Kanga UK Trampoline MK2 - Assembly Instructions 2019
HTML-код
- Опубликовано: 7 авг 2024
- The ALL NEW Kanga Trampoline Online Manual - Assembly Instructions and Construction Video 2019!
For more information and to view the FULL Kanga Trampoline range, see: bit.ly/2vLdMzO
Detailed instructions and directions on how to put together the new range of Kanga trampolines, with time-lapse video included. Featured in this video is the 8ft version and 6ft, 10ft and 12ft variations are available and fit together in the same way.
Kanga Trampolines UK Helpline - 01206 855170
![Megan Thee Stallion - Mamushi (feat. Yuki Chiba) [2024 London Performance]](http://i.ytimg.com/vi/pxTCJUuorKc/mqdefault.jpg)
Doing mine now and noticed that when the ring is completed the ends do not sit flush some are all the way in and others seem to only be halfway in . Also had to get the hammer out to knock the t junctions flush . On your video he seems to push his on with ease
I just finished building this myself. Would have been easier with two people, just to hold things together as it's quite unwieldly to assemble alone, but doable. The hardest part was the first part, putting the main ring together with the T-Joints. After a lot of trial and error i could only get the final T-Joint in place with WD40 and a hammer. You need to make sure these T-Joints are secure and all in place properly, otherwise when you add the springs it will collapse (as i found out), but once they are fitted securely the rest is straight forward. The whole things took me about 2 hours. This video was ok but too fast so you have to pause at every step.
I think T joints should have some screws to secure with each metal ring on either side. It will make the assembly very easy then. Also as it is not secured with screws, is there any chance it may collapse if some one jump on the trampoline?
Be great if u could slow down and actually explain the strapping to the floor part!
I’m with you there. The bit of paper with the written instructions blew away and even pausing the video doesn’t help
Thanks guys. Much appreciated.
I’m going to build it tomorrow;) thanks for instruction
Thanks for letting us know that
I’ve just got off the phone with somebody asking about tying the net down on my 12 footer. Very helpful so I should have it sorted shortly. And the instructions are simple to follow so I dunno where the difficulty is with that. Nice and sturdy and good tension on the mat. I’d recommend them personally
So as to my last comment about it not fitting flush , once I put springs on the frame sat flush
Thank u this really helped me do mine. I really appreciate u
Does any one have the written manual lost all screws need to get new ones please help me
Recommendation. Get some decent tools. A socket & rachet in place of that cheap ring spanner and an impact driver drill in place of the screw driver. A firm mallet also helps for the T joints on the top ring.
Just assembled today, took my own tools but a mallet would have been very helpful 👍
This is the worse thing I have ever put together, as someone else as said the poles do not fit securely into the T Joints and there is a real danger the whole thing will collapse when the main floor and springs are fitted.
Do yourself a favour, if you are reading this..get a refund asap
There is a specific way to fit the T-joints that eliminate this issue. The instructions are however very poor in explaining this. Good product let down by a bad instruction manual. Video not great in my opinion either.
Double speed doesn't really help. Please slow it down!
Notice how it doesn’t show him completing the ring. It’s just a fade to it magically being complete… yeah, f*ck this thing. I think I’m going to send it back.
Christ. Have the 4x2 legged version but the poles barely go into the t-junction. One set goes in and the others fall out. Video contradicts the instructions for first two steps. A nightmare, so far.
Same!! One half almost impossible to fit into the T part! Gave up. Might have to get a mallet on it.... 😬
Same 🤬 ended up banging it in eith a mallet
Strange, just finished mine n they just slotted together with a bit of patience and wiggling.
I whacked mine in place on the patio 😂 argued with the guy on Amazon that parts B And C were missing as they are in the bloody instructions.. so In the few years they still haven’t rectified the instructions and watching the video was far easier than reading that load of mince 😂
Same buddy ,, absolute pish !
This is not for a 6ft trampoline, there is no way 5 rods are for the net, it does not fit it's far to big and does not come into a circle like your video, i need help with it or im returning it, spent a wasted 2 days now trying to get this up
The part where he ties the spring guard to the main body...the guard is too small for that and snapped.
Your paper instructions were like it was for a completely different trampoline missing loads of steps.
Kanga should be ashamed putting such a shoddy product on the market.
How do I get a refund?
It's just not that bloody easy
Absolutely shocking product , the frame doesn’t fit and nothing clicks in . Requested a refund if you have one send it back !!!
Agree with the above, this is a bit of a shit job to assemble - video and instructions suck arse.
Probably a bit OTT but I drilled and pinned the T pieces inside to stop the bloody thing springing apart.
Absolute terrible video. Was a nightmare to build. Might as well throw instructions in the bin. I cant work out how to do the straps to tie it down because the video os at warp speed
Gayyyy
Wait, I have to watch this 2/10 video because your 1/10 booklet is crap. Then you have the audacity to monetise this. Enjoy the 1 star reviews going to put on this monstrosity.
Awful instructions and a video that differs from them.
Ignore the first 2 steps in the video and follow the instructions.
10mm socket is very helpful, as the spanner provided is of cheap quality and some parts need to be "very tight".
took me about 1 and a half hours to build ,would be quicker with a second person.