Wrangler JK Coilover Conversion | Install Overview
HTML-код
- Опубликовано: 8 окт 2018
- Follow along as Justin walks you through the ins and outs of installing the JKS front Coilover Conversion system featuring FOX 2.5 DSC Coilovers. To learn more visit: jksmfg.com/c-1205533-shop-by-v...
Авто/Мото
The more I see all these JK videos with bolt on coil over kits, high steer kits one ton kits, and easily installed long arm kits, the more I realize I messed up buying a TJ.
Pretty sweet stuff. I'd say weld it on after you bolt it up if you want more rigidity. Don't know if its needed though.
I saw a new bolt on kit at sema 2018 no cutting required. Not sure if it’s jks. I’d buy a bolt on one.
Have a part number for the front air bumps?
why do you need a 2" bump stop if you didn't adjust the ride height? DId you lose 2" of upward travel with this mod?
Can I install those coilover on a YJ
What's the total expanded and compressed length eye to eye for those coilovers?
those coilovers are coming for YJ?
Will this JK coilover conversation work with a bilstein 6112 coilover?
What is spring rate on this coilover ? In lbs
What's the price to do that installation on a jeep 2007 ..im on long beach ca ..
Awesome clip, my crawler is my daily driver, thinking about switching to coil overs, will that be too much for my DD?,..
Thanks👍🏿👏🏿🙏🏿❤️
Both on and offroad your ride quality will improve dramatically with a proper coilover conversion. Plus the FOX 2.5 Coilovers in our kit have the optional DSC adjustment to better adapt to your driving style.
@@JKSmanufacturing I'm also thinking of a coilover kit on my 'LD' (Leisure Driver) 2018 JKU. It currenlty has the MOPAR 2: lift with Fox shocks. Good or Bad idea? Also, whats the estimated labor + parts cost(s)?
@@ifp123 It all depends on what you are trying to do with your Jeep, the coilover conversion is a great way to go to overall have a better ride quality/offroad performance but can be near the top end of some budgets. For pricing cost for parts you can visit: jksmfg.com/c-1205533-shop-by-vehicle-wrangler-jk-07-18-coilover-conversion.html
Install cost will vary from shop to shop but typically you are looking at about 6-8 hours of labor by a professional to install them.
@@JKSmanufacturing Why would a coilover improve ride? It lets ride height be adjustable. It gives options in dual-rate springs. But the shock calibrations can be equivalent. But those shouldn't intrinsically change the ride or handling.
WOW.. 1 year later, and the offroad bug has me infected. I now am on an AEV 4" lift with 37" nittos ,HD tie rod, etc., etc. Still don't have a dana 44 yet. I'm doing blue and black rated trails now. I still have those coilovers in mind.
What fenders are those
respect you for UAZ. Prepare it in your own way. Please video about him. With respect from Russia.
Bolt on front suspension...
So, you cut off the factory welded brackets and then bolt on the new coil-over brackets.
What is the long term structural stability and potential for wheel misalignment issues upon doing this?
You all probably dont care at all but does anybody know a tool to get back into an instagram account?
I was dumb forgot the account password. I would love any tricks you can give me!
@Sutton Andre instablaster =)
@Jeffrey Hezekiah Thanks so much for your reply. I found the site thru google and Im in the hacking process atm.
Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.
@Jeffrey Hezekiah it did the trick and I now got access to my account again. Im so happy!
Thanks so much you saved my account :D
@Sutton Andre glad I could help =)
Damn dude put the knife away..
Can i buy just the bolt in brackets...don't need the coil over...going Ori
You sure can,
jksmfg.com/i-24048389-jk-front-coil-over-mounting-kit.html?ref=category:1205533
Nice product. Though, man... use the correct tool for the job. You can see where you scratched the paint on the shocks with your knife. I assume sharp knife against super important rubber o-ring is a common sense no no. Remind me to ask for a different installer when I order mine ;)
Oh no not a scratch 😒
Man I would love to run that on my jeep
You and me both, plus they have the rear coilover kit now as well!
Your President should upgrade axles before anything else. "Watch as we put this high dollar suspension on a Dana 30."
Does the 3.5" lift height kit include 12" coilovers...or is it limited to 10"?
Our JK Coilover Conversions use 10" travel FOX coilovers.
JKS Manufacturing would it be possible to utilize a 12” coilover with the brackets?
@@423XJ You could run a 12" coilover in there with our mounting brackets and that part wouldn't matter as much as going outside our spec for droop travel, you may want to look into a longer drive shaft and just see where things could bind up.
@@JKSmanufacturing Is there a video of rear coil over install?
Cosa costa conversione a coilover
All that money on coil overs.. still rocking stock driveshaft
And a dana 30 lol
Ok so that one bolt for the bracket is close to a open square hole in the frame. That doesn't seem like a good idea and very strong. I see that to be the first place to fail. Especially when rust starts to set in. Which it will eventually.
Narssasistic Asshole
I thought the same. I was waiting for that step bit to blow through that small metal strip.
I do not trust this install design.
Why two brackets instead of one solid receiving bracket for both?
When are the rear appearing ?
Your ig acc shows its coming soon
I see UAZ 31514 :)
Only nuts no welding on the clam
wait wich president does that jeep belong to
That bumpstop @3:00 ....
Is there a version for the TJs??
Right
7 00. УАЗ )) да ну нах . Уважуха Вам .
better use a cutter for the zip tie instead of a knife... why scratch a new and expensive coil-over?
You need to cut the background noise when filming. Cant hear the dude talking.
2 MUCH CUTTING NO THANKS 😂😂😂😂