Get The Most Out of Your Strap Cutter with this Quick Mod! - 4K
HTML-код
- Опубликовано: 27 фев 2021
- In this video I discuss a quick modification to the leatherworking strap cutter. This mod will stop your tool from slipping and allow you to maximize the leather you have on hand! No more ruined belts or straps moving forward!
Please Like, Comment, & Subscribe! Hit the Bell Icon to be notified of all my future videos!
Follow me on Facebook and Instagram
MichaelMaysLeatherworks/
maysleatherworks Хобби
I wish I'd found this video before I attempted to cut my last strap. Thank you very much for the excellent tip!
I took your advice and used your idea. Now I can cut great straps! Thank you again!!
Brilliant idea. Thanks so much for sharing this with us.💜✨
THIS!!! Thank you for sharing this 🙏 such a huge help to me!!
Thank you for leaving a comment! I’m glad the video was helpful.
Late to the video, but I took a slightly different approach with mine. I modified my strap-cutter using a disc cut from a leather offcut, rather than sandpaper. It grips really well.
This is a great tip!
Thank you for the comment. Message me and you guys can sponsor a video or two. 😉 look forward to it!
Great tip and great tool!!
Thank you for your comment. Check out some of my other videos & subscribe if you haven’t already!!
Great tip, thank you.
Thank you for watching and commenting! Please subscribe and check out some of my other videos.
I really dig your videos mate.
thank you so much! Comments like that mean a lot.
My problem is setting the gap for the leather thickness properly. Any tip videos on that?
Thanks for the tips mate. I ordered one a few weeks ago
These are great tools that take the hassle out of cutting straps. It will save you a lot of time
Good tip, I do similar sandpaper tricks in woodworking.
Thanks Wayne. This definitely makes the tool easier to use
All you have to do is tighten the head bolt with a pair of needle nose. I would use leather not sandpaper.
Thank you!
No problem! Thank you for watching!
Nice tip! I'll have to do this. Thank you! P.S. I liked and subscribed. 😊
Thank you! Much appreciated.
@@MichaelMaysLeatherworks , You're welcome!
I just subscribed. Thanks
thank you
How about adding how to load/replace the blades. I have had the worst time doing this. Thanks.
Thanks for the mod..💪💪👍👍🖐️🖐️
My pleasure! Thank you for watching and taking the time to leave a comment. Subscribe if you haven’t already. Working on more content.
@@MichaelMaysLeatherworks I'm Your subscriber..🤗🤗..greetings and all the best..
That’s great, thank you!
OLD LEATHER SMITH here, nice idea, I use a piece of rubber drawer liner, GOD'S BLESSINGS ✝️⚾🙃
Wow that is a good idea also! Thank you for sharing that! God’s blessings to you as well.
I tried this but took it off because the sandpaper was destroying the blade holder.
I was going to make a 10-15 min video on the same subject but instead just decided to tell people to stick a piece of sand paper on the little disk that tightens down in the width adjustment.
too bad i’m sure your video would have been great. Thanks for watching & for your comment.
Price ?
google?
@@MichaelMaysLeatherworks link ?
I don’t sell these items. You can order a strap cutter from Amazon, Tandy Leather, Weaver Leather, or any retailer that sells leather tools.
Price can range from $15 -$500.00 USD depending on what style of cutter you get, what brand, etc.
A ten minute video to say : "Put sandpaper on the clamp head"
Yeah ! You are Welcome 🙏