I'm new to the fiber and this has helped me a lot. I really didn't understand about how to choose the proper lens until this video. Great job...Thanks!!
i am new to laser, i have a 50w and i am looking for more perforation,thanks to you i know that i need a smaller lens,i admire your work,they are wonderful.greetings from colombia
@@JS-Tactical-Designs - Great video!!! Can you tell me where to get more lenses for my 30W laser? Any information would be greatly appreciated! Thank you!
thank you so much for the explanation sir I want a 50W fiber laser for tumbler with powder coated so do you think a 175mm lens is ok? again thank you so much
really help me out. I just wondering if i can know how to get protective layer for lens? is it as a set with lens, or can be buy separately ? please help me
I've read that fiber lasers aren't good for plastics, but have seen gun grip patterns being lasered. What materials outside of metals can a fiber laser cut or engrave?
Mainly metals. Some plastic works great, some doesn’t. Depends if it has glass in it and what your trying to do to it. Glass filled plastic doesn’t laser very well. I have done plastics, metals, and graphite
@@JS-Tactical-Designs Thanks. I'm looking to get a fiber laser and a Co2 laser. But it good to know that I can get a bit more than l expected from the fiber.
![Oscar Maydon x Fuerza Regida - Tu Boda [Official Video]](http://i.ytimg.com/vi/_ymicn0_GYc/mqdefault.jpg)
I'm new to the fiber and this has helped me a lot. I really didn't understand about how to choose the proper lens until this video. Great job...Thanks!!
Glad it was helpful!
i am new to laser, i have a 50w and i am looking for more perforation,thanks to you i know that i need a smaller lens,i admire your work,they are wonderful.greetings from colombia
very informative video for newbies to Fiber Lasering like me...am buying an Omtech 30W very soon...Thank you and great 2022!!
I just got a 30w a few months ago and this had helped a lot. Thank you so much!
Glad it helped!
Great information!! Your upcoming videos and training will be my goto. Will the training course be here or through another source?
Training will be available through teachable.
Great video!! I have a 30W fiber laser, where do you get the lenses for it?
FocusLaser in Aliexpress, high quality lenses
Good information. Thanks
Thanks for the information, this is in accordance with what I discussed with some friends.
Hi, great video. Where do you get your replacement lens protection windows from?
Could not get any real depth out of the 300x300 that came with my 50w raycus. Got a 150x150 lens on the way, hope it gives the depth I need.
That will help a lot.
Should have put labels in front of those lenses.
With specs
Good idea!
How do we figure out how much working area a lens can give us? Like a 300x300 lens will give us 10" or a 150x150 will give us 3" work area?
Great video looking forward to the next
thanks!
For engraving of 18”x18” field how much laser power and which size of lense will be required guide me please
The biggest marking field for a galvo fiber laser is 12x12 inches. I would reccomend a 50w
so can you put glass in front of the lens to protect it... I thought you said it had a protective lens...Where did you get it?
Thanks
The lens has glass in front of it for protection.
175 mm lens. Can ,,ingrave. Carbon steel , 1 mm ?
What laser do you have? How does yours perform on polymer80
50w JPT, I cannot do P80 frames because it is glass filled.
thanks I will be getting a smaller lens for sure to have more punching power.
Right on! it will defiantly help.
Thank you
Will the cloudray lens work on a monport fiber laser?
Thank you for these videos.
Your welcome! Let me know what videos you would like to see in the future.
@@JS-Tactical-Designs How about what the different settings on your laser do etc.. Higher frequency , hertz etc
@@JS-Tactical-Designs Hi could you possibly do Fiber laser eye protection goggles and protective screens would be great thanks
From Iraq 😍
@@JS-Tactical-Designs - Great video!!! Can you tell me where to get more lenses for my 30W laser? Any information would be greatly appreciated! Thank you!
thank you!!!
what's the formula to figure out the work area of a lens ?
thank you so much for the explanation sir
I want a 50W fiber laser for tumbler with powder coated so do you think a 175mm lens is ok? again thank you so much
You should set up a file and burn it with each of the different lenses.
Thanks, can you tell us more about your laser?
really help me out.
I just wondering if i can know how to get protective layer for lens?
is it as a set with lens, or can be buy separately ?
please help me
I've read that fiber lasers aren't good for plastics, but have seen gun grip patterns being lasered. What materials outside of metals can a fiber laser cut or engrave?
Mainly metals. Some plastic works great, some doesn’t. Depends if it has glass in it and what your trying to do to it. Glass filled plastic doesn’t laser very well. I have done plastics, metals, and graphite
@@JS-Tactical-Designs Thanks. I'm looking to get a fiber laser and a Co2 laser. But it good to know that I can get a bit more than l expected from the fiber.
thanks. I have an 8x8 area lens coming with my first fiber laser. what car I expect from it? it is a 50 watt
I’ve done leather with. nice results!
Good content but moving the camera back and forth for no reason was killing me.
Hello excellent channel here. Can you tell me where to buy lenses?
Check the description.
Nice! do you know the marking field for a 110x110 lense?
4.5 inches about.
Nice nice nice vidio
Thank you!
Why don’t you talk about the other 3 lenses and mm size. It’s kind of confusing to me.
Why are there different sizes not a standard sizes everybody uses a different number
You said, you have a couple of lenses and you have 5 lenses not a couple!