Very informative video in regards to the various wheel rotation methods. I never have my bolts loosen even without locktight. You just turn the axle 1/4 turn more from the fully tight position and it should be good to go.
Before I saw your video I used Loctite, same kind you suggested. Now, I cannot get my axels to come back through my bearings. I think I used too much Loctite. Any suggestions?
@@brettdobson3122 hey! If they are unscrewing from frame completely but not budging out, I would try to tap them out: come in through threaded side with a skinny metal object (like skate tool) then lightly hammer the axle out by hammering skinny metal object. If axle is not unscrewing then likely need more torque: find a ledge and step onto skate tool while inserted into axle (assuming a sturdy tool like Sonic tool): if you stand on the tool while rotating entire skate with hands while it is hanging off ledge then you will get more torque to spin/disengage axle. Hope you are able to get them unstuck soon!
Very informative video in regards to the various wheel rotation methods.
I never have my bolts loosen even without locktight. You just turn the axle 1/4 turn more from the fully tight position and it should be good to go.
Very useful information!
Before I saw your video I used Loctite, same kind you suggested. Now, I cannot get my axels to come back through my bearings. I think I used too much Loctite. Any suggestions?
@@brettdobson3122 hey! If they are unscrewing from frame completely but not budging out, I would try to tap them out: come in through threaded side with a skinny metal object (like skate tool) then lightly hammer the axle out by hammering skinny metal object.
If axle is not unscrewing then likely need more torque: find a ledge and step onto skate tool while inserted into axle (assuming a sturdy tool like Sonic tool): if you stand on the tool while rotating entire skate with hands while it is hanging off ledge then you will get more torque to spin/disengage axle. Hope you are able to get them unstuck soon!