure out how to mount it. Did you make your mount or is bought? 2, trying to decide on the software ither Carveco Maker or Vcarve Pro, any suggestions. Thanks Jon
Hi Roger . How about using a quarts bed as bed ? Bolt that down and have 25mm baltic birch on top with screw inserts ?
You need a longer "arm" to square/tram the spindle properly.
Its good for me
@@rogerwebb9600 Maybe I'm too perfectionist...
No, no, no. Mr. Roger. you're making the spindle square to the granite slab. But the granite slab could be not parallel to the plane XY created by the mivement on the X and Y machine rails.
Please check my method I posted in your previous video.
I dont think so, Its good!
Hi great video got alot from it however its part 2? carnt find part 1.
Hi,
ruclips.net/video/7-LAArH_8oY/видео.html
Hello Mr Roger. Please let me know as I am new to cnc the speed of when you did the surfacing of the bed please. Would greatly help me a lot. Ikr it's an old video but it's very help full. FYi I use a 1/16 skim bit on my diy cnc 1155x1795 bed
Ok, 50mm per sec and 22mm step over with 1mm cut, but that is with a 2.2kw spindle and a 50mm cutter @ 18,000 RPM
@@rogerwebb9600 I have a 400w spindel